WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Volkswagen GTI

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

857 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
V871409 20199472017-10-21. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Technical Bulletin (Air Conditioning, Cleaning of the Refrigerant Circuit): In cases where an air conditioning system component (such as a compressor or other system component) has failed and debris from the compressor or component is circulated throughout the refrigerant circuit, the refrigerant circuit must be cleaned of any and all debris or damage to the replacement components will result. Debris can be dispersed throughout the refrigerant circuit after a/c component damage. In order to maintain A/C operating efficiency, it is important to flush the refrigerant circuit after A/C component repairs.
Quick Reference2017-10-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Quick Reference Update Guide: This document informs of the corresponding software/hardware and disc availability to the customer concerns about a vehicle
TT 45-09-042017-10-21. Service bulletin. POWER TRAIN; STEERING. Tech Tips (2009-2015 Jetta, Eos, Rabbit, Golf, GTI, Passat, CC, and Tiguan Equipped with Electromechanical Power Steering ? G85 Location Identification Tip): Ths document informs of the location of the G85 steering sensor. The sensors expected settings, and which vehicles do not have this sensor for electromechanical power steering.
TT 57-10-112017-10-21. Service bulletin. ELECTRICAL SYSTEM. Tech Tips (Comfort Module (J393) or BCM (J519) Replacement): This document informs if a comfort or body control module is replaced during normal diagnosis, make sure the factory mode has been switched OFF. This can be accomplished by selecting guided function of either the J393 or J519 or control module OBD of J393 or J519 then selecting adaptation channel 99. Failure to deactivate factory mode will create a concern where the door locks will not lock and/or unlock with the switch and/or the remotes.
TT 87-14-012017-10-21. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Tech Tips (AC Compressor Replacement, Refrigerant Circuit Flushing Requirement): This document informs when replacing the Air Conditioning compressor it is necessary to flush the entire system to remove all the PAG oil. Replacement AC compressors come with a full charge of oil. Any time another compressor is installed with a different vendor (such as Sanden to Denso) it is necessary to replace all the oil in the system to the new vendor type PAG oil. This document also informs When installing the new AC compressor immediately transfer the AC compressor caps to the original compressor. There is also a photo to show the necessary part placement.
V301402 20313662017-10-21. Service bulletin. POWER TRAIN:CLUTCH ASSEMBLY. Technical Bulletin (Slave Cylinder - Clutch Pedal Operation Diagnosis): Customer may comment: ? Complaints on clutch system. ? After pressing the clutch pedal, it remains on the floor. Due to mis-diagnosis of clutch systems, and to prevent incorrect parts replacement, diagnostic procedure implemented into guided fault finding (GFF). This document is for identifying the issue for diagnosis.
V461405 20102452017-10-21. Service bulletin. SERVICE BRAKES; SUSPENSION. Technical Bulletin (Vibration or Noise When Braking): Vibration or noise when braking may be due to brake disc corrosion protection which has not been completely removed by normal braking or surface rust built up during transportation. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V461406 20151732017-10-21. Service bulletin. SUSPENSION. Technical Bulletin (Brake Disc Pulsation or Vibration): When applying brakes at highway speeds the following symptoms may occur: ? Brake pedal pulsation ? Vibration felt in vehicle body ? Steering wheel shakes For brake vibration or pulsation concerns, brake disc machining is allowed between 6 and 12 months or 6,000 and 12,000 miles (whichever comes first) from the warranty in service date. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V001406 20157802017-10-21. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Technical Bulletin (PDI - Vehicle Inspection, Protection Removal and Detailing): This document informs on the service a vehicle shouold received when it has successfully reached a dealership. ? Inspecting vehicle for damage (to be completed within 48 hours of delivery to Dealership) ? Shipping damage ? Detailers responsibilities (to be completed prior to delivery to Customer) ? Full Body Covers (FBC), removal and disposal ? RAPGARD, removal and disposal ? Paint finish, inspecting for swirl marks ? Exterior glass, cleaning ? Interior, cleaning ? New vehicle detailing products
TT 90-11-072017-10-21. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Tech Tips (Instrument Cluster Illumination): The instrument cluster illumination is controlled by a photocell inside the cluster. If an illumination concern is suspected, this document informs of the procedure necessary to service this issue
