# Recalls that may apply to the 2023 Toyota CROWN

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

## United States (NHTSA), as of 2026-10-19

- [25V744000](/recalls/nhtsa/25V744000.md), 2025-10-30: BACK OVER PREVENTION:DISPLAY FUNCTION. Toyota Motor Engineering \& Manufacturing \(Toyota\) is recalling certain 2022\-2026 Toyota, Lexus, and Subaru Solterra vehicles equipped with a Panoramic View Monitor \(PVM\) system. Please see the recall report for a complete list of models. A software error may cause the rearview camera to freeze or display a blank screen when the vehicle is in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard \(FMVSS\) number 111, "Rear Visibility." Built 2022\-05\-30 to 2025\-04\-04.
- [25V595000](/recalls/nhtsa/25V595000.md), 2025-09-11: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Toyota Motor Engineering \& Manufacturing \(Toyota\) is recalling certain 2023\-2024 Toyota Venza, 2023\-2025 RAV4 Prime, RAV4, Highlander, GR Corolla, Crown, 2024\-2025 Lexus TX, LS, Toyota Tacoma, Grand Highlander, and 2025 Lexus RX, Toyota Crown Signia, Camry, RAV 4 Plug\-in Hybrid \(PHEV\), and 4 Runner vehicles. Due to an error in the instrument panel software at vehicle startup, the instrument panel may fail to display vehicle speed, brake system, and tire pressure warning lights. Built from 2024\-05\-30.
- [24V548000](/recalls/nhtsa/24V548000.md), 2024-07-23: EQUIPMENT:OTHER:LABELS. Gulf States Toyota, Inc. \(GST\) is recalling certain Toyota 2023 GR Supra, 2024 4 Runner, Corolla, Grand Highlander, Grand Highlander Hybrid, Land Cruiser Hybrid, Tacoma, Tacoma Hybrid, 2023\-2024 BZ4X, Corolla Cross Hybrid, GR Corolla, GR86, Highlander, Highlander Hybrid, Prius, Prius Prime, Sequoia Hybrid, Tundra, Tundra Hybrid, Venza Hybrid, 2023\-2025 Crown, and 2025 Camry Hybrid vehicles equipped with GST accessories.  The load carrying capacity modification label may display inaccurate added weight values.  As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
- [24V442000](/recalls/nhtsa/24V442000.md), 2024-06-14: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. Toyota Motor Engineering \& Manufacturing \(Toyota\) is recalling certain 2023 Toyota Crown vehicles equipped with rearview and/or frontview cameras.  Due to insufficient laser welding, the camera cases may separate, allowing water to leak into the cameras and short circuit.  The rearview and front view camera images may not appear on the displays or display a distorted image.

## Canada (Transport Canada), as of 2026-10-19

- [2025594](/recalls/tc/2025594.md), 2025-10-30: Visual System. Issue: Under certain conditions, a software problem could cause the rearview camera image to freeze or not to display. If this happens, the rearview image may not display when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing. Note: This recall only affects certain vehicles equipped with a panoramic view monitor system.  Safety Risk: A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.  Corrective Actions: The company will notify owners in writing and advise you to take your vehicle to a dealership to update the parking assist ECU software.
- [2025469](/recalls/tc/2025469.md), 2025-09-11: Visual System. Issue: On certain vehicles, a software problem could cause the combination meter in the instrument panel not to display when the vehicle is started. As a result, you may not be able to see certain information about the vehicle, including the speedometer, fuel gauge, warning lights and malfunction tell\-tales. Note: This recall only affects vehicles equipped with a 12.3\-inch display.  Safety Risk: Warnings, tell\-tales and gauges that don't display could increase the risk of a crash.  Corrective Actions: The company will notify owners by mail and advise you to take your vehicle to a dealership to update the combination meter software. Alternatively, certain eligible vehicles will be sent a wireless over\-the\-air software update, which you can install yourself. For certain vehicles, the dealer will also inspect and, if necessary, replace the combination meter.
- [2024340](/recalls/tc/2024340.md), 2024-06-14: Visual System. Issue: On certain vehicles, the front and/or rearview camera case\(s\) may not have been welded properly. Over time, water could leak into the camera\(s\) and cause a short circuit. If this happens, the front and/or rearview camera image may not display correctly or at all.  Safety Risk: A rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.  Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the front and/or rearview camera\(s\).

## Check a VIN

- [NHTSA recall lookup by VIN, United States](https://www.nhtsa.gov/recalls)
- [Transport Canada recall search, Canada](https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng)

Contains information licensed under the Open Government Licence – Canada.

JSON: [/v1/vehicles/2023_toyota_crown/recalls](/v1/vehicles/2023_toyota_crown/recalls)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%202023%20Toyota%20CROWN&page=https%3A%2F%2Fopen.wenmarpro.com%2Fmakes%2Ftoyota%2Fcrown%2F2023%2Frecalls&vehicle=2023%20Toyota%20CROWN)