Service bulletins for the 2013 Toyota Camry
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
559 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| T-SB-0119-15 | 2018-12-17. Service bulletin. EQUIPMENT. TSB: This bulletin includes basic procedures for performing a Rescue Charge on Ni-MH High Voltage (HV) Batteries. This bulletin should be used in conjunction with the Repair Manual while performing Rescue Charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) Charger. |
|---|---|
| TTT043217 Rev1 | 2018-12-17. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. TT: Some Customers may complain about a Hybrid Vehicle Battery cooling system warning message. This warning message may appear when the HV Battery cooling system loses efficiency due to debris on the filter and or some object obstructing the air inlet. |
| TTT043217 | 2018-12-17. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. TT: Some Customers may complain about a Hybrid Vehicle Battery cooling system warning message. This warning message may appear when the HV Battery cooling system loses efficiency due to debris on the filter and or some object obstructing the air inlet. |
| TSB018217 | 2018-12-17. Service bulletin. ELECTRICAL SYSTEM. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components. |
| T-SB-0294-17_Rev | 2018-12-17. Service bulletin. EQUIPMENT. TSB: REVISION NOTICE November 14, 2018 Rev1: ? The Required Tools & Equipment section has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0133-14. ? The Parts Information, Required Tools & Equipment, and On-Vehicle Navigation Update sections have been updated. Service Bulletin No. T-SB-0133-14 is obsolete and any printed versions should be discarded. Toyota models equipped with the Premium HDD Navigation (AVN/AW-EMV) system require a Special Service Tool (SST) USB drive to update the map, points of interest, Gracenote®, and system software. The SST is used with all vehicles to deliver the update; however, a unique activation number is required for each vehicle. Activation numbers are provided in an Activation Card Number pamphlet available through the normal parts ordering system. Use the process described in this bulletin to perform the update. |
| T-SB-0134-16 | 2018-12-03. Service bulletin. ELECTRICAL SYSTEM. TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. |
| T-TT-0414-16-Rev | 2018-12-03. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT. TT: Some customers may encounter Bluetooth® connectivity concerns such as: ? Difficulty to pair the phone. ? Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently. |
| T-SB-0134-16 | 2018-11-26. Service bulletin. ENGINE. TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. |
| T-SB-0312-17 | 2018-11-05. Service bulletin. POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0034-14. ? The Parts Information section has been updated. Service Bulletin No. T-SB-0034-14 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Some 2012 ? 2014 model year Camry vehicles with a U760 transmission may exhibit a brief shudder intermittently while driving under light loads between approximately 25 and 50 mph. The torque converter and Engine Control Module/ECM (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition occurring. Follow the Repair Procedure below to address this condition. |
| LSC-E03-Dealer P | 2018-11-05. Service bulletin. EQUIPMENT. Dealer Package: A watermark has been added to the Dealer Letter to indicate that E03 expired on October 31, 2017. |
| LSC-E03-Technica | 2018-11-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. TI: THIS LSC EXPIRES ON OCTOBER 31, 2017 Technical Instructions for Limited Service Campaign E03. U760 ATM ECM SOFTWARE UPDATE CERTAIN 2012 - 2014 MY CAMRY. |
| Safety Recall an | 2018-10-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT. Update on Technician Certification Requirements. |
| PG006-01-Obsolet | 2018-10-15. Service bulletin. EQUIPMENT:OTHER:LABELS; EQUIPMENT. Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17. |
| PG004-97-Obsolet | 2018-10-15. Service bulletin. EQUIPMENT; EQUIPMENT:OTHER:LABELS. Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17. |
| T-SB-0304-17_Rev | 2018-08-20. Service bulletin. EQUIPMENT. TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen. |
| T-SB-0057-18 | 2018-08-20. Service bulletin. EQUIPMENT. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0043-14. ? Applicability has been updated to include 2017 ? 2018 model year Toyota vehicles. Service Bulletin No. T-SB-0043-14 is obsolete and any printed versions should be discarded. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE New security provisions are required to obtain a reset passcode. It is critical to review the instructions for this new process BEFORE attempting to get a passcode in the new system. |
| ZG5_Toyota POL17 | 2018-07-16. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Warranty Policy Bulletin: Toyota has received reports of customer concerns in which the power moon roof, power sliding doors or power hatch are inoperative from the overhead console switches or require excessive pressure on the overhead console switches to operate. Due to parts availability this Warranty Enhancement Program will be launched in 2 phases as illustrated below: 1 Camry and Camry Hybrid Certain 2012 March, 2017 Repair, Available 2 Sienna Certain 2011-2013 June, 2017 Repair Available. |
| T-SB-0151-13_Obs | 2018-07-16. Service bulletin. UNKNOWN OR OTHER. TSB: OBSOLETE NOTICE May 29, 2018: This bulletin is now obsolete. Please see T-SB-0039-18. |
| T-TT-0442-17 | 2018-07-02. Service bulletin. EQUIPMENT; EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM. TT: Safety Connect is a vehicle option which requires a subscription fee for the system to be active. The first year of service is provided in the vehicle purchase price. Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service. |
| T-SB-0087-13 Rev | 2018-07-02. Service bulletin. ELECTRICAL SYSTEM. TSB: For vehicles that are used under certain severe operating conditions, the HV Battery Cooling Fan may exhibit an excessive buildup of dust, lint, or other debris that can reduce the efficiency of the HV Battery Cooling System. HV Battery Cooling Fan maintenance and cleaning should be performed to address this condition. |
| T-SB-0044-16 | 2018-07-02. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE. TSB: On some vehicles, when Rapgard? is removed, the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. |
| T-SB-0039-18 | 2018-06-18. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0151-13. * Applicability has been updated to include 2016 - 2018 model year Avalon and Avalon HV and 2017 model year Camry and Camry HV vehicles. Service Bulletin No. T-SB-0151-13 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Some 2012 - 2017 model year Camry, Camry HV, and 2013 - 2018 Avalon and Avalon HV vehicles produced in North American may exhibit a knocking, popping, ticking, or snapping noise from the moonroof area while driving. Follow the Repair Procedure in this bulletin to address this condition. |
| T-TT-0442-17_Rev | 2018-06-18. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. TT: Safety Connect is a vehicle option which requires a subscription fee for the system to be active. The trail period of service is provided upon the vehicle purchase. Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service. If registration of the replacement DCM part is attempted using the Techstream utility after the account has become inactive, the registration will fail, and messages such as "ATX webserver is Down" or "ATX error" will be displayed. |
| T-SB-0087-13 Rev | 2018-06-11. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; EQUIPMENT ADAPTIVE/MOBILITY. TSB: For vehicles that are used under certain severe operating conditions, the HV Battery Cooling Fan may exhibit an excessive buildup of dust, lint, or other debris that can reduce the efficiency of the HV Battery Cooling System. HV Battery Cooling Fan maintenance and cleaning should be performed to address this condition. |
| T-SB-0044-16 | 2018-06-11. Service bulletin. STRUCTURE:BODY. TSB: On some vehicles, when Rapgard? is removed, the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.