Service bulletins for the 2012 Toyota Sequoia
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
322 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Electrical system are shown. Show all
| T-TT-0226-13 | 2018-04-23. Service bulletin. ELECTRICAL SYSTEM. The customer is having difficulty changing the multi-display screen from Day Mode. If the multi-display screen is set to Day Mode when the headlights are on, the setting we be memorized when the engine is turned off. |
|---|---|
| T-SB-0229-12_Rev | 2018-04-23. Service bulletin. ELECTRICAL SYSTEM. TSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Toyota vehicle becomes submerged in water, many components may be physically damaged. Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent malfunction. Although any flooding can be damaging, salt water flooding elevates the potential for abnormal conditions and may increase risks due to its highly corrosive and conductive nature. Salt residue also continues to corrode and remain conductive even after a vehicle dries. This bulletin is intended to assist with safe handling and inspection of flood damaged vehicles and to provide basic guidance on likely needed repairs. |
| T-SB-0012-13 Rev | 2018-04-02. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. TSB: OBSOLETE NOTICE: September 14, 2016: This bulletin is now obsolete. Please see T-SB-0134-16. |
| T-SB-0012-13 Rev | 2018-04-02. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. |
| T-TT-0246-13 Rev | 2018-04-02. Service bulletin. VISIBILITY; ELECTRICAL SYSTEM. Tech Tip: Tips for writing a DPR (Dealer Product Report) on manufacturing issues for windows and windshields. |
| T-TT-0086-11 | 2018-04-02. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; ENGINE. TechTip: Condition - The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted. |
| T-SB-0060-12 Rev | 2018-04-02. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM:SOFTWARE. An Initialization Process is required to activate the Entune? suite of Apps & Data Services on Premium HDD Navigation with Entune? and Display Navigation with Entune? head units before they are used for the first time on new vehicles. The Initialization Process may also need to be performed under other circumstances such as following a head unit replacement or after the customer?s personal settings are erased. The Initialization process requires between 3 and 15 minutes to complete, depending on the type of head unit, file size, cellular connection speed, and other factors. |
| T-TT-0268-13 | 2018-04-02. Service bulletin. EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or they have restored their phone data/settings recently. |
| T-TT-0058-10 | 2018-04-02. Service bulletin. ELECTRICAL SYSTEM. 4WD System is inoperative. Note: If the system does not complete the requested action or the actuator limit switches do not match the AWD ECU desired position, the 4WD light(s) will flash indicating a problem. Additionally if the system is unsure of its position, it may stop operating and not move out pf its current position. |
| T-SB-0101-11 Rev | 2017-08-14. Service bulletin. ELECTRICAL SYSTEM. TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components. |
| T-TT-307-14 Rev1 | 2017-08-14. Service bulletin. EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. TT: Customers complain of various Bluetooth connectivity concerns after upgrading to iOS 8.0 and later. Conditions typically experienced include inability to pair the iPhone to the system, poor sound quality during phone calls placed through the audio/navigation system, and the inability to place a hands free phone call using the audio/navigation system. |
| T-TT-0268-13 Rev | 2017-08-14. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; ELECTRICAL SYSTEM:SOFTWARE. TT: Some customers may encounter Bluetooth® connectivity concerns such as: * Difficulty to pair the phone. * Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. * Various Bluetooth® Audio functions are no longer functioning with customer's phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer's phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently. |
| TT-0307-14 Rev2 | 2017-08-14. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. TT: Some customers may encounter various Bluetooth connectivity concerns after upgrading to iOS 8.0 and later. Conditions typically experienced include inability to pair the iPhone to the system, poor sound quality during phone calls placed through the audio/navigation system, and the inability to place a hands free phone call using the audio/navigation system. |
| T-SB-0101-11 Rev | 2017-08-14. Service bulletin. EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM. TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components. |
| T-TT-0307-14 | 2017-08-01. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). Tech Tip: Customer complains of carious Bluetooth connectivity concerns after upgrading to iOS 8.0 and later. Conditions typically experienced include inability to pair the iPhone to the system, poor sound quality during phone calls placed through the audio/navigation system, and the inability to place a hands free phone call using the audio/navigation system. |
| T-SB-0047-16 | 2017-04-05. Service bulletin. ELECTRICAL SYSTEM; HYBRID PROPULSION SYSTEM: INVERTER. TSB: THE BREATHER PLUG SHOULD BE REPLACED DURING ANY DIFFERENTIAL/TRANSFER CASE REPAIRS TO PREVENT POSSIBLE REPEAT FAILURES. THE SUBSEQUENT USE OF THE ORIGINAL BREATHER PLUG AFTER A REPAIR HAS BEEN FOUND TO CONTRIBUTE TO THE FAILURE OF THE DIFFERENTIAL/TRANSFER CASE COMPONENTS. REPLACE THE BREATHER PLUG WHEN REPLACING DIFFERENTIAL/TRANSFER CASE COMPONENTS. |
| T-TT-0362-15 | 2017-03-28. Service bulletin. ELECTRICAL SYSTEM; ENGINE. TT: THE VEHICLE MAY BE DIFFICULT TO START OR HAVE AN ABNORMALLY LOW OR ROUGH IDLE AFTER THE BATTERY HAS BEEN DISCONNECTED OR POWER TO THE ENGINE ECM HAS BEEN INTERRUPTED. |
| T-SB-0012-13 REV | 2017-03-21. Service bulletin. ENGINE; ELECTRICAL SYSTEM. "TSB: FLASH REPROGRAMMING ALLOWS THE ECU SOFTWARE TO BE UPDATED WITHOUT REPLACING THE ECU. FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD-FIX PROCEDURES DESCRIBED IN INDIVIDUAL SERVICE BULLETINS. THIS BULLETIN DETAILS THE TECHSTREAM ECU FLASH REPROGRAMMING PROCESS AND OUTLINES USE OF THE TECHNICAL INFORMATION SYSTEM (TIS) AND THE CALIBRATION UPDATE WIZARD (CUW). FLASH CALIBRATION UPDATES CAN ONLY BE APPLIED TO THE VEHICLE/ECU COMBINATION FOR WHICH THEY ARE INTENDED. ECUS HAVE INTERNAL SECURITY THAT WILL NOT ALLOW THEM TO BE PROGRAMMED WITH ANOTHER ECU’S INFORMATION." |
| T-TT-0385-16 | 2017-03-01. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. "TECH TIP: THIS TECH TIP IS BEING PROVIDED TO BRING ATTENTION TO THE NEW LOCATION OF THE ENTUNE/NAV/MAP UPDATE AND UPGRADE USB DIRECTORY. CLICK ON THE TIS TAB, DIAGNOSTICS TAB, TELEMATICS TAB, AND THE DOCUMENT IS NOW LOCATED UNDER THE REFERENCE DOCUMENTS SECTIONS. THIS CHANGE HAS OCCURRED TO HELP SPEED UP THE UPDATING PROCESS OF THIS DOCUMENT. " |
| T-TT-0058-10 | 2016-04-12. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.