Service bulletins for the 2018 Toyota Sienna
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
300 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| T-SB-0073-18 | 2018-08-20. Service bulletin. ENGINE AND ENGINE COOLING. TSB: Some 2016 ? 2018 model year Tacoma, 2017 ? 2018 model year Sienna, Highlander, and 2018 model year Camry vehicles equipped with a 2GR-FKS engine may exhibit an engine oil leak from the cam sensor bolt hole(s). Follow the Repair Procedure in this bulletin to address this condition. |
|---|---|
| T-SB-0235-17_Obs | 2018-08-20. Service bulletin. EQUIPMENT. TSB: OBSOLETE NOTICE July 20, 2018: This bulletin is now obsolete. Please see T-SB-0068-18. |
| T-SB-0068-18 | 2018-08-20. Service bulletin. ELECTRICAL SYSTEM. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0235-17. ? Applicability has been updated to include 2019 model year Toyota vehicles. Service Bulletin No. T-SB-0235-17 is obsolete and any printed versions should be discarded. An initialization procedure is required to activate the Entune 3.0, App Suite Connect for Entune 3.0, Audio Entune 3.0 , Audio Plus, and Entune 3.0 Premium Audio head units before they are used for the first time on new vehicles. The initialization procedure may also be performed under other circumstances, such as following a head unit replacement or after the customer?s personal settings are erased. The initialization procedure requires between 3 and 15 minutes to complete, depending on file size, cellular connection speed, and other factors. A Wi-Fi connection is recommended for optimal functionality when downloading software via a smartphone. Download the latest Entune? 3.0 app onto the smartphone. Following the initialization procedure, individual Entune 3.0 apps may periodically update through an over-the-air update system. Updates are optional or mandatory. The update procedure will take approximately 1 minute for each app requiring an update. Follow the procedure in this bulletin to perform the initialization and app updates. Additionally, a Safety Connect static cling is available to increase customer awareness. This bulletin also includes the vehicle identification process for Safety Connect-equipped vehicles and the static cling installation procedure. |
| T-SB-0057-18 | 2018-08-20. Service bulletin. EQUIPMENT. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0043-14. ? Applicability has been updated to include 2017 ? 2018 model year Toyota vehicles. Service Bulletin No. T-SB-0043-14 is obsolete and any printed versions should be discarded. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE New security provisions are required to obtain a reset passcode. It is critical to review the instructions for this new process BEFORE attempting to get a passcode in the new system. |
| T-TT-0442-17 | 2018-07-02. Service bulletin. EQUIPMENT; EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM. TT: Safety Connect is a vehicle option which requires a subscription fee for the system to be active. The first year of service is provided in the vehicle purchase price. Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service. |
| T-TT-0441-17 | 2018-07-02. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. TT: During previous air conditioning service, leakage prevention agent (A/C stop leak) may have been added to the A/C system. Adding stop leak products to the A/C system is not a recommended or approved Toyota repair process. During A/C service, moisture enters the A/C system, and can react with the previously added A/C stop leak, forming a gelatinous substance. The gel substance that forms can cause the A/C compressor to bind and or seize. |
| Toyota Safety Re | 2018-06-18. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Safety Recall and Service Campaign - Technician Certification Requirements. |
| T-TT-0498-18 | 2018-06-18. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. TT: Some customers may experience issues using Entune or Scout functions of the head unit. The following is a diagnostic supplement to assist in understanding how to diagnose this system. |
| T-TT-0497-18 | 2018-06-18. Service bulletin. SEATS. TT: Some vehicles may experience a condition in which the 2nd row seat, with center seat, exhibits a chirp/squeak noise from the rear seat latches (floor area). This condition is present while driving over rough or bumpy roads. Upon further inspection, after removal of the LH 2nd row seat, the rear inboard and outboard strikers may show signs of the coating peeling off as shown in Fig.2 and Fig.3. |
| T-TT-0442-17_Rev | 2018-06-18. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. TT: Safety Connect is a vehicle option which requires a subscription fee for the system to be active. The trail period of service is provided upon the vehicle purchase. Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service. If registration of the replacement DCM part is attempted using the Techstream utility after the account has become inactive, the registration will fail, and messages such as "ATX webserver is Down" or "ATX error" will be displayed. |
| T-SB-0033-18 | 2018-06-18. Service bulletin. SERVICE BRAKES. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0045-14. * Applicability has been updated to include 2018 model year Sienna vehicles. * The entire bulletin has been updated. Service Bulletin No. T-SB-0045-14 is obsolete and any printed versions should be discarded. Some 2011 - 2018 model year Sienna vehicles may exhibit a vibration/pulsation from the front brakes that can be felt in the brake pedal while lightly applying the brake pedal. Follow the Repair Procedure in this bulletin to address this condition. |
| T-TT-0472-17 | 2018-06-11. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. TT: Some customers may experience an inoperative Entune? Apps Suite after connecting an Apple device with iOS version 11.2 or later via USB tethering. |
| T-TT-0470-17 | 2018-06-11. Service bulletin. ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES:DOORS:LATCH. TT: All grades of 2018MY Sienna vehicles are not compatible with Entune? 3.0 Remote Connect app features. The Toyota Entune? 3.0 Remote Connect mobile app lets you lock and unlock doors, start the engine, find your vehicle in a parking lot, and monitor guest drivers. |
