WenmarOpen by Wenmar Pro

Service bulletins for the 2020 Toyota C-HR

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

111 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Equipment and accessories are shown. Show all

Bulletins, newest first
T-TT-0606-202020-05-11. Service bulletin. EQUIPMENT. TT: Due to the challenges caused by the COVID-19 virus threat, some dealers are experiencing reduced traffic into their stores and causing dealer stock to age. Due to this situation, dealers are reminded and recommended to follow the Long-Term Vehicle Storage Guidelines outlined in T-SB-0009-19 and other Service Bulletin publications to ensure customers receive their vehicles in a fresh and well maintained condition Please ensure that both Sales and Service at your dealership are aware of these guidelines and are following the recommended maintenance and storage processes and procedures to ensure the highest customer satisfaction with their new vehicle purchase.
T-SB-0032-202020-05-11. Service bulletin. EQUIPMENT. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
Toyota Safety Re2020-04-20. Service bulletin. EQUIPMENT. Safety Recall and Service Campaign - Technician Certification Requirements
Toyota Safety Re2020-04-20. Service bulletin. EQUIPMENT. Safety Recall and Service Campaign - Technician Certification Requirements
T-SB-0009-19_Rev2020-04-13. Service bulletin. EQUIPMENT; SERVICE BRAKES; ELECTRICAL SYSTEM. TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.
T-SB-0022-202020-04-13. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. TSB: Some 2016 ? 2020 model year Toyota vehicles may exhibit naturally occurring odors emitted from the HVAC system and/or related environmental factors. Follow the General Procedure in this bulletin to minimize the odors experienced.
T-SB-0008-19_Rev2020-04-13. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. TSB: An initialization procedure is required to activate the Entune? 3.0 App Suite Connect for Audio, Audio Plus, and Premium Audio head units before they are used for the first time on new vehicles. The initialization procedure may also be performed under other circumstances, such as following a head unit replacement or after the customer?s personal settings are erased. The initialization procedure requires between 3 and 15 minutes to complete, depending on file size, cellular connection speed, and other factors. Following the initialization procedure, individual Entune? 3.0 apps may periodically update through an over-the-air update system. Updates are optional or mandatory. The update procedure will take approximately 1 minute for each app requiring an update. Follow the Initialization/Update Procedure in this bulletin to perform the initialization and app updates.
T-TT-0588-19_Rev2020-03-30. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. TT: Some 2020 model year vehicles may display abnormal Safety Connect operation during PDS or after replacement due to DCM activation issues. If there are no DTCs present and after the initial SOS light flashing sequence after ignition on, neither the red nor green light stays on in the overhead console determine if the vehicle is in shipping mode. To determine if a vehicle is experiencing this condition, connect a Techstream and navigate to: Telematics-Data List - ?Telematics Activation Status?. If this value is displayed as ?Shipping?, continue to the Shipping Mode recommendations below, and do not create a TAS case.
T-TT-0588-19_Rev2020-03-30. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. TT: Some 2020 model year vehicles may display abnormal Safety Connect operation during PDS or after replacement due to DCM activation issues. If there are no DTCs present and after the initial SOS light flashing sequence after ignition on, neither the red nor green light stays on in the overhead console determine if the vehicle is in shipping mode. To determine if a vehicle is experiencing this condition, connect a Techstream and navigate to: Telematics-Data List - ?Telematics Activation Status?. If this value is displayed as "Shipping", continue to the Shipping Mode recommendations below, and do not create a TAS case.
T-TT-0594-20_Rev2020-03-30. Service bulletin. EQUIPMENT:ELECTRICAL. TT: Some vehicles equipped with Dynamic Navigation may experience a pop-up message notifying them that their map update service will end soon. The date that is shown could be more than one year in the future. This does not indicate any issues with the vehicle, and is only informing the user of the expiration date.
Safety Recall an2020-03-30. Service bulletin. EQUIPMENT. Safety Recall and Service Campaign - Technician Certification Requirements
T-SB-0008-19_Rev2020-03-30. Service bulletin. EQUIPMENT. An initialization procedure is required to activate the Entune? 3.0 App Suite Connect for Audio, Audio Plus, and Premium Audio head units before they are used for the first time on new vehicles. The initialization procedure may also be performed under other circumstances, such as following a head unit replacement or after the customer?s personal settings are erased. The initialization procedure requires between 3 and 15 minutes to complete, depending on file size, cellular connection speed, and other factors. Connection to a wireless network is recommended for optimal functionality when downloading software via a smartphone. Download the latest Entune? 3.0 smartphone app on a smartphone. Following the initialization procedure, individual Entune? 3.0 apps may periodically update through an over-the-air update system. Updates are optional or mandatory. The update procedure will take approximately 1 minute for each app requiring an update. Follow the Initialization/Update Procedure in this bulletin to perform the initialization and app updates
T-TT-0594-202020-02-24. Service bulletin. EQUIPMENT. TT: Some vehicles equipped with Dynamic Navigation may experience a pop-up message notifying them that their map update service will end soon. The date that is shown could be more than one year in the future. This does not indicate any issues with the vehicle, and is only informing the user of the expiration date.
