WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Toyota Tundra

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

287 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
T-SB-0094-212021-12-13. Service bulletin. STRUCTURE. TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
17-0062020-11-09. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE; SEATS. Rear Seat Entertainment Overhead DVD
T-TT-0570-19 Rev2020-10-26. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; STRUCTURE. TT: Some 2014-2020 model year Tundra vehicles with a TRD skid plate may exhibit a ?creaking? or ?crackling? noise coming from the lower front end. The source of this noise has been pinpointed in several cases to the TRD skid plate contacting the frame crossmember.
T-SB-0030-202020-04-20. Service bulletin. STRUCTURE. TSB: Some 2007 ? 2020 model year Tundra vehicles may exhibit corrosion or paint blistering on the front and/or rear lower door sill(s). Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0144-19_Rev2019-12-16. Service bulletin. STRUCTURE:BODY. TSB: REVISION NOTICE November 05, 2019 Rev1: ? The Warranty Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2007 ? 2020 model year Tundra vehicles may exhibit surface corrosion and/or perforation corrosion on the back of the cab near the lower corner(s) of the center stop lamp assembly. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0144-192019-12-02. Service bulletin. STRUCTURE. TSB: Some 2007 ? 2020 model year Tundra vehicles may exhibit surface corrosion and/or perforation corrosion on the back of the cab near the lower corner(s) of the center stop lamp assembly. Follow the Repair Procedure in this bulletin to address this condition
T-SB-0150-192019-11-18. Service bulletin. STRUCTURE. TBS: Some 2007 ? 2020 model year Tundra (Crew Max) vehicles may exhibit a rust or perforation condition on the vehicle?s body behind the back window moulding. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0570-192019-09-16. Service bulletin. STRUCTURE. TT: Some 2014-2020 Tundra vehicles with a TRD skid plate may exhibit a ?creaking? or ?crackling? noise coming from the lower front end. The source of this noise has been pinpointed in several cases to the TRD skid plate contacting the frame crossmember.
ZH3_Toyota POL172018-07-16. Service bulletin. STRUCTURE:BODY:DOOR. Warranty Policy Bulletin: Toyota has received a number of reports regarding the outside door handles on certain 2008-2015 model year Sequoia vehicles and on certain 2007-2015 model year Tundra vehicles. In these reports, customers have indicated that one or more of the outside door handles exhibited an abnormal feeling, dragging, or sticking when used.
ZH3-Dealer Daily2018-07-02. Service bulletin. STRUCTURE:BODY:DOOR. Dealer Daily Message: ZH3 Warranty Enhancement Program ? Certain 2008 - 2015 Model Year Sequoia Vehicles and Certain 2007 - 2015 Model Year Tundra Vehicles Extension of Warranty Coverage for the Outside Door Handles.
ZH3-POL17-07-04.2018-07-02. Service bulletin. STRUCTURE:BODY:DOOR. Warranty Policy Bulletin POL17-07: Toyota has received a number of reports regarding the outside door handles on certain 2008-2015 model year Sequoia vehicles and on certain 2007-2015 model year Tundra vehicles. In these reports, customers have indicated that one or more of the outside door handles exhibited an abnormal feeling, dragging, or sticking when used.
ZH3-Dealer Lette2018-07-02. Service bulletin. STRUCTURE:BODY:DOOR. Dealer Letter: Toyota has received a number of reports regarding the outside door handles on certain 2008 ? 2015 model year Sequoia vehicles and on certain 2007 ? 2015 model year Tundra vehicles. In these reports, customers have indicated that one or more of the outside door handles exhibited an abnormal feeling, dragging, or sticking when used.
ZH3-Dealer Email2018-07-02. Service bulletin. STRUCTURE:BODY:DOOR; EQUIPMENT. Dealer Email: Toyota is announcing a Warranty Enhancement Program to extend the warranty coverage for the outside door handles on certain 2008 ? 2015 model year Sequoia Vehicles and certain 2007 ? 2015 model year Tundra vehicles.
ZH3-Region Lette2018-07-02. Service bulletin. STRUCTURE:BODY:DOOR. Region Letter: Toyota has received a number of reports regarding the outside door handles on certain 2008 ? 2015 model year Sequoia vehicles and on certain 2007 ? 2015 model year Tundra vehicles. In these reports, customers have indicated that one or more of the outside door handles exhibited an abnormal feeling, dragging, or sticking when used.
T-SB-0044-162018-07-02. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE. TSB: On some vehicles, when Rapgard? is removed, the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture.
T-SB-0161-16_Rev2018-06-18. Service bulletin. STRUCTURE:BODY:DOOR. TSB: REVISION NOTICE May 18, 2018 Rev1: * Applicability has been updated to include 2018 model year Tundra and 2017 - 2018 model year Sequoia vehicles. * The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. Some 2008 - 2018 model year Sequoia and 2007 - 2018 model year Tundra vehicles may exhibit a popping noise during RH or LH front door operation. This noise may be due to a fracture/crack in the plastic over mold of the door check arm by the pivot area. Follow the Repair Procedure in this bulletin to address this condition. NOTE If the vehicle is being repaired due to damage from an accident, this Service Bulletin and the part numbers listed do NOT apply.
T-SB-0044-162018-06-11. Service bulletin. STRUCTURE:BODY. TSB: On some vehicles, when Rapgard? is removed, the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture.
T-SB-0161-162018-04-02. Service bulletin. STRUCTURE:BODY:DOOR. TSB: Some 2008 ? 2016 Sequoia and 2007 ? 2017 model year Tundra vehicles may exhibit a loud popping noise when operating the front doors. Noise is due to a fracture/crack in the plastic over mold of the door check arm by the pivot area. Follow the Repair Procedure in this bulletin to address this condition. NOTE If the vehicle is being repaired due to damage resulting from an accident, this Service Bulletin and part numbers listed do NOT apply. Follow normal parts order and Repair Procedures.
T-TT-0422-162018-04-02. Service bulletin. STRUCTURE. TT: During use, some customers may notice damage to the Spray On Bed Liner (SOBL).
T-SB-0044-16_Rev2018-04-02. Service bulletin. STRUCTURE:BODY. TSB: REVISION NOTICE March 07, 2017 Rev1: ? Applicability has been updated to include 2017 model year Toyota vehicles. On some vehicles, when Rapgard? is removed the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is NOT necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture.
T-SB-0304-172017-11-14. Service bulletin. STRUCTURE:BODY:DOOR. TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
T-SB-0277-172017-10-15. Service bulletin. STRUCTURE:BODY:BUMPERS. TSB: Some 2014 ? 2017 model year Tundra vehicles equipped with clearance warning sonar ultrasonic sensors mounted in metal bumpers may alert that an object is detected when no objects are in the detection area. Follow the procedure in this bulletin to address this condition.
T-SB-0022-152017-08-14. Service bulletin. STRUCTURE:BODY:BUMPERS; EQUIPMENT:ELECTRICAL; BACK OVER PREVENTION. TSB: Some 2014 - 2015 model year Tundra vehicles equipped with Clearance Warning Sonar AND steel bumpers may exhibit a condition where the Clearance Warning Sonar activates without an object inthe detection area. An updated sonar sensor retainer is available to address this condition.
T-SB-0017-152017-08-14. Service bulletin. STRUCTURE:BODY:ROOF AND PILLARS. TSB: Should removal and replacement of the upper B-pillar trim become necessary, follow the procedure in this bulletin to ensure proper installation of the upper B-pillar trim.
T-SB-0040-082017-08-14. Service bulletin. STRUCTURE:BODY. TSB: On some vehicles, when Rapgard is removed, the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.