WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Volkswagen Beetle

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1393 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
V301204 20313662019-04-08. Service bulletin. POWER TRAIN; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Technical Bulletin (Slave Cylinder - Clutch Pedal Operation Diagnosis): A Customer may comment: ? Complaints on clutch system. ? After pressing the clutch pedal, it remains on the floor. Due to mis-diagnosis of clutch systems, and to prevent incorrect parts replacement, diagnostic procedure implemented into guided fault finding. This document is meant to inform.
V201201 20313422019-04-08. Service bulletin. FUEL SYSTEM, GASOLINE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Technical Bulletin (TDI Vehicles Equipped with Mis-fuel Inhibitor): Starting in MY 2013 all VW TDI vehicles come equipped with a mis-fuel inhibitor installed in the fuel tank filler neck to prevent accidental mis-fueling of the fuel tank with the incorrect fuel. This document is being published to help answer any questions regarding this component.
V011231 20235912019-04-08. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY. Technical Bulletin (TDI Clean Diesel I/M (Inspection Maintenance) Testing Issues due to Readiness Not Set): Some readiness codes on TDI clean diesel vehicles require special driving conditions to be set. If DTCs have been recently erased from the vehicle?s ECM, it may take additional driving under different conditions to fully set OBD readiness parameters. MVB 89 (on non-UDS protocol ECM?s) will store correct data concerning OBD readiness. This document illustrates how to manually read OBD readiness codes.
Update Bulletin2019-04-08. Service bulletin. EQUIPMENT; VISIBILITY:POWER WINDOW DEVICES AND CONTROLS; EQUIPMENT ADAPTIVE/MOBILITY. UPDATE Technical Bulletin (UPDATE ? 64C7 Window Motors): This update has been proactively released to prevent window(s) entering pinch protection with no obstructions present. The Window "One-touch" does not work properly (window will not go up, or comes down on its own). The production solution for this issue was a New Window Motor design and calibration as of CW35/2012. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
TT 96-12-072019-04-08. Service bulletin. STEERING; EQUIPMENT:ELECTRICAL. Tech Tips (Equipped With KESSY ? Key Adaptation Tip): When adapting keys on a vehicle equipped with KESSY, it is recommended to remove the immobilizer reader coil from behind round cover on steering column trim and insert key inside the reader coil. The steering column trim does not need to be completely removed to access reader coil. For vehicles with the Start/Stop button on the steering column, the Start/Stop button assembly can be removed from column trim without disassembling trim. Start/Stop button connector must be disconnected to allow reader coil to be removed from around button assembly. Start/Stop button should be reconnected during key adaptation. This document provides photo examples of the procedure.
TT 91-12-142019-04-08. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM:SOFTWARE. Tech Tips (Radio Inoperative After UPDATE 91J7 SD Card Software Update): If radio is inoperative after performing UPDATE 91J7, start by checking the current software level of the radio. Software level may have changed during update, so software level must be checked again after update has failed. If radio cannot be reached in Vehicle self-diagnosis, software level can be checked by running GFF and printing or saving diagnostic log. Software level location on GFF log is highlighted in this document.
TT 90-12-042019-04-08. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Tech Tips (Service Interval Settings after Instrument Cluster Replacement): This document informs that after instrument cluster replacement, service interval maximum values may need to be manually set. To set values manually, use Vehicle self-diagnosis to select 17- Instrument Cluster, then adaptation. Channel ?SIA: maximum value of distance to service? should be set to 16000 km and channel ?SIA: maximum value of time to service? should be set to 372 days.
Update Bulletin2019-04-08. Service bulletin. EQUIPMENT. UPDATE Technical Bulletin (UPDATE ? 91J7 RCD 510 (Premium 8) Radio Software): This update has been proactively released to address the following: 1. Bluetooth audio runs in mono mode 2. Bluetooth audio level too high/distorted Bugs contained in Level 07 software for certain Premium 08 radios may cause Bluetooth audio quality complaints. The production solution to this issue was the Introduction of Level 08 software to prevent certain Bluetooth audio quality complaints CW 42/12. This document informs how to install the upgraded software.
Update Bulletin2019-04-08. Service bulletin. EQUIPMENT. UPDATE Technical Bulletin (UPDATE ? 91J7 RCD 510 (Premium 8) Radio Software): This update has been proactively released to address the following: 1. Bluetooth audio runs in mono mode 2. Bluetooth audio level too high/distorted Bugs contained in Level 07 software for certain Premium 08 radios may cause Bluetooth audio quality complaints. The production solution to this issue was an introduction of Level 08 software to prevent certain Bluetooth audio quality complaints CW 42/12.
TT 80-13-022019-04-08. Service bulletin. EQUIPMENT. Tech Tips (Broken or Difficult to Adjust, Dash Panel Air Vents): This document informs when performing repairs on air vents under warranty, it is important to determine if the damage was caused by outside influence or customer abuse. If there are no signs of abuse, please replace the vent(s). DO NOT disassemble or in any way attempt to repair the vent(s).