T-TT-0588-192020-02-24. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. TT: Some 2020 model year vehicles may display abnormal Safety Connect operation during PDS due to DCM activation issues. This condition is characterized by no DTCs present and after the initial SOS light flashing sequence after ignition on, neither the red nor green light stays on in the overhead console. To determine if a vehicle is experiencing this condition, connect a Techstream and navigate to: Telematics-Data List - ?Telematics Activation Status?. If this value is displayed as ?Shipping?, continue to the recommendations below, and do not create a TAS case.
T-SB-0009-19_Rev2020-02-18. Service bulletin. EQUIPMENT. TSB: REVISION NOTICE January 22, 2020 Rev1: ? The Battery subsection has been updated. Any previous printed versions of this bulletin should be discarded. Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.
T-SB-0008-202020-02-18. Service bulletin. EQUIPMENT. TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address the condition. NOTE This bulletin applies to ALL powertrain fluids excluding fuel and coolant.
T-SB-0007-19_Rev2020-02-18. Service bulletin. EQUIPMENT. TSB: REVISION NOTICE January 24, 2020 Rev1: ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should check battery SOC and recharge, if necessary, no more than 48 hours before to customer delivery.
T-TT-0588-192020-01-27. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM. TT: Some 2020 model year vehicles may display abnormal Safety Connect operation during PDS due to DCM activation issues. This condition is characterized by no DTCs present and after the initial SOS light flashing sequence after ignition on, neither the red nor green light stays on in the overhead console. To determine if a vehicle is experiencing this condition, connect a Techstream and navigate to: Telematics-Data List - ?Telematics Activation Status?. If this value is displayed as ?Shipping?, continue to the recommendations below, and do not create a TAS case.
T-TT-0553-192019-09-03. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. TT: The new DCA-8000 Diagnostic Charger may cause your facility?s Ground Fault Circuit Interrupter (GFCI) breaker to trip. A GFCI breaker can be tripped for various reasons, one of the reasons may be related to the DCA-8000. We are investigating this issue to determine the root cause. Other reasons the GFCI breaker may trip ? Circuit demand is too high for GFCI rating ? Worn out GFCI internal contacts ? Improper installation or wiring of GFCI breaker
T-SB-0158-18-Rev2019-09-03. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. TSB: REVISION NOTICE July 03, 2019 Rev1: ? Applicability has been updated to include 2020 model year Supra vehicles. ? The Hook and Loop Style section has been added. Any previous printed versions of this bulletin should be discarded. 2020 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle?s glove box for customer reference. CAUTION ? ALWAYS verify the floor mat is designed specifically for the model and model year it is being installed in. ? ONLY use floor mats that can be secured using the retainers. ALL OEM Toyota floor mats are specifically designed to fit correctly and be secured using the retainers. ? Make sure the floor mat is properly placed on the vehicle carpet and secured with the retainers. If the driver side floor mat is NOT properly placed and secured, it could slip and interfere with the movement of the pedals during driving and may cause an accident. ? Verify the operation of the accelerator, brake, and clutch (if equipped) pedals and clearance to the mat. ? NEVER install more than one floor mat at a time in the driver?s seating position. ? If applicable, ANY secondary set of floor mats (based upon customer preference, such as the all-weather floor mats or other floor mats) MUST be placed in the trunk with ALL the packaging material intact. Do NOT install the secondary mat on top of the primary floor mat already installed in the driver?s seating position.
T-TT-0552-192019-07-15. Service bulletin. EQUIPMENT; ENGINE. TT: When repairing a 1234YF HVAC system on a gas powered (Non-Hybrid) Toyota and the addition of compressor oil is required to complete the repairs, the various 1234YF compressor oils (ND-12, PS-D1, or VC100YF) are available through the Toyota Approved Dealer Equipment website.
T-SB-0073-192019-07-15. Service bulletin. STRUCTURE; EQUIPMENT. TSB: TMNA Accessory Sales and Marketing has developed a Toyota paint protection film (PPF) decal (treated with a specially developed light adhesive) for 2019 ? 2020 model year Toyota vehicles. The decal comes in two sizes (2.8 in. x 8 in. and 4 in. x 8 in.) for small and large hoods and will be applied to the top of PPF for all series at TLS accessory installation facilities. The decal is intended to stay affixed to the film until delivery detail/wash. Just before customer delivery, follow the procedure in this Service Bulletin to remove the decal and any residue left by the adhesive.
T-TT-0468-17-Rev2019-03-25. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. TT: HVAC drain tube is found to be blocked/clogged.
TSB-0009-192019-02-19. Service bulletin. EQUIPMENT. TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.
T-SB-0008-192019-02-19. Service bulletin. EQUIPMENT. TSB: An initialization procedure is required to activate the Entune? 3.0 App Suite Connect for Entune? 3.0 Audio, Entune? 3.0 Audio Plus, and Entune? 3.0 Premium Audio head units before they are used for the first time on new vehicles. The initialization procedure may also be performed under other circumstances, such as following a head unit replacement or after the customer?s personal settings are erased. The initialization procedure requires between 3 and 15 minutes to complete, depending on file size, cellular connection speed, and other factors. Connection to a wireless network is recommended for optimal functionality when downloading software via a smartphone. Download the latest Entune? 3.0 app onto the smartphone. Following the initialization procedure, individual Entune? 3.0 apps may periodically update through an over-the-air update system. Updates are optional or mandatory. The update procedure will take approximately 1 minute for each app requiring an update. Follow the procedure in this bulletin to perform the initialization and app updates. Additionally, a Safety Connect static cling is available to increase customer awareness. This bulletin also includes the vehicle identification process for Safety Connect-equipped vehicles and the static cling installation procedure.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.