Service bulletins for the 2018 Toyota Tacoma
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
294 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Body and frame are shown. Show all
| T-SB-0021-19 | 2019-04-15. Service bulletin. STRUCTURE. TSB: Some 2016 ? 2019 model year Tacoma vehicles may exhibit corrosion or paint blistering on the front and/or rear lower door sill(s). Follow the Repair Procedure in this bulletin to address this condition |
|---|---|
| T-SB-0055-18_Rev | 2019-03-18. Service bulletin. STRUCTURE; EQUIPMENT. TSB: REVISION NOTICE February 6, 2019 Rev2: ? The Production Change Information section has been updated. September 12, 2018 Rev1: ? The Warranty Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2018 model year Tacoma vehicles equipped with an LED type center high mount stop lamp may exhibit a water leak into the rear of the cab. Upon closer inspection, it may become apparent that the water leak is coming from the space between the center high mount stop lamp and the body of the vehicle. Follow the Repair Procedure in this bulletin to address this condition. |
| T-TT-0510-18 | 2019-01-07. Service bulletin. STRUCTURE. TT: Precautions regarding lift point interference with frame hole plugs: To help prevent water from entering the vehicle's frame, hole plugs are installed in certain locations of the frame during manufacturing. ? One of the hole plug styles allow water to drain from the bottom of the frame yet block water from entering. ? This one-way drain plug is located near a usable frame lift point. If the technician does not take note of the location of one-way drain plug, it may be easily crushed by the shop lift's arm. |
| T-TT-0490-18 | 2018-12-17. Service bulletin. STRUCTURE; SUSPENSION. TT: Some vehicles may exhibit a squeak or rattle noise from the FR RH Body Mount Bushing when driving over uneven roads or bumps. Make sure to confirm that noise is coming from RH FR (No.1) Body Mount Bushing before proceeding. |
| T-SB-0055-18-Rev | 2018-12-03. Service bulletin. STRUCTURE. TSB: REVISION NOTICE September 12, 2018 Rev1: ? The Warranty Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2018 model year Tacoma vehicles equipped with an LED type center high mount stop lamp may exhibit a water leak into the rear of the cab. Upon closer inspection, it may become apparent that the water leak is coming from the space between the center high mount stop lamp and the body of the vehicle. Follow the Repair Procedure in this bulletin to address this condition. |
| T-TT-0490-18-Rev | 2018-10-22. Service bulletin. STRUCTURE; SUSPENSION. TT: Some 2016-2018 model year Tacoma vehicles may exhibit a squeak or rattle noise from the FR RH (No.1) Body Mount Bushing when driving over uneven roads or bumps. Make sure to confirm that the noise is coming from the FR RH (No.1) Body Mount Bushing before proceeding. |
| T-SB-0055-18 | 2018-08-20. Service bulletin. STRUCTURE. TSB: Some 2016 ? 2018 model year Tacoma vehicles equipped with an LED type center high mount stop lamp may exhibit a water leak into the rear of the cab. Upon closer inspection, it may become apparent that the water leak is coming from the space between the center high mount stop lamp and the body of the vehicle. Follow the Repair Procedure in this bulletin to address this condition. |
| T-TT-0477-18 | 2018-04-02. Service bulletin. STRUCTURE:BODY:BUMPERS. TT: Some customers may complain that the gap between the bed and rear bumper or bed and cab is too large or uneven from left to right. This Tech-Tip is to request measurement data when reporting gap complaints. |
| T-SB-0304-17 | 2017-11-14. Service bulletin. STRUCTURE:BODY:DOOR. TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.