WenmarOpen by Wenmar Pro

Service bulletins for the 2014 Volkswagen CC

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

995 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
V001605 20338462018-01-08. Service bulletin. ENGINE. Updated to include additional model year applicability.
V011615 20148152018-01-08. Service bulletin. ENGINE. Update to include additional model year applicability.
TT 21-13-012017-12-14. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. Tech Tips (Equipped with Turbocharged Engine Turbocharger Replacement Tip): If mechanical damage is found to the turbocharger (e.g. damaged compression wheel, loose or broken shaft), it is not enough to just replace the turbocharger. This document informs the procedure of checks for damage.
V271301 20339782017-12-14. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Technical Bulletin (Generator Replacement): This document informs of Charging System inoperative/malfunctions, noise from engine compartment, accessory drive belt damaged or missing. From this condition one or more of the following symptoms are possible * Discharged Battery * No Start * Battery Indicator illuminated in Instrument Cluster * "Low Voltage" DTCs in various control modules * Engine noise * Accessory Drive Belt damaged or missing If a generator is replaced, there must be a confirmed failed GFF Test Plan available, or in the event of a mechanical failure of the component, complete and detailed documentation of the reason for the replacement, which must be submitted into the warranty claim comments.
Maintenance Card2017-12-14. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. 2014 Volkswagen CC Maintenance Schedule For USA 3.6L FSI Engine: This document contains the maintenance service schedule for a vehicle from 10,000 miles to 120,000 miles.
Maintenance Card2017-12-14. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. 2014 Volkswagen CC Maintenance Schedule For USA 2.0L TSI Engine: This document contains the maintenance service schedule for a vehicle from 10,000 miles to 120,000 miles.
TT 17-12-022017-12-14. Service bulletin. ENGINE AND ENGINE COOLING. Tech Tips (Oil Leak From Oil Drain Plug Area After Oil Change and/or Drain Plug Replacement): This document informs an oil leak from around the oil drain plug noted after oil change, and/or drain plug replacement, may be caused by installation of incorrect drain plug. Correct part number drain plug is based on the oil pan design as shown in this document. Original drain plug is 18mm hex for both style oil pans.
V171302 20178132017-12-14. Service bulletin. ENGINE AND ENGINE COOLING. Technical Bulletin (Oil Consumption Measurement): Customer states oil consumption is higher than the Volkswagen oil consumption standard of up to 0.5 quarts per 600 miles, or 0.5 liters per 1000 km. In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically, engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. This document informs of oil consumption tests to check a vehicles performance.
V201306 20340722017-12-14. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. Technical Bulletin Activated Charcoal Filter System, Solenoid Valve 1 -N80- (Canister Purge Valve) Diagnosis): Completing the GFF function test and performing a vacuum check on the Canister Purge Valve -N80- are essential to diagnose proper operation and to avoid unnecessary replacements. This document informs how to perform the Diagnosis check
TT 21-10-012017-12-05. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. Tech Tips 92006-2014 Vehicles with 2.0T Gasoline Engine - N75 Solenoid Valve Diagnosis): When diagnosis on the above engine leads to the testing of the N75, please refer this document with graphical aid. The diagram shows which vacuum ports on the N75 valve should hold vacuum and which ones should not. Turbocharger fault codes P0299 and P0234 can be diagnosed using this test.
V171403 20178132017-12-05. Service bulletin. ENGINE. Technical Bulletin (Oil Consumption Measurement): Customer states oil consumption is higher than the Volkswagen oil consumption standard of up to 0.5 quarts per 600 miles, or 0.5 liters per 1000 km. In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically, engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owners Manual for specific break-in procedures. Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, the ambient temperature and road conditions. Further factors include the amount of oil dilution from water condensation or fuel residue and the oxidation level of the oil. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V011408 20148152017-12-05. Service bulletin. ENGINE. Technical Bulletin The use of contaminated gasoline, seasonal fuel changes (summer/winter fuel) or gasoline with a low content of deposit control additives may result in one or more of the following conditions: -Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. -Engine runs rough after cold start. -Excessive engine cranking time. -Stumbles while driving. -Rough engine idle. -Loss of engine performance. -Poor fuel economy. This document informs of the procedure for the vehicle if it is diagnoised with poor quality gas