TT 17-13-012019-04-08. Service bulletin. ENGINE AND ENGINE COOLING. Tech Tips (1.8T or 2.0T engines (CPRA, CPLA, CPPA), No/low oil pressure at idle or oil pressure light on): This document informs to check under the oil filter for the mandrel to be missing. This must be transferred from the old filter and re-installed. The most likely scenario for this to occur is after an oil change.
TT 00-13-042019-04-08. Service bulletin. EQUIPMENT. Tech Tips (All Models 2000-2014 - Part ordering): If a needed service part is on back order, upgrade the daily order to a red order and check the ?Car Down? box to escalate the order. This document informs how to contact VWGoA Parts Specialist for help.
On-car Analysis2019-04-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. On-car analysis list of customer complaints: Transmission Concerns (including clutch assembly, bevel box and Haldex)
On-Car Analysis2019-04-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. On-car analysis list of Customer Complaints: Transmission Concerns (including clutch assembly, bevel box and Haldex)
V211302 20240612019-04-08. Service bulletin. ENGINE AND ENGINE COOLING. Technical Bulletin (Rattling Noises from Engine Compartment Area or Exhaust System): Customers may complain of a rattling noise from engine or exhaust area while accelerating from 1800-3000 RPM. In order to complete proper diagnosis and ensure that the noise is coming from the turbocharger use the procedure in this document.
VWS-13-052019-04-08. Service bulletin. EQUIPMENT:ELECTRICAL. Warranty Information (Volkswagen DoubleCheck Labor Operations): Volkswagen DoubleCheck Labor Operations for All VW Models Except Routan ElsaWeb/Pro was updated on August 12, 2013 with the following Volkswagen DoubleCheck labor operations for all Volkswagen models except Routan. This document informs where in ElsaWeb/Pro this information can be located.
TT 87-11-012019-04-08. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Tech Tips (A/C Control Module Basic Settings): This document informs how to set basic setting on the Climatic control module after replacement for fault code 00898
V191303 20225492019-04-08. Service bulletin. ENGINE AND ENGINE COOLING. Technical Bulletin (Electric Coolant Fans Continue to Run after Ignition is Switched OFF): This document informs it is considered normal operation for the electric coolant fans to continue to run for up to 15 minutes after the ignition is switched off in gasoline engine applications, and up to 16 minutes in diesel engine applications.
V171303 20178132019-04-08. Service bulletin. ENGINE AND ENGINE COOLING. Technical Bulletin (Oil Consumption Measurement): Customers have stated oil consumption is higher than the Volkswagen oil consumption standard of up to 0.5 quarts per 600 miles, or 0.5 liters per 1000 km. This document informs how to test the oil consumption rate
TT 19-13-022019-04-08. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM. Tech Tips (2.0L CCTA/CBFA Coolant Leak or Repeat Coolant Leak from the Water Pump Area): This document informs of the observations that need to be taken to service a water pump replacement
V871301 20055662019-04-08. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Technical Bulletin (HVAC, Unpleasant Odor): An unpleasant odor is coming from Heating and Ventilation system. Odor mainly occurs after vehicle has been sitting (unused) at least 5 hours and within 20 to 60 seconds after vehicle is first started. Contaminants are effectively neutralized using the AIRCOMATIC? II Ultrasonic Climate System Cleaner (VAS 6189A) or AIRCOMATIC III Ultrasonic Climate System Cleaner (VAS 6189B) and AIRCO-CLEAN Ultrasonic HVAC Treatment (30208). All other cleaning methods are no longer permitted. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V011335 20286092019-04-08. Service bulletin. POWER TRAIN. Technical Bulletin (Update Programming for Engine Control Module and Transmission Control Module, for Shudder and/or Slight Hesitation Concerns): Current ECM/TCM programming could be causing slight hesitation related concerns in DSG equipped vehicles (depending on driving conditions). The production solution to this issue is Improved ECM/TCM software to address drivability concerns and slight hesitation complaints. This document discusses the "Fault Codes" necessary to diagnosis, and potential remedy of the issue. The fault codes for checking warranty coverage for servicing the vehicle are also available.
V011333 20348982019-04-08. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. Technical Bulletin (Exhaust Gas Recirculation Flow Insufficient issues): This document informs that high soot loads prior to regeneration can cause possible restrictions in the EGR filter. The production solution to this issue is New software being implemented in current production.
TT 26-13-032019-04-08. Service bulletin. FUEL SYSTEM, DIESEL; ENGINE. Tech Tips (CBEA, CJAA, CKRA engine codes DPF replacement and/or DTCS P2413, P2463): This document informs of the use of aftermarket air filters such as cotton bed steel mesh or cone style, can cause the MAF sensor to not read accurately, affecting vehicle performance and critical monitoring functions for the diesel particulate filter. This can also result in premature DPF failure. Only use factory air filters. The use of aftermarket air filters is not supported as the system was designed and calibrated to work with factory air filters.
On Car Analysis2019-04-08. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. On-car analysis list of Customer Complaints: Transmission Concerns (including clutch assembly, bevel box and Haldex)

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.