Service bulletins for the 2009 Toyota Tundra
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
236 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| BST-Region Lette | 2018-12-03. Service bulletin. ENGINE. Region Letter: In our continuing effort to ensure the best in customer satisfaction, Toyota has converted Limited Service Campaign (LSC) BST into Special Service Campaign (SSC) BST with no expiration date. Toyota will install Smart Stop Technology on the below listed model and model year vehicles. This feature will cut engine power in case of simultaneous application of both the accelerator and brake pedals at certain speeds and in certain driving conditions. |
|---|---|
| BST-Region Lette | 2018-12-03. Service bulletin. ENGINE. Region Letter email: In our continuing effort to ensure the best in customer satisfaction, Toyota has converted Limited Service Campaign (LSC) BST into Special Service Campaign (SSC) BST with no expiration date. Toyota will install Smart Stop Technology on the below listed model and model year vehicles. This feature will cut engine power in case of simultaneous application of both the accelerator and brake pedals at certain speeds and in certain driving conditions. |
| T-TT-0414-16-Rev | 2018-12-03. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT. TT: Some customers may encounter Bluetooth® connectivity concerns such as: ? Difficulty to pair the phone. ? Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently. |
| T-SB-0134-16 | 2018-11-26. Service bulletin. ENGINE. TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. |
| BST-TI-Smart Sto | 2018-11-26. Service bulletin. EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM; EQUIPMENT. Technical Instructions: In our continuing effort to ensure the best in customer satisfaction, Toyota has converted Limited Service Campaign (LSC) BST into Special Service Campaign (SSC) BST with no expiration date. Toyota will install Smart Stop Technology on the below listed model and model year vehicles. This feature will cut engine power in case of simultaneous application of both the accelerator and brake pedals at certain speeds and in certain driving conditions. |
| BST-Dealer Packa | 2018-11-26. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL; EQUIPMENT. Dealer Package: In our continuing effort to ensure the best in customer satisfaction, Toyota has converted Limited Service Campaign (LSC) BST into Special Service Campaign (SSC) BST with no expiration date. Toyota will install Smart Stop Technology on the below listed model and model year vehicles. This feature will cut engine power in case of simultaneous application of both the accelerator and brake pedals at certain speeds and in certain driving conditions. |
| BST-Dealer Packa | 2018-11-26. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; EQUIPMENT:ELECTRICAL. Dealer Package email: In our continuing effort to ensure the best in customer satisfaction, Toyota has converted Limited Service Campaign (LSC) BST into Special Service Campaign (SSC) BST with no expiration date. Toyota will install Smart Stop Technology on the below listed model and model year vehicles. This feature will cut engine power in case of simultaneous application of both the accelerator and brake pedals at certain speeds and in certain driving conditions. |
| BST-Region Lette | 2018-11-26. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL. Region Letter: In our continuing effort to ensure the best in customer satisfaction, Toyota has converted Limited Service Campaign (LSC) BST into Special Service Campaign (SSC) BST with no expiration date. Toyota will install Smart Stop Technology on the below listed model and model year vehicles. This feature will cut engine power in case of simultaneous application of both the accelerator and brake pedals at certain speeds and in certain driving conditions. |
| BST-Region Lette | 2018-11-26. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; EQUIPMENT:ELECTRICAL. Region Letter email: In our continuing effort to ensure the best in customer satisfaction, Toyota has converted Limited Service Campaign (LSC) BST into Special Service Campaign (SSC) BST with no expiration date. Toyota will install Smart Stop Technology on the below listed model and model year vehicles. This feature will cut engine power in case of simultaneous application of both the accelerator and brake pedals at certain speeds and in certain driving conditions. |
| Safety Recall an | 2018-10-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT. Update on Technician Certification Requirements. |
| PG006-01-Obsolet | 2018-10-15. Service bulletin. EQUIPMENT:OTHER:LABELS; EQUIPMENT. Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17. |
| PG004-97-Obsolet | 2018-10-15. Service bulletin. EQUIPMENT; EQUIPMENT:OTHER:LABELS. Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17. |
| T-SB-0304-17_Rev | 2018-08-20. Service bulletin. EQUIPMENT. TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen. |
| T-SB-0057-18 | 2018-08-20. Service bulletin. EQUIPMENT. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0043-14. ? Applicability has been updated to include 2017 ? 2018 model year Toyota vehicles. Service Bulletin No. T-SB-0043-14 is obsolete and any printed versions should be discarded. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE New security provisions are required to obtain a reset passcode. It is critical to review the instructions for this new process BEFORE attempting to get a passcode in the new system. |
