# Service bulletins for the 2027 Ram 5500

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

10 bulletins from NHTSA, as of 2026-10-19.

- [9100926](/bulletins/11038319.md), 2026-10-07, Service bulletin: ELECTRICAL SYSTEM. WIRELESS CHARGER Welcome GREEN LED not turning ON after multiple IGN ON/OFF without sleep cycle and no phone on the charging pads. Part numbers affected: 68630089AA 68630088AB 68649038AA Welcome Green LED turns on for 1 second after multiple IGN ON/OFF without sleep cycle and no phone on the charging pad. Intent of this condition is to notify the customer/dealership that the Wireless Charging Pad is ready to charge. Do not report as warranty claim, no impact to wireless charger functionality. Part numbers affected: 68630089AB 68630088AD 68649038AB Advice to dealership: Do no replace wireless charger PNs 68630089AA,68630088AB,68649038AA if no Welcome GREEN LED is seen after multiple IGN ON/OFF without sleep cycle and no phone on the charging pads. This feature is available in the successor NIKs, no impact to wireless charger functionality.
- [07\-006\-26 REV. A](/bulletins/11037272.md), 2026-09-10, Service bulletin: ENGINE. Engine Overheat Customers may comment on the following: SYMPTOM: ● Vehicle overheating. ● Temperature gauge is reading hot. ● Overheat symbol is illuminated in Instrument Panel Cluster \(IPC\). This bulletin involves inspecting the thermostat housing part number and, if necessary, replacing the thermostat.
- [S2623000052 REV. A](/bulletins/11037262.md), 2026-09-10, Service bulletin: AIR BAGS; ELECTRICAL SYSTEM. Airbag Warning Light On or Intermittent. The Occupant Restraint Controller \(ORC\) May Have The Following DTCs \(Active/Stored\)
- [07\-006\-26](/bulletins/11036360.md), 2026-08-26, Service bulletin: ENGINE. Engine Overheat Customers may comment on the following: ● Vehicle overheating. ● Temperature gauge is reading hot. ● Overheat symbol is illuminated in Instrument Panel Cluster \(IPC\). This bulletin involves inspecting the thermostat housing part number and, if necessary, replacing the thermostat.
- [9100833 REV1](/bulletins/11035064.md), 2026-07-18, Service bulletin: FUEL/PROPULSION SYSTEM. Fuel Delivery Module Before replacing the fuel module for DTCs P0461 and P062A and other not start, long crank, fuel gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way.
- [S2608000030](/bulletins/11034924.md), 2026-07-08, Service bulletin: BACK OVER PREVENTION: WARNINGS. Park Assist Unavailable Message Displayed in The Cluster
- [08\-255\-26](/bulletins/11034895.md), 2026-07-08, Service bulletin: ELECTRICAL SYSTEM. Navigation Won't Load On Home/Split Screen Customers may experience the following: SYMPTOM: ● Factory navigation won't load on the Home/Split screen Fig. 1.
- [S2508000025 REV.A](/bulletins/11034390.md), 2026-07-02, Service bulletin: ELECTRICAL SYSTEM. Instrument Panel Cluster \(IPC\) and Radio Compass Display has Dashes \(\-\-\)
- [S2208000045 REV.D](/bulletins/11034385.md), 2026-07-02, Service bulletin: STRUCTURE:BODY. Backup Camera Poor Image Quality Inspection
- [9100833](/bulletins/11034342.md), 2026-07-02, Service bulletin: FUEL/PROPULSION SYSTEM. Fuel Delivery Module Before replacing the fuel module for DTCs P0461 and P062A and other not start, long crank, fuel gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way.

JSON: [/v1/vehicles/2027_ram_5500/bulletins](/v1/vehicles/2027_ram_5500/bulletins)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%202027%20Ram%205500&page=https%3A%2F%2Fopen.wenmarpro.com%2Fmakes%2Fram%2F5500%2F2027%2Fbulletins&vehicle=2027%20Ram%205500)