WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Toyota Mirai

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

111 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
T-TT-0520-192019-02-19. Service bulletin. EQUIPMENT. TT: In certain cases of leaking air conditioning systems, the root cause of the leak is inadvertently overlooked, causing a repeat repair. To improve customer satisfaction and repair A/C system leaks in one dealer visit, Toyota has developed a set of guidelines for evaluating A/C system components.
T-TT-0519-192019-02-19. Service bulletin. FUEL SYSTEM, GASOLINE. TT: Some 2016-2020 model year Mirai vehicles might encounter fueling issues which may result in the loss of the 35 MPa O-ring.
T-TT-0470-17_Rev2019-02-19. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT. TT: All grades of 2018-2019 model year Mirai and Sienna and 2019 model year CH-R vehicles are not compatible with Entune? 3.0 Remote Connect app features. The Toyota Entune? 3.0 Remote Connect mobile app lets you lock and unlock doors, start the engine, find your vehicle in a parking lot, and monitor guest drivers.
T-SB-0003-18_Rev2018-12-17. Service bulletin. ELECTRICAL SYSTEM. TSB: REVISION NOTICE November 13, 2018 Rev1: ? Applicability has been updated to include 2019 model year Mirai vehicles. Any previous printed versions of this bulletin should be discarded. To minimize battery discharge during transportation and storage, the D/C cut fuse (30A) has been removed at the assembly plant and temporarily stored in the blank space of the relay block in the engine compartment. Reinstall the D/C cut fuse (30A) into its original location and clear all related Diagnostic Trouble Codes (DTCs) during PDS (Pre-Delivery Service).
T-SB-0136-182018-12-17. Service bulletin. STRUCTURE. TSB: Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: ? Careful inspection for paint chips/scratches and body dents/dings. ? Proper operation of electrical accessories (including interior light, clock, and radio reset). ? Interior cleanliness. ? Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker prior to delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 10 of ?Final Inspection and Cleaning.?) A new PDS Check Sheet has been developed for the 2019 model year Mirai. Some check points have been added, expanded, or clarified. Bulletins are available for items in bold type.
T-SB-0133-182018-12-17. Service bulletin. EQUIPMENT:ELECTRICAL. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0285-17. ? Applicability has been updated to include 2019 model year Camry and Camry Hybrid vehicles and 2018 ? 2019 model year Mirai and Sienna vehicles. ? The entire bulletin has been updated. Service Bulletin No. T-SB-0285-17 is obsolete and any printed versions should be discarded. Some 2018 model year Camry and Camry Hybrid vehicles equipped with Entune? 3.0 Audio Plus (version 1004 or earlier) or Entune? 3.0 Premium Audio (version 1000 or earlier) may exhibit one or more of the following conditions: ? Abnormal display operation in the destination screen after ?IG-ON? ? Abnormal turn-by-turn direction operation ? Inaccurate traffic information displays ? Abnormal navigation routing ? Abnormal destination and ETA operation while navigation is operating ? Abnormal rerouting operation ? Abnormal navigation operation after ?IG-OFF/ON? cycle ? Navigation will not avoid areas that have been set to avoid ? Intermittent rebooting ? Navigation will not set from Destination Assist Navigation will intermittently not boot up after ?IG-ON? ? Abnormal operation when selecting unplayable songs from the USB flash drive ? Abnormal screen appearance ? Abnormal music browsing when manually browsing music ? Apps take a long time to load ? Abnormal shuffle function when listening to iPhone ? Voice output for temperature is incorrect unit ? Rebooting when connecting an Apple® device with more than 501 podcasts ? Abnormal brightness of Entune? apps ? Voice recognition inoperative ? Delay after answering a phone call ? Incoming call continues to ring (unable to answer or decline)
T-TT-0414-16-Rev2018-12-03. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT. TT: Some customers may encounter Bluetooth® connectivity concerns such as: ? Difficulty to pair the phone. ? Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.
Safety Recall an2018-10-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT. Update on Technician Certification Requirements.
T-SB-0068-182018-08-20. Service bulletin. ELECTRICAL SYSTEM. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0235-17. ? Applicability has been updated to include 2019 model year Toyota vehicles. Service Bulletin No. T-SB-0235-17 is obsolete and any printed versions should be discarded. An initialization procedure is required to activate the Entune 3.0, App Suite Connect for Entune 3.0, Audio Entune 3.0 , Audio Plus, and Entune 3.0 Premium Audio head units before they are used for the first time on new vehicles. The initialization procedure may also be performed under other circumstances, such as following a head unit replacement or after the customer?s personal settings are erased. The initialization procedure requires between 3 and 15 minutes to complete, depending on file size, cellular connection speed, and other factors. A Wi-Fi connection is recommended for optimal functionality when downloading software via a smartphone. Download the latest Entune? 3.0 app onto the smartphone. Following the initialization procedure, individual Entune 3.0 apps may periodically update through an over-the-air update system. Updates are optional or mandatory. The update procedure will take approximately 1 minute for each app requiring an update. Follow the procedure in this bulletin to perform the initialization and app updates. Additionally, a Safety Connect static cling is available to increase customer awareness. This bulletin also includes the vehicle identification process for Safety Connect-equipped vehicles and the static cling installation procedure.
T-SB-0197-17_Rev2018-06-18. Service bulletin. ELECTRICAL SYSTEM. TSB: REVISION NOTICE May 22, 2018 Rev2: * The Before Delivery section has been updated. May 08, 2018 Rev1: * Applicability has been updated to include 2019 model year Toyota vehicles. Any previous printed versions of this bulletin should be discarded. Hybrid vehicles are equipped with two types of batteries: * Hybrid Vehicle (HV) battery - Auxiliary (12V) battery If the hybrid vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary. Perform the following maintenance service for the HV battery and auxiliary battery. NOTE - BEFORE disconnecting the auxiliary battery, confirm the shift lever is in the "P" position and apply the parking brake completely. The shift lever CANNOT be shifted from the "P" position with the auxiliary battery disconnected. * If the negative (-) terminal of the auxiliary battery is reconnected, even if the power button is in the Start mode, the hybrid system may NOT start. In this case, push the Power button and select the Start mode again to start the hybrid system (the Ready light is ON). If the hybrid system still does NOT start (the Ready light is OFF), refer to the Repair Manual.
T-SB-0197-17_Rev2018-06-18. Service bulletin. ELECTRICAL SYSTEM. TSB: REVISION NOTICE May 08, 2018 Rev1: * Applicability has been updated to include 2019 model year Toyota vehicles. Any previous printed versions of this bulletin should be discarded. Hybrid vehicles are equipped with two types of batteries: * Hybrid Vehicle (HV) battery - Auxiliary (12V) battery If the hybrid vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary. Perform the following maintenance service for the HV battery and auxiliary battery. NOTE - BEFORE disconnecting the auxiliary battery, confirm the shift lever is in the "P" position and apply the parking brake completely. The shift lever CANNOT be shifted from the "P" position with the auxiliary battery disconnected. * If the negative (-) terminal of the auxiliary battery is reconnected, even if the power button is in the Start mode, the hybrid system may NOT start. In this case, push the Power button and select the Start mode again to start the hybrid system (the Ready light is ON). If the hybrid system still does NOT start (the Ready light is OFF), refer to the Repair Manual.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.