WenmarOpen by Wenmar Pro

Service bulletins for the 2012 Subaru Outback

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

325 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
06-79-202020-09-04. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin announces availability of new master cylinder application shaft seals.
03-82-18R2020-09-04. Service bulletin. ENGINE AND ENGINE COOLING. This service information bulletin announces a design change to the clutch release bearing used on the models listed.
TKA19-TKB19-TKC12019-05-28. Service bulletin. AIR BAGS; ENGINE AND ENGINE COOLING. SUBARU OF AMERICA, INC. has determined that a defect, which relates to motor vehicle safety, exists in certain Subaru vehicles listed above, equipped with a non-desiccated Takata-sourced passenger side frontal airbag containing the propellant Phase Stabilized Ammonium Nitrate (PSAN).
07-133-182019-02-19. Service bulletin. ENGINE. This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may illuminate and a knock sensor-related DTC set in the ECM memory: P0327, P0328, P0332 and P0333. The knock sensor for DIT engines is now utilized for NA engines to improve durability and resistance to heat.
02-160-152018-06-18. Service bulletin. ENGINE AND ENGINE COOLING. This Service Information bulletin provides revised procedures for inspection and measurement of the cylinder block assembly to determine whether or not replacement is necessary. Read through and understand this information completely before proceeding with any repairs to the cylinder block. All Models with FA and FB Engines, 2011MY and Later.
16-90-13R2018-06-11. Service bulletin. POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE); ENGINE; EQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER; POWER TRAIN. CVT Transmissions only. This bulletin announces the availability of a countermeasure torque converter assembly to address a customer concern of very low engine RPM when coming to a stop. The condition is similar to coming to a stop in a manual transmission equipped vehicle without depressing the clutch pedal. Thrust washer wear inside the torque converter can cause restriction of the oil passage used to bleed off lock-up clutch application pressure. The result is either a delayed (momentary low engine rpm) or no lock-up pressure release. The thrust washer has been changed from a solid bushing-type to a needle bearing type.
02-172-18R2018-06-11. Service bulletin. ENGINE; EQUIPMENT. This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. The new o-ring utilizes material which has an increased resistance to engine heat.
16-90-13R2018-06-11. Service bulletin. ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER; POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE). CVT Transmissions only. This bulletin announces the availability of a countermeasure torque converter assembly to address a customer concern of very low engine RPM when coming to a stop. The condition is similar to coming to a stop in a manual transmission equipped vehicle without depressing the clutch pedal. Thrust washer wear inside the torque converter can cause restriction of the oil passage used to bleed off lock-up clutch application pressure. The result is either a delayed (momentary low engine rpm) or no lock-up pressure release. The thrust washer has been changed from a solid bushing-type to a needle bearing type.
02-172-18R2018-06-11. Service bulletin. ENGINE. This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. The new o-ring utilizes material which has an increased resistance to engine heat.
16-101-162018-06-04. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin announces a production process change to the starter ring gear portion of the torque converter assembly. To address customer concerns of a squeaking-type sound heard while cranking the engine, a change to improve anti-wear characteristics of the ring gear was made.
02-164-162017-08-14. Service bulletin. ENGINE AND ENGINE COOLING. This Service Information bulletin announces a design change to the internal contact portion of the oil pressure switch to increase durability
11-126-122017-03-07. Service bulletin. ENGINE. DTC P0456 REPROGRAMMING FILE AVAILABILITY
11-111-12R2017-03-06. Service bulletin. ENGINE AND ENGINE COOLING. P0128 COOLANT THERMOSTAT (ENGINE COOLANT TEMPERATURE BELOW THERMOSTAT REGULATING TEMPERATURE)
02-162-152017-02-27. Service bulletin. ENGINE. "THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH COULD AFFECT OPERATION OR CAUSE IMPROPER ILLUMINATION OF THE OIL PRESSURE WARNING LAMP. A SMALL PILOT PORTION WAS ADDED TO THE THREADED AREA ON P.N. 25240KA051 AS SHOWN IN THE ILLUSTRATION BELOW."
16-95-152017-02-22. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. "THIS BULLETIN PROVIDES A DIAGNOSTIC PROCEDURE FOR CONFIRMATION OF A SUSPECTED CVT CHAIN SLIP CONDITION. EXAMPLES OF CUSTOMER CONCERNS MAY BE: ABNORMAL TRANSMISSION OPERATING SOUNDS, A SHUDDER OR VIBRATION SENSATION, LACK OF POWER, HESITATION, ENGINE RPM RISE WITHOUT INCREASE IN VEHICLE SPEED OR IN ISOLATED CASES, A CHECK ENGINE LAMP ILLUMINATION (WITH ENGINE MISFIRE DTCS STORED IN THE ECM MEMORY)."
02-155-142016-11-21. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS. THIS BULLETIN ANNOUNCES AVAILABILITY OF A REVISED REPLACEMENT AIR INTAKE DUCT FOR THE TURBOCHARGED VEHICLES SPECIFIED.
WQF422016-05-23. Service bulletin. ENGINE. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
2-22-132016-05-23. Service bulletin. ENGINE. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
WQF-422016-05-23. Service bulletin. ENGINE. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
11-126-122016-05-13. Service bulletin. ENGINE. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
16-80-11R2016-05-13. Service bulletin. ENGINE. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
11-111-12R2016-05-13. Service bulletin. ENGINE. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
WQC-392012-12-04. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ENGINE. SUBARU: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. SOFTWARE CHANGE WILL NOT AFFECT FUEL ECONOMY OR PERFORMANCE, EVEN THOUGH A CORRECTION, FOR ENGINE CONTROL MODULE, HAS BEEN DEVELOPED FOR THE DEFICIENCY IN OBDII SYSTEM THERMOSTAT MONITORING LOGIC. MODELS 2011-2012 LEGACY, OUTBACK, IMPREZA SEDAN, WAGON, FORESTER, TRIBECA AND 2013 BRZ. *PE UPDATED 1/31/13. *PE

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.