V151402 20321502017-12-05. Service bulletin. ENGINE. Technical Bulletin (Proper Removal of Engine Cover to Avoid Breakage): Pulling on the engine cover in some areas can cause damage. This document informs on the procedure to remove the engine cover.
V241703 20451382017-11-12. Service bulletin. ENGINE AND ENGINE COOLING. Remove engine coolant from parts table.
V201503 20314262017-11-08. Service bulletin. ELECTRICAL SYSTEM; ENGINE; FUEL SYSTEM, GASOLINE. Technical Bulletin: High Pressure Fuel Pump Diagnosis. Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements. This document contains the procedure to update the programming on the diagnostic hardware. This document contains the fault codes necessary to check the warranty coverage for servicing this issue.
V871506 20199472017-11-08. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER; ENGINE AND ENGINE COOLING. Technical Bulletin (Air Conditioning, Cleaning of the Refrigerant Circuit (U.S.Only)): In cases where an air conditioning system component (such as a compressor or other system component) has failed and debris from the compressor or component is circulated throughout the refrigerant circuit, the refrigerant circuit must be cleaned of any and all debris or damage to the replacement components will result. This document contains information on how to diagnose, and service this issue.
V871508 20055662017-11-08. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. Technical Bulletin (HVAC, Unpleasant Odor): Unpleasant odor is coming from Heating and Ventilation system. Odor mainly occurs after vehicle has been sitting (unused) at least 5 hours and within 20 to 60 seconds after vehicle is first started. This document contains information on how to diagnose, and service this issue.
TT 27-15-012017-11-08. Service bulletin. POWER TRAIN; ENGINE. Tech Tips (No Crank, No Start After Cold Soak issues): Concern may be the result of a leaking vacuum check valve not holding residual pressure overnight. This results in a hard brake pedal that may require more pressure than usual to allow the vehicle to crank.
TT 21-10-022017-11-08. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER; POWER TRAIN. Tech Tips: The document discusses the conditions of when turbo can to be fixed or replaced
TT 19-13-022017-11-08. Service bulletin. ENGINE AND ENGINE COOLING. Tech Tips (Coolant Leak or Repeat Coolant Leak from the Water Pump Area): The document informs to inspect for issues, and why issues may happen. It also notes how to fix the issue, and other issues that could happen while repairing the issue
V201502 20314262017-11-08. Service bulletin. FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM; ENGINE. Technical Bulletin (High Pressure Fuel Pump Diagnosis): Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements
V001413 20338462017-11-08. Service bulletin. ENGINE. Technical Bulletin (Fuel Additive to Help Prevent Sporadic Misfire Faults): Fuel quality impacts the operating performance, efficiency and service life of the engine. The use of poor quality fuels may result in deposit build up on the fuel injectors and intake valves. This may result in a rough running condition, sporadic misfires, or cold start misfire faults storing in the ECM fault memory. This document informs a Volkswagen approved fuel additive is available to help remove and prevent deposits on fuel injectors and intake valves.
V001401 20338462017-11-08. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER. Technical Bulletin (Fuel Additive to Help Prevent Sporadic Misfire Faults): Fuel quality impacts the operating performance, efficiency and service life of the engine. The use of poor quality fuels may result in deposit build up on the fuel injectors and intake valves. This may result in a rough running condition, sporadic misfires, or cold start misfire faults storing in the ECM fault memory. A Volkswagen approved fuel additive is available to help remove and prevent deposits on fuel injectors and intake valves. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V921503 20373222017-11-08. Service bulletin. ENGINE. Technical Bulletin (Washer Level Sensor issues): The sensitivity of the washer solvent level sensor (G33) can be affected by the type, concentration, and the presence of additives in the washer solvent currently in the tank. The operation of the level sensor relies on the composition of the solvent to provide an accurate message on the solvent level. Incorrect concentration and the presence of additives can contaminate the sensor and reduce its sensitivity. This document discusses the diagnosis, and potential remedy of the issue.
Revised_Oil_Capa2017-11-03. Service bulletin. EQUIPMENT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ENGINE. Job Aid ? VW Engine Oil Capacities (Gasoline, Diesel, Hybrid Engines)

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.