P0335 on the 2019 Ram 1500
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
Nobody has written a description of this code yet.
| 1807620 | 2022-10-17. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following Diagnostic Trouble Codes (DTCs) has been set:P0339 - Crankshaft Position Sensor Intermittent. P0335 - Crankshaft Position Sensor Circuit. P258B - Electronic Vacuum Pump Performance. P0456 - EVAP System Small Leak. If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system.The customer may comment on one or more of the following:ECO light does not illuminate in the instrument cluster during Multiple Displacement Solenoid (MDS) event. 2-3 km (1.4 to 1.9 mph) difference between cruise set speed and the actual vehicle speed. ?Ready Not Ready? appearing message in the Electronic Vehicle InformationCenter (EVIC) while driving and before an Engine Stop Start (ESS) event. The engine may exhibit a crank and fail to start situation. Vehicle has a rough idle only after cold start. The radiator cooling fan is stuck on for a long time while driving. Coolant temp/check gauges light illuminated in the Instrument Panel Cluster(IPC). In addition, the following software enhancements are also available:Radiator cooling fan operation strategy. Updated electric vacuum pump calibration to reduce pump wear. Small leak detection in-use monitor performance ratio. |
|---|---|
| 1807420REVA | 2022-10-17. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following Diagnostic Trouble Codes (DTCs) have been set:P0339 - Crankshaft Position Sensor Intermittent. P0335 - Crankshaft Position Sensor Circuit. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT)to determine if a leak is present in the system. P258B - Electronic Vacuum Pump Performance. The customer may experience one or more of the following:ECO light does not illuminate in the instrument cluster during MultipleDisplacement Solenoid (MDS) event. 2-3 km (1.4 to 1.9 mph) difference between cruise set speed and the actualvehicle speed. The engine may exhibit a crank and fail to start situation. The vehicle has a rough idle only after cold start. The radiator cooling fan is stuck on for a long time while driving. Coolant temp/check gauges light illuminated in the Instrument Panel Cluster(IPC). Radiator cooling fan inoperative. |
| 18-076-20 REV. A | 2020-12-28. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following Diagnostic Trouble Codes (DTCs) has been set:P0339 - Crankshaft Position Sensor Intermittent. P0335 - Crankshaft Position Sensor Circuit. P258B - Electronic Vacuum Pump Performance. P0456 - EVAP System Small Leak. If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system.The customer may comment on one or more of the following:ECO light does not illuminate in the instrument cluster during Multiple Displacement Solenoid (MDS) event. 2-3 km (1.4 to 1.9 mph) difference between cruise set speed and the actual vehicle speed. ?Ready Not Ready? appearing message in the Electronic Vehicle InformationCenter (EVIC) while driving and before an Engine Stop Start (ESS) event. The engine may exhibit a crank and fail to start situation. Vehicle has a rough idle only after cold start. The radiator cooling fan is stuck on for a long time while driving. Coolant temp/check gauges light illuminated in the Instrument Panel Cluster(IPC). In addition, the following software enhancements are also available:Radiator cooling fan operation strategy. Updated electric vacuum pump calibration to reduce pump wear. Small leak detection in-use monitor performance ratio. |
| 18-076-20 REV. A | 2020-12-21. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following Diagnostic Trouble Codes (DTCs) has been set:P0339 - Crankshaft Position Sensor Intermittent. P0335 - Crankshaft Position Sensor Circuit. P258B - Electronic Vacuum Pump Performance. P0456 - EVAP System Small Leak. If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system.The customer may comment on one or more of the following:ECO light does not illuminate in the instrument cluster during Multiple Displacement Solenoid (MDS) event. 2-3 km (1.4 to 1.9 mph) difference between cruise set speed and the actual vehicle speed. ?Ready Not Ready? appearing message in the Electronic Vehicle InformationCenter (EVIC) while driving and before an Engine Stop Start (ESS) event. The engine may exhibit a crank and fail to start situation. Vehicle has a rough idle only after cold start. The radiator cooling fan is stuck on for a long time while driving. Coolant temp/check gauges light illuminated in the Instrument Panel Cluster(IPC). In addition, the following software enhancements are also available:Radiator cooling fan operation strategy. Updated electric vacuum pump calibration to reduce pump wear. Small leak detection in-use monitor performance ratio. |
| 18-074-20 REV. A | 2020-11-30. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following Diagnostic Trouble Codes (DTCs) have been set:P0339 - Crankshaft Position Sensor Intermittent. P0335 - Crankshaft Position Sensor Circuit. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT)to determine if a leak is present in the system. P258B - Electronic Vacuum Pump Performance. The customer may experience one or more of the following:ECO light does not illuminate in the instrument cluster during MultipleDisplacement Solenoid (MDS) event. 2-3 km (1.4 to 1.9 mph) difference between cruise set speed and the actualvehicle speed. The engine may exhibit a crank and fail to start situation. The vehicle has a rough idle only after cold start. The radiator cooling fan is stuck on for a long time while driving. Coolant temp/check gauges light illuminated in the Instrument Panel Cluster(IPC). Radiator cooling fan inoperative. |
| 18-076-20 | 2020-10-26. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs has been set:P0339 - Crankshaft Position Sensor Intermittent. P0335 - Crankshaft Position Sensor Circuit. P258B - Electronic Vacuum Pump Performance. P0456 - EVAP System Small Leak. If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system.The customer may comment on one or more of the following:?Ready Not Ready? appearing message in the Electronic Vehicle Information Center (EVIC) while driving and before an Engine Stop Start (ESS) event. The engine may exhibit a crank and fail to start situation. Vehicle has a rough idle only after cold start. The radiator cooling fan is stuck on for a long time while driving. Coolant temp/check gauges light illuminated in the Instrument Panel Cluster (IPC). In addition, the following software enhancements are also available:Radiator cooling fan operation strategy. Updated electric vacuum pump calibration to reduce pump wear. Small leak detection in-use monitor performance ratio. |
| 18-074-20 | 2020-10-26. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set:P0339 - Crankshaft Position Sensor Intermittent. P0335 - Crankshaft Position Sensor Circuit. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. P258B - Electronic Vacuum Pump Performance. The customer may experience one or more of the following:The engine may exhibit a crank and fail to start situation. The vehicle has a rough idle only after cold start. The radiator cooling fan is stuck on for a long time while driving. Coolant temp/check gauges light illuminated in the Instrument Panel Cluster (IPC). Radiator cooling fan inoperative. |
| 68079375A | 2018-11-26. Service bulletin. Crankshaft Position Sensor Before replacing this part due to a P0335 fault code, please contact Andrew Acton at cell (248) 421-4130. Engineering is interested in the condition(s) present when the fault occurs.~ If no response is received within 15 minutes, then continue with repair.~ If possible, please send Freeze Frame data and Mark Sync Event data to andrew.acton@fcagroup.com~ To Retrieve Marks Data on WiTech:~ 1) Choose ?Monitors? and select ?OBDII Monitors? from the drop down box.~ 2) At the next Screen, choose ?Cam Crank Synchronization Monitor?.~ 3) Once you select the Cam Crank Synchronization event Monitor, you will get to the three pages of Marks Event Data. |
8 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.