Service bulletins for the 2019 Toyota Mirai
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
111 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Electrical system are shown. Show all
| T-SB-0068-18 | 2018-08-20. Service bulletin. ELECTRICAL SYSTEM. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0235-17. ? Applicability has been updated to include 2019 model year Toyota vehicles. Service Bulletin No. T-SB-0235-17 is obsolete and any printed versions should be discarded. An initialization procedure is required to activate the Entune 3.0, App Suite Connect for Entune 3.0, Audio Entune 3.0 , Audio Plus, and Entune 3.0 Premium Audio head units before they are used for the first time on new vehicles. The initialization procedure may also be performed under other circumstances, such as following a head unit replacement or after the customer?s personal settings are erased. The initialization procedure requires between 3 and 15 minutes to complete, depending on file size, cellular connection speed, and other factors. A Wi-Fi connection is recommended for optimal functionality when downloading software via a smartphone. Download the latest Entune? 3.0 app onto the smartphone. Following the initialization procedure, individual Entune 3.0 apps may periodically update through an over-the-air update system. Updates are optional or mandatory. The update procedure will take approximately 1 minute for each app requiring an update. Follow the procedure in this bulletin to perform the initialization and app updates. Additionally, a Safety Connect static cling is available to increase customer awareness. This bulletin also includes the vehicle identification process for Safety Connect-equipped vehicles and the static cling installation procedure. |
|---|---|
| T-SB-0197-17_Rev | 2018-06-18. Service bulletin. ELECTRICAL SYSTEM. TSB: REVISION NOTICE May 22, 2018 Rev2: * The Before Delivery section has been updated. May 08, 2018 Rev1: * Applicability has been updated to include 2019 model year Toyota vehicles. Any previous printed versions of this bulletin should be discarded. Hybrid vehicles are equipped with two types of batteries: * Hybrid Vehicle (HV) battery - Auxiliary (12V) battery If the hybrid vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary. Perform the following maintenance service for the HV battery and auxiliary battery. NOTE - BEFORE disconnecting the auxiliary battery, confirm the shift lever is in the "P" position and apply the parking brake completely. The shift lever CANNOT be shifted from the "P" position with the auxiliary battery disconnected. * If the negative (-) terminal of the auxiliary battery is reconnected, even if the power button is in the Start mode, the hybrid system may NOT start. In this case, push the Power button and select the Start mode again to start the hybrid system (the Ready light is ON). If the hybrid system still does NOT start (the Ready light is OFF), refer to the Repair Manual. |
| T-SB-0197-17_Rev | 2018-06-18. Service bulletin. ELECTRICAL SYSTEM. TSB: REVISION NOTICE May 08, 2018 Rev1: * Applicability has been updated to include 2019 model year Toyota vehicles. Any previous printed versions of this bulletin should be discarded. Hybrid vehicles are equipped with two types of batteries: * Hybrid Vehicle (HV) battery - Auxiliary (12V) battery If the hybrid vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary. Perform the following maintenance service for the HV battery and auxiliary battery. NOTE - BEFORE disconnecting the auxiliary battery, confirm the shift lever is in the "P" position and apply the parking brake completely. The shift lever CANNOT be shifted from the "P" position with the auxiliary battery disconnected. * If the negative (-) terminal of the auxiliary battery is reconnected, even if the power button is in the Start mode, the hybrid system may NOT start. In this case, push the Power button and select the Start mode again to start the hybrid system (the Ready light is ON). If the hybrid system still does NOT start (the Ready light is OFF), refer to the Repair Manual. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.