Service bulletins for the 2014 Toyota Yaris
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
199 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Body and frame are shown. Show all
| T-SB-0094-21 | 2021-12-13. Service bulletin. STRUCTURE. TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process. |
|---|---|
| T-SB-0044-16 | 2018-07-02. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE. TSB: On some vehicles, when Rapgard? is removed, the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. |
| T-SB-0044-16 | 2018-06-11. Service bulletin. STRUCTURE:BODY. TSB: On some vehicles, when Rapgard? is removed, the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. |
| T-SB-0040-15 Rev | 2018-04-23. Service bulletin. STRUCTURE. TSB: Some 201 - 2015 model year Yaris vehicles may exhibit a condition where there is an excessive gap between the rear bumper and the body due to a partial seperation between the retainer and the bumper cover. Resecuring the rear bumper cover may not sufficiently prevent this gap from returning . The Rear Bumper Retainer has been revised to provide additional retention force to the rear bumper cover. Follow the Repair Procedure in this bulletin to address this concern. |
| T-SB-0044-16_Rev | 2018-04-02. Service bulletin. STRUCTURE:BODY. TSB: REVISION NOTICE March 07, 2017 Rev1: ? Applicability has been updated to include 2017 model year Toyota vehicles. On some vehicles, when Rapgard? is removed the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is NOT necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. |
| T-SB-0040-15-Rev | 2018-04-02. Service bulletin. STRUCTURE:BODY:BUMPERS. TSB: REVISON NOTICE March 02, 2017 Rev2: ? The applicability has been updated to include 2016-2017 model year Yaris vehicles. ? The entire bulletin has been updated. Some 2014 - 2017 model year Yaris vehicles may exhibit a condition where there is an excessive gap between the rear bumper and the body. This is due to a partial separation between the retainer and the bumper cover. Re-securing the rear bumper cover may not sufficiently prevent this gap from returning. The rear bumper retainers have been revised to provide additional retention force to the rear bumper cover. It is also recommended to replace the rear bumper cover during this process. Follow the Repair Procedure in this bulletin to address this condition. |
| T-SB-0304-17 | 2017-11-14. Service bulletin. STRUCTURE:BODY:DOOR. TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. |
| T-SB-0040-08 | 2017-08-14. Service bulletin. STRUCTURE:BODY. TSB: On some vehicles, when Rapgard is removed, the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. |
| T-SB-0040-15 | 2017-08-14. Service bulletin. STRUCTURE; STRUCTURE:BODY:BUMPERS. TSB: Some 2014 - 2015 model year Yaris vehicles may exhibit a condition where there is an excessive gap between the rear bumper and the body due to a partial separation between the retainer and the bumper cover. Resecuring the rear bumper cover may not sufficiently prevent this gap from returning. The Rear Bumper Retainer has been revised to provide additional retention force to the rear bumper cover. Follow the Repair Procedure in this bulletin to address this concern. NOTE-Some uniform gaps between the body and rear bumper cover is permissible and repairing uneven gaps as a result of collision damage is NOT a warrantable condition. |
| T-SB-0040-08 | 2017-08-14. Service bulletin. STRUCTURE:BODY. TSB: On some vehicles, when Rapgard is removed, the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. |
| T-SB-0040-15 | 2017-08-14. Service bulletin. STRUCTURE:BODY:BUMPERS; STRUCTURE:BODY. TSB: Some 2014 - 2015 model year Yaris vehicles may exhibit a condition where there is an excessive gap between the rear bumper and the body due to a partial separation between the retainer and the bumper cover. Resecuring the rear bumper cover may not sufficiently prevent this gap from returning. The Rear Bumper Retainer has been revised to provide additional retention force to the rear bumper cover. Follow the Repair Procedure in this bulletin to address this concern. NOTE-Some uniform gaps between the body and rear bumper cover is permissible and repairing uneven gaps as a result of collision damage is NOT a warrantable condition. |
| T-SB-0040-15 REV | 2017-02-27. Service bulletin. EQUIPMENT; STRUCTURE:BODY:BUMPERS. TSB: SOME 201 - 2015 MODEL YEAR YARIS VEHICLES MAY EXHIBIT A CONDITION WHERE THERE IS AN EXCESSIVE GAP BETWEEN THE REAR BUMPER AND THE BODY DUE TO A PARTIAL SEPERATION BETWEEN THE RETAINER AND THE BUMPER COVER. RESECURING THE REAR BUMPER COVER MAY NOT SUFFICIENTLY PREVENT THIS GAP FROM RETURNING . THE REAR BUMPER RETAINER HAS BEEN REVISED TO PROVIDE ADDITIONAL RETENTION FORCE TO THE REAR BUMPER COVER. FOLLOW THE REPAIR PROCEDURE IN THIS BULLETIN TO ADDRESS THIS CONCERN. |
| T-SB-0066-13A | 2016-06-22. Service bulletin. STRUCTURE:BODY. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |
| T-TT-0246-13 | 2016-04-12. Service bulletin. STRUCTURE:EMERGENCY:ESCAPE/EGRESS/EXIT. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.