WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Toyota Sequoia

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

363 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
T-SB-0033-12 Rev2018-04-23. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2012 ? 2013 model year Sequoia and Tundra vehicles with the 3UR-FE/FBE (5.7 L) engine may exhibit a MIL ?ON? condition with Diagnostic Trouble Code (DTC) P2440/P2442 (Secondary Air Injection System Switching Valve Stuck Open Bank 1/Bank 2) under freezing ambient conditions. The Engine Control Module/ECM (SAE term: Powertrain Control Module/PCM) logic has been revised to address this condition. Use the following repair procedure to reprogram the ECM (PCM).
T-TT-0058-10 Rev2018-04-23. Service bulletin. POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE). 4WD System Inoperative
T-SB-0058-13 Rev2018-04-23. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE. Some 2012 ? 2013 model year Sequoia and Tundra vehicles with the 3UR-FBE engine may exhibit a MIL ?ON? condition with Diagnostic Trouble Codes (DTCs) P0171/P0174 (System too Lean Bank 1/ Bank 2), P0172/P0175 (System too Rich Bank 1/Bank 2), P1604 (Startability Malfunction), and/or P1605 (Rough Idling) after attempting to start the engine. Alcohol Density Estimate values may be high even though the vehicle was fueled with regular fuel (E0/E10). The Engine Control Module/ECM (SAE term: Powertrain Control Module/PCM) logic has been modified to address this condition. Use the following Repair Procedure to reprogram the ECM (PCM).
T-SB-0229-12_Rev2018-04-23. Service bulletin. ELECTRICAL SYSTEM. TSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Toyota vehicle becomes submerged in water, many components may be physically damaged. Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent malfunction. Although any flooding can be damaging, salt water flooding elevates the potential for abnormal conditions and may increase risks due to its highly corrosive and conductive nature. Salt residue also continues to corrode and remain conductive even after a vehicle dries. This bulletin is intended to assist with safe handling and inspection of flood damaged vehicles and to provide basic guidance on likely needed repairs.
T-SB-0133-14_Obs2018-04-23. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). TSB: OBSOLETE NOTICE November 16, 2017: This bulletin is now obsolete. Please see T-SB-0294-17.
T-SB-0012-13 Rev2018-04-02. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. TSB: OBSOLETE NOTICE: September 14, 2016: This bulletin is now obsolete. Please see T-SB-0134-16.
T-SB-0142-13 Rev2018-04-02. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. TSB: REVISION NOTICE November 10, 2016 Rev2: ? Applicability has been updated to include 2016 ? 2017 model year Toyota vehicles. ? Parts Information section has been updated. Some 2004 ? 2017 model year Toyota vehicles may exhibit odors naturally occurring from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.
T-SB-0161-162018-04-02. Service bulletin. STRUCTURE:BODY:DOOR. TSB: Some 2008 ? 2016 Sequoia and 2007 ? 2017 model year Tundra vehicles may exhibit a loud popping noise when operating the front doors. Noise is due to a fracture/crack in the plastic over mold of the door check arm by the pivot area. Follow the Repair Procedure in this bulletin to address this condition. NOTE If the vehicle is being repaired due to damage resulting from an accident, this Service Bulletin and part numbers listed do NOT apply. Follow normal parts order and Repair Procedures.
T-TT-0424-162018-04-02. Service bulletin. WHEELS:LUGS/NUTS/BOLTS/STUDS. TT: Front Brake Vibration Key Points: * Issue can occur at any time if improper torque is applied on lug nuts * Over time, even one lug nut over or under torqued, can cause a vibration issue * When lug nuts are over torqued, this causes the rotor to have a runout out condition which can lead to brake vibration concerns * Brake vibration issues can occur at parking lot to highway speeds * Brake vibration issues can occur at light to moderate braking * Tightening lug nuts in a star pattern method during the torqueing process will assure that even/equal pressure is applied across the rotor hub surface * Torque sticks/wrenches should be used to apply accurate torque values when tightening * Do Not use impact guns/ratchets to completely run lug nuts up to the wheel surface
T-TT-0010-10 Rev2018-04-02. Service bulletin. BACK OVER PREVENTION; ENGINE. Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position Sensor Circuit) and/or P0340 (Camshaft Position Sensor Circuit) due to inconsistent rotational speed of the engine's crankshaft.
T-SB-0012-13 Rev2018-04-02. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
T-TT-0246-13 Rev2018-04-02. Service bulletin. VISIBILITY; ELECTRICAL SYSTEM. Tech Tip: Tips for writing a DPR (Dealer Product Report) on manufacturing issues for windows and windshields.