TT 44-14-022017-10-21. Service bulletin. SERVICE BRAKES, AIR:ANTILOCK:WHEEL SPEED SENSOR. Tech Tips (ABS/TPMS light is on due to wheel speed sensor fault as a result of the Front Wheel Bearing / Wheel Speed Sensor swapping issue): This document informs of the Damage caused from swapping the speed sensors left to right (or vice versa) during diagnosis.
TT 32-14-012017-10-21. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER. Tech Tips (Torque Converter/Flywheel/Flexplate installation): Incorrect torque converter or flywheel/flexplate installation can result in transmission damage. When installing an engine, flywheel or transmission, please follow the installation procedures outlined in ELSA. This document also contains advice on the installation of these devices
TT 20-13-022017-10-21. Service bulletin. FUEL SYSTEM, GASOLINE. Tech Tips (Fuel line connections): Be aware that fuel lines are color coded on vehicles with return fuel pressure lines. The black line is for fuel pressure supply and the blue line is for fuel pressure return.
V941403 20115212017-10-21. Service bulletin. EQUIPMENT; EXTERIOR LIGHTING. Technical Bulletin (Exterior Lights, Moisture Accumulation): This document informs of the Condensation and or water droplets visible on inside of exterior light lenses. The document also informs how to service the issue.
TT 50-14-012017-10-21. Service bulletin. WHEELS; TIRES. Tech Tips (All vehicles-Tire dressing for vehicle detailing): The use of tire dressing gives your tires that shiny finish that completes the image of a clean (new) vehicle. This document informs that The use of non-water based products will increase the risk of causing damage to painted surfaces. The document also gives graphical examples of the dame that can occur if non-water based products are used.
TT 44-13-042017-10-21. Service bulletin. STEERING. Tech Tips (Steering Wheel Off Center): This Tech Tip was established to explain the influence the adjustable steering column tilt position has on the steering wheel being off center and to provide information on checking for steering wheel off center.
V001706_20337082017-10-21. Service bulletin. EQUIPMENT; STRUCTURE. Update TB to include model year 2016 & 2017 applicability
VIN-4-A-PIN AUGU2017-06-28. Service bulletin. FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS; POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE); BACK OVER PREVENTION: CAMERA SYSTEM; ENGINE; FUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM. MIL-ON, FAULT P013E IN THE ECM CUSTOMER STATES NOISE FORM THE ENGINE/TURBO FUEL GAUGE NOT READING FULL AFTER TOPPING UP FUEL FUEL LINE RATTLE CLUTCH PEDAL SQUEAL/SQUEAK WHEN OPERATING CLUTCH PEDAL MIL-ON P0299 MIL-ON P0101 AND OR P0100 EPC LIGHT P03AF, P03A5, P03B9, P039B CENTER CAP MISSING AFTER PDI MIL-ON P2015 BACK-UP CAMERA
VIN-4-A-PIN AUGU2017-06-28. Service bulletin. ENGINE; POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE); FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS; FUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM. MIL-ON, FAULT P309F OR P309D, NO ELECTRIC DRIVE MODE MIL-ON, FAULT P013E IN THE ECM MIL-ON, FAULT P164B IN ECM CUSTOMER STATES NOISE FORM THE ENGINE/TURBO FUEL GAUGE NOT READING FULL AFTER TOPPING UP FUEL FUEL LINE RATTLE CLUTCH PEDAL SQUEAL/SQUEAK WHEN OPERATING CLUTCH PEDAL MIL-ON P0299 MIL-ON P0101 AND OR P0100 CENTER CAP MISSING AFTER PDI MIL-ON P2015
V011606_20146032017-06-27. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM. UPDATE TECHNICAL BULLETIN TO INCLUDE ALL MODELS FOR 2015, 2016, 2017 MODEL YEAR APPLICABILITY.
TT 911117_2031182017-06-27. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; ELECTRICAL SYSTEM:SOFTWARE. DIRECTIONS TO DEACTIVATE TRANSPORT SAFEGUARD MODE IN REPLACEMENT RADIOS. NO DIRECTIONS TO ADDRESS THIS IN THE REPAIR MANUAL OR SCAN TOOL.
TT 901204_2030722017-06-27. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM. INSTRUCTIONS TO MANUALLY SET SERVICE INTERNAL MAXIMUM VALUES AFTER INSTRUMENT CLUSTER REPLACEMENT, TO PREVENT FALSE MESSAGES TO THE CUSTOMER.
TT 911117_2031182017-06-26. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. DIRECTIONS TO DEACTIVATE TRANSPORT SAFEGUARD MODE IN REPLACEMENT RADIOS. NO DIRECTIONS TO ADDRESS THIS IN THE REPAIR MANUAL OR SCAN TOOL.
TT 901204_2030722017-06-26. Service bulletin. EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. INSTRUCTIONS TO MANUALLY SET SERVICE INTERNAL MAXIMUM VALUES AFTER INSTRUMENT CLUSTER REPLACEMENT, TO PREVENT FALSE MESSAGES TO THE CUSTOMER.
TT 13-16-012017-06-24. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. REMINDER TO FOLLOW THE CORRECT REPAIR PROCEDURE OF PILOT BEARING REPLACEMENT, WHEN REMOVING AND RE-INSTALLING THE DSG TRANSMISSION

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.