| ZH3_Toyota POL17 | 2018-07-16. Service bulletin. STRUCTURE:BODY:DOOR. Warranty Policy Bulletin: Toyota has received a number of reports regarding the outside door handles on certain 2008-2015 model year Sequoia vehicles and on certain 2007-2015 model year Tundra vehicles. In these reports, customers have indicated that one or more of the outside door handles exhibited an abnormal feeling, dragging, or sticking when used. |
| ZH3-Dealer Daily | 2018-07-02. Service bulletin. STRUCTURE:BODY:DOOR. Dealer Daily Message: ZH3 Warranty Enhancement Program ? Certain 2008 - 2015 Model Year Sequoia Vehicles and Certain 2007 - 2015 Model Year Tundra Vehicles Extension of Warranty Coverage for the Outside Door Handles. |
| ZH3-POL17-07-04. | 2018-07-02. Service bulletin. STRUCTURE:BODY:DOOR. Warranty Policy Bulletin POL17-07: Toyota has received a number of reports regarding the outside door handles on certain 2008-2015 model year Sequoia vehicles and on certain 2007-2015 model year Tundra vehicles. In these reports, customers have indicated that one or more of the outside door handles exhibited an abnormal feeling, dragging, or sticking when used. |
| ZH3-Dealer Lette | 2018-07-02. Service bulletin. STRUCTURE:BODY:DOOR. Dealer Letter: Toyota has received a number of reports regarding the outside door handles on certain 2008 ? 2015 model year Sequoia vehicles and on certain 2007 ? 2015 model year Tundra vehicles. In these reports, customers have indicated that one or more of the outside door handles exhibited an abnormal feeling, dragging, or sticking when used. |
| ZH3-Dealer Email | 2018-07-02. Service bulletin. STRUCTURE:BODY:DOOR; EQUIPMENT. Dealer Email: Toyota is announcing a Warranty Enhancement Program to extend the warranty coverage for the outside door handles on certain 2008 ? 2015 model year Sequoia Vehicles and certain 2007 ? 2015 model year Tundra vehicles. |
| ZH3-Region Lette | 2018-07-02. Service bulletin. STRUCTURE:BODY:DOOR. Region Letter: Toyota has received a number of reports regarding the outside door handles on certain 2008 ? 2015 model year Sequoia vehicles and on certain 2007 ? 2015 model year Tundra vehicles. In these reports, customers have indicated that one or more of the outside door handles exhibited an abnormal feeling, dragging, or sticking when used. |
| ZH3-Region Email | 2018-07-02. Service bulletin. EQUIPMENT. Region Email: Toyota is announcing a Warranty Enhancement Program to extend the warranty coverage for the outside door handles on certain 2008 ? 2015 model year Sequoia Vehicles and certain 2007 ? 2015 model year Tundra vehicles. |
| T-SB-0047-16 | 2018-07-02. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. TSB: The breather plug should be replaced during any differential/transfer case repairs to prevent possible repeat failures. The subsequent use of the original breather plug after a repair has been found to contribute to the failure of the differential/transfer case components. Replace the breather plug when replacing differential/transfer case components. |
| T-SB-0161-16_Rev | 2018-06-18. Service bulletin. STRUCTURE:BODY:DOOR. TSB: REVISION NOTICE May 18, 2018 Rev1: * Applicability has been updated to include 2018 model year Tundra and 2017 - 2018 model year Sequoia vehicles. * The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. Some 2008 - 2018 model year Sequoia and 2007 - 2018 model year Tundra vehicles may exhibit a popping noise during RH or LH front door operation. This noise may be due to a fracture/crack in the plastic over mold of the door check arm by the pivot area. Follow the Repair Procedure in this bulletin to address this condition. NOTE If the vehicle is being repaired due to damage from an accident, this Service Bulletin and the part numbers listed do NOT apply. |
| T-SB-0047-16 | 2018-06-11. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. TSB: The breather plug should be replaced during any differential/transfer case repairs to prevent possible repeat failures. The subsequent use of the original breather plug after a repair has been found to contribute to the failure of the differential/transfer case components. Replace the breather plug when replacing differential/transfer case components. |
| ZTQ_Warranty Pol | 2018-06-11. Service bulletin. POWER TRAIN; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT; ENGINE. Warranty Policy Bulletin (POL11-05): Toyota has received reports of customer concerns regarding the illumination of the check engine light (Malfunction Indicator Light) due to moisture/water in the Air Injection Pumps and/or Air Switching Valves in the engines of a number of these vehicles. T-SB-0160-11 has been released to assist dealers in the diagnosis and repair of these vehicles. However, some of the vehicles covered by T-SB-0160-11 may be outside of Toyota?s New Vehicle Limited Powertrain Warranty and California Emission Warranty due to age and/or mileage. To assure customers that we stand behind our product, we are offering a warranty extension on the Air Injection Pumps and Air Switching Valves on 2007-2010 Tundra and 2008-2010 Sequoia vehicles. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.