Service bulletins for the 2013 Toyota 4Runner
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
345 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| Safety Recall an | 2018-10-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT. Update on Technician Certification Requirements. |
|---|---|
| PG006-01-Obsolet | 2018-10-15. Service bulletin. EQUIPMENT:OTHER:LABELS; EQUIPMENT. Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17. |
| PG004-97-Obsolet | 2018-10-15. Service bulletin. EQUIPMENT; EQUIPMENT:OTHER:LABELS. Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17. |
| T-SB-0304-17_Rev | 2018-08-20. Service bulletin. EQUIPMENT. TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen. |
| T-SB-0057-18 | 2018-08-20. Service bulletin. EQUIPMENT. TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0043-14. ? Applicability has been updated to include 2017 ? 2018 model year Toyota vehicles. Service Bulletin No. T-SB-0043-14 is obsolete and any printed versions should be discarded. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE New security provisions are required to obtain a reset passcode. It is critical to review the instructions for this new process BEFORE attempting to get a passcode in the new system. |
| T-SB-0026-15_Rev | 2018-07-16. Service bulletin. POWER TRAIN. TSB: REVISION NOTICE June 8, 2018 Rev2: ? Applicability has been updated to exclude 2016 ? 2017 model year Tacoma vehicles. ? The Repair Procedure section has been updated. May 15, 2017 Rev1: ? Applicability has been updated to include 2016 ? 2017 model year Tacoma and 4Runner vehicles. ? The Introduction section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2004 ? 2017 model year 4Runner vehicles, 2007 ? 2014 model year FJ Cruiser vehicles, and 2005 ? 2015 model year Tacoma vehicles equipped with part-time 4WD may exhibit a cyclical groaning or grinding noise coming from the front differential in 2WD that goes away when operated in 4WD. This noise can be addressed by replacing the needle bearing on the left side of the front differential. Refer to the Repair Procedure for needle bearing roller replacement instructions. |
| T-TT-0442-17 | 2018-07-02. Service bulletin. EQUIPMENT; EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM. TT: Safety Connect is a vehicle option which requires a subscription fee for the system to be active. The first year of service is provided in the vehicle purchase price. Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service. |
| T-SB-0047-16 | 2018-07-02. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. TSB: The breather plug should be replaced during any differential/transfer case repairs to prevent possible repeat failures. The subsequent use of the original breather plug after a repair has been found to contribute to the failure of the differential/transfer case components. Replace the breather plug when replacing differential/transfer case components. |
| T-SB-0044-16 | 2018-07-02. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE. TSB: On some vehicles, when Rapgard? is removed, the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. |
| T-TT-0442-17_Rev | 2018-06-18. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. TT: Safety Connect is a vehicle option which requires a subscription fee for the system to be active. The trail period of service is provided upon the vehicle purchase. Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service. If registration of the replacement DCM part is attempted using the Techstream utility after the account has become inactive, the registration will fail, and messages such as "ATX webserver is Down" or "ATX error" will be displayed. |
| T-SB-0047-16 | 2018-06-11. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. TSB: The breather plug should be replaced during any differential/transfer case repairs to prevent possible repeat failures. The subsequent use of the original breather plug after a repair has been found to contribute to the failure of the differential/transfer case components. Replace the breather plug when replacing differential/transfer case components. |
| T-SB-0044-16 | 2018-06-11. Service bulletin. STRUCTURE:BODY. TSB: On some vehicles, when Rapgard? is removed, the paint may have a stained appearance. These stains appear to be under the clear coat (repainting this area is not necessary). The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. |
| T-TT-0392-16 Rev | 2018-06-11. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. TT: Some customers may experience Bluetooth connection issues after updating the Android Operating System to 5.x.x (Lollipop) or later. |