T-TT-0262-13 Rev2018-04-02. Service bulletin. ENGINE. Tech Tip: Starting with the 2010 Model Year, Toyota began a gradual transition to the use of synthetic 0w20 viscosity engine oil. There are multiple benefits of this oil including: Reduced friction and wear on engine surfaces, Improved fuel economy, Reduction in waste oil stream (in vehicles approved for 10,000 mile oil change intervals), Reduced maintenance cost (in vehicles approved for 10,000 mile oil change intervals). Due to the improved performance and durability of 0w20 synthetic oil, Toyota has extended the oil change intervals to 10,000 mile for most vehicles that require this oil. With this change, the following should be noted: The 2TR-FE (4Runner/Tacoma) and the 3UR-FBE (Flex Fuel Tundra/Sequoia) are the exceptions to this new change interval program; these engines have not been approved for the 10,000 mile interval at this time. A 5,000 mile oil change interval is still required for these vehicles. Also, the Flex Fuel 3UR-FBE requires a 2,500 mile interval when operated on E85 50% of the time or more. Only Toyota vehicles in which 0w20 oil is mandatory (except for the 2TR-FE & 3UR-FBE Engines) have been approved for extended oil change intervals. Vehicles in which 0w-20 is an option to 5w20 (or 5w30) will continue to require 5,000 mile change intervals, even if 0w20 oil is used. In case of vehicles with 10,000 mile oil change intervals, the 5,000 mile service interval has not been eliminated. The traditional 5,000 mile maintenance procedures (such as tire rotation) will continue to be required, and the fluid levels (including engine oil) will need to be checked and adjusted at this time. If the vehicle operation meets the standard criteria for "Special Operating Conditions" such as: driving off-road, on dirt roads, towing a trailer, making repeated short trips under 32 degrees F, or extensive idling, the engine oil must be replaced at 5,000 mile intervals, regardless of oil used.
T-TT-0180-12 Rev2018-04-02. Service bulletin. EQUIPMENT. Tech Tip: When replacing the Hard Disk Drive (HDD) or Navigation Unit (Navi Unit) follow the instructions below:
T-SB-003-01 - OB2018-04-02. Service bulletin. UNKNOWN OR OTHER. TSB: OBSOLETE NOTICE: July 7, 2014: This bulletin is now obsolete.
T-SB-0043-14 Rev2018-04-02. Service bulletin. EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES. TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
T-SB-0043-142018-04-02. Service bulletin. EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES. TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
T-SB-0294-172018-04-02. Service bulletin. EQUIPMENT. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0133-14. ? The Parts Information, Required Tools & Equipment, and On-Vehicle Navigation Update sections have been updated. Toyota models equipped with the Premium HDD Navigation (AVN/AW-EMV) system require a Special Service Tool (SST) USB drive to update the map, points of interest, Gracenote®, and system software. The SST is used with all vehicles to deliver the update; however, a unique activation number is required for each vehicle. Activation numbers are provided in an Activation Card Number pamphlet available through the normal parts ordering system.
T-SB-0108-15_Rev2018-04-02. Service bulletin. EQUIPMENT. TSB: REVISION NOTICE October 11, 2017 Rev2: ? The Required Tools & Equipment section has been updated to include a NEW USB drive map update. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0006-13. Toyota models equipped with the Premium HDD Navigation (AVN/AW-EMV) system will periodically require an update to the Gracenote® database. Gracenote® includes detailed information for songs (genre, artist, song title, album name, etc.). The Gracenote® update will be included on the USB Drive Navigation Map Update SST. A Gracenote® update MUST be performed BEFORE a Navigation Map update. A Navigation Map update is NOT required to complete the Gracenote® update.
T-SB-0202-17_Rev2018-04-02. Service bulletin. LATCHES/LOCKS/LINKAGES:DOORS:LATCH. TSB: REVISION NOTICE October 6, 2017 Rev1: ? The Parts Information and Repair Procedure sections have been updated. Some 2007 ? 2015 model year Tundra and 2008 ? 2015 model year Sequoia vehicles may exhibit an abnormal feeling, dragging, or sticking when using the outside door handle.
ZH3_Toyota POL172018-04-02. Service bulletin. VEHICLE SPEED CONTROL; LATCHES/LOCKS/LINKAGES:DOORS:LATCH. Warranty Policy Bulletin: Toyota has received a number of reports regarding the outside door handles on certain 2008-2015 model year Sequoia vehicles and on certain 2007-2015 model year Tundra vehicles. In these reports, customers have indicated that one or more of the outside door handles exhibited an abnormal feeling, dragging, or sticking when used.
T-TT-0309-14 Rev2018-04-02. Service bulletin. ELECTRICAL SYSTEM. TT: Some customers may experience Bluetooth disconnections or loss of SMS text message functionality on the navigation/audio system with Android phones running OS 4.4 or later. Condition tends to occur to customers who have many previous text messages on their phones.
T-SB-0133-14 Rev2018-04-02. Service bulletin. EQUIPMENT. TSB: Revision Notice: The Parts information section, and the Required Tools & Equipment section has been updated. Toyota models equipped with the Premium HDD Navigation (AVN/AW-EMV) System require a Special Service Tool (SST) USB drive to update the map, points of interest, Gracenote®, and system software. The SST is used with all vehicles to deliver the update, however a unique Activation Number is required for each ehicle. Activation Numbers are provided in an Activation Card Number (ACN) pamphlet available through the normal parts ordering system. Use the process described in this bulletin to perform the update.
T-TT-0234-13 Rev2018-04-02. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). TT: Since MY 2011, several different update or upgrade USB SSTs have been issued for Toyota audio and navigation systems. Refer to the chart below for a comprehensive list of all current and previously issued USB SSTs and their applicability.
T-TT-0294-14 Rev2018-04-02. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. TT: Greenhouse Gas Logic (GHC) has been implemented on Toyota A/C Systems to reduce tailpipe emissions. The federal government issues café (Corporate Average Fuel Economy) credits to vehicle manufacturers that implement new technologies that reduce the carbon footprint of the vehicles they produce. GHC Logic technology works by automatically operating the HVAC system in REC mode when certain operating conditions are met, improving the A/C systems cooling efficiency and reducing the vehicle's C02 emissions.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.