| T-SB-0229-12_Rev | 2018-04-23. Service bulletin. ELECTRICAL SYSTEM. TSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Toyota vehicle becomes submerged in water, many components may be physically damaged. Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent malfunction. Although any flooding can be damaging, salt water flooding elevates the potential for abnormal conditions and may increase risks due to its highly corrosive and conductive nature. Salt residue also continues to corrode and remain conductive even after a vehicle dries. This bulletin is intended to assist with safe handling and inspection of flood damaged vehicles and to provide basic guidance on likely needed repairs. |
| T-TT-0463-17 | 2018-04-23. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER; ENGINE AND ENGINE COOLING. T-TT: Some vehicles may exhibit an abnormal HVAC blower motor noise. |
| T-SB-0233-17_Rev | 2018-04-02. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. TSB: REVISION NOTICE August 14, 2017 Rev1: Applicability has been updated to exclude 2018 model year Avalon vehicles. The Repair Procedure section has been updated. Any previous printed versions of this bulletin should be discarded. NOTE This Service Bulletin ONLY applies to models equipped with Service Connect and Entune 3.0 Audio Plus or Entune 3.0 Premium Audio. When a maintenance alert occurs, a message displays on the head unit with the ?Call Dealer? button. It is important to program the dealer contact information into the head unit to ensure that the customer can schedule service. |
| T-SB-0235-17_Rev | 2018-04-02. Service bulletin. EQUIPMENT:ELECTRICAL. TSB: REVISION NOTICE July 20, 2017 Rev1: Applicability has been updated to exclude 2018 model year Avalon vehicles. An initialization procedure is required to activate the Entune? App Suite Connect for Entune? 3.0 Audio, Entune? 3.0 Audio Plus and Entune? 3.0 Premium Audio head units before they are used for the first time on new vehicles. |
| T-SB-0196-17 | 2018-04-02. Service bulletin. EQUIPMENT. TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle's system and components. Any problems that are found should be corrected immediately. |
| T-SB-0188-17 | 2018-04-02. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. TSB: 2018 model year vehicles are equipped with driver?s side floor mat retaining clips to secure the floor mat in the correct position. In addition, some models may utilize retaining clips for passenger side and rear seat floor mats as well. Follow the appropriate Installation Procedure to attach the driver?s side, and if applicable the passenger?s side and rear seat floor mats to the vehicle carpet using the floor mat retaining clips during Pre-Delivery Service (PDS). |
| T-TT-0435-17 | 2018-04-02. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). TT: This bulletin is regarding best practices when handling navigation systems that use Hard Disc Drive or Micro SD Card memory. |
| T-SB-0185-17 | 2018-04-02. Service bulletin. EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES. TSB: Some 2018 model year vehicles are equipped with a Smart Key system, which allows the customer to enter and start the vehicle without using a mechanical key. To ensure the system is operating properly, the Smart Key functions (Smart Entry and Smart Start) should be inspected using the following procedure during Pre-Delivery Service (PDS). |
| T-SB-0187-12_Rev | 2018-04-02. Service bulletin. TIRES. TSB: REVISION NOTICE February 12, 2018 Rev2: ? Applicability has been updated to include 2015 ? 2018 model year vehicles. January 23, 2014 Rev1: ? Applicability has been updated to include 2013 ? 2014 model year vehicles. Any previous printed versions of this bulletin should be discarded. Toyota vehicles are equipped with either conventional or run-flat tires. Sometimes punctures may occur as a result of contact with road debris or other hazards. If a puncture occurs, it may be possible to repair the tire and return it to service. With a conventional tire it is not possible to drive for an extended amount of time with the tire at low pressures as damage to the tire may occur. With run-flat tires, due to reinforced sidewalls, it is possible to drive for up to 100 miles at speeds less than 55 mph with little or no damage to the tire. The U.S. Tire Manufacturers Association (UTSMA) provides guidelines and recommendations for tire repair and replacement. It also provides information related to: ? Basic tire information ? Tire maintenance and safety ? Driver education, tire safety curriculum. |
| T-SB-0009-18 | 2018-04-02. Service bulletin. EQUIPMENT. TSB: The purpose of this Service Bulletin is to elevate awareness and provide best practices for leather and synthetic leather care in Toyota vehicles. As an additional resource, if the vehicle is equipped with factory leather seats, the vehicle Owner?s Manual will highlight the importance of proper maintenance and provide guidance for care. |
| T-SB-0001-18_Rev | 2018-04-02. Service bulletin. ELECTRICAL SYSTEM. TSB: REVISION NOTICE February 02, 2018 Rev1: ? Applicability has been updated to include 2018 model year Sienna vehicles. ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. When completing a transaxle assembly replacement, Engine Control Module (ECM) (SAE term: Powertrain Control Module [PCM]) replacement, or ECM (PCM) reprogram, ensure the correct ECM (PCM) software is matched with the transaxle assembly hardware. Some 2017 ? 2018 model year Highlander and Sienna vehicles require different ECM (PCM) software based on the transaxle assembly hardware installed in the vehicle. NOTICE Mismatched transaxle assembly hardware and ECM (PCM) software combinations may result in a harsh shift or shift flare. If this occurs after the original repair, additional ECM (PCM) replacement and reprogramming will be required. This additional ECM (PCM) replacement and/or reprogramming is NOT covered under warranty. Use the information in this Service Bulletin to confirm that the correct ECM (PCM) hardware and software are used based on the transaxle assembly part number and serial number. |
| T-SB-0195-17 | 2018-04-02. Service bulletin. ELECTRICAL SYSTEM. TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharges and/or failed batteries due to lack of maintenance. It is the dealer's responsibility to maintain the specific State-Of-Charge (SOC) of the vehicle's battery while in stock and assure proper SOC at delivery. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.