| T-TT-0234-13 Rev | 2018-04-23. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). TT: Since MY 2011, several different update or upgrade USB SSTs have been issued for Toyota audio and navigation systems. Refer to the chart below for a comprehensive list of all current and previously issued USB SSTs and their applicability. |
| T-TT-0294-14 Rev | 2018-04-23. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER; FUEL SYSTEM, GASOLINE. TT: Greenhouse Gas Logic (GHC) has been implemented on Toyota A/C Systems to reduce tailpipe emissions. The federal government issues café (Corporate Average Fuel Economy) credits to vehicle manufacturers that implement new technologies that reduce the carbon footprint of the vehicles they produce. GHC Logic technology works by automatically operating the HVAC system in REC mode when certain operating conditions are met, improving the A/C systems cooling efficiency and reducing the vehicle's C02 emissions. |
| T-TT-0234-13 Rev | 2018-04-23. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. TT: Since MY 2011, several different update or upgrade USB SSTs have been issued for Toyota audio and navigation systems. Refer to the chart below for a comprehensive list of all current and previously issued USB SSTs and their applicability. |
| T-TT-0293-14 Rev | 2018-04-23. Service bulletin. ELECTRICAL SYSTEM. TT: Safety Connect is a vehicle option which requires a subscription fee for the system to be active. The first year of service is provided in the vehicle purchase price. Once the subscription has lapsed the DCM will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service. |
| T-TT-0355-15 | 2018-04-23. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. TechTip: Condition: Customers may experience connectivity issues when the following conditions are met: The customer?s iPhone is operating on iOS9 firmware The customer?s iPhone is connected to the vehicle via Bluetooth. If the vehicle is equipped with a Fujitsu-Ten brand head unit, the customer may complain of one or more of the following: When playing media via Bluetooth audio and pressing the ?Pause? button on the phone, media playback pauses for one second before resuming playback. Yelp searches return an error when search criteria includes a special character, e.g. !,$,#. If the vehicle is equipped with a Pioneer brand head unit, the customer may complain of one or more of the following: The customer?s iPhone does not support the album image feature. When playing media via Bluetooth audio, one or more of a number of play/pause issues occur. |
| T-SB-0163-13 Rev | 2018-04-23. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. TSB: Use the following procedures to check and/or update the software version of Entune/Navigation for Non-HDD Type units. |
| T-SB-0061-15 | 2018-04-23. Service bulletin. EQUIPMENT:ELECTRICAL. TSB: Some 2012 model year vehicles equipped with a Display Audio Navigation System and Entune? (version less than 2.1.0) may exhibit one or more of the following conditions: ? Vehicle orientation slow to update after vehicle startup ? Five Bing? search results are not all displayed on the map ? Voice recognition destination request does not provide feedback ? Voice recognition for POI search displays ?Function not available? message ? ?Car Multimedia? device name cannot be changed |
| T-TT-0392-16 | 2018-04-23. Service bulletin. EQUIPMENT:ELECTRICAL. TT: Some customers may experience Bluetooth connection issues after updating the Android Operating System to 5.x.x (Lollipop) or later. |
| T-TT-0391-16 | 2018-04-23. Service bulletin. EQUIPMENT. TT: When replacing the Hard Disk Drive (HDD) or Navigation Unit (Navi Unit) follow the instructions below. |
| T-TT-0374-15 | 2018-04-23. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. TT: Since MY 2011, several different update or upgrade USB SSTs have been issued for Toyota audio and navigation systems. Refer to the chart below for a comprehensive list of all current and previously issued USB SSTs and their applicability. |
| TTT-0268-13 Rev3 | 2018-04-23. Service bulletin. ELECTRICAL SYSTEM. TT: Some customers may encounter Bluetooth connectivity concerns such as: ? Difficulty pairing the phone. ? Intermittent Bluetooth failure to connect when first turning on the vehicle. ? Various Bluetooth Audio functions are no longer functioning with the customer?s phone, such as the ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently. |
| T-TT-0385-16 | 2018-04-23. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Tech Tip: This Tech Tip is being provided to bring attention to the new location of the Entune/NAV/Map Update and Upgrade USB Directory. Click on the TIS tab, Diagnostics tab, Telematics tab, and the document is now located under the reference documents sections. This change has occurred to help speed up the updating process of this document. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.