WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Nissan Titan

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

249 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
NTB17-0632017-10-15. Service bulletin. ENGINE. 2016-2017 TITAN XD; MIL ON WITH DTC P0604 AND/OR P2299 This bulletin applies only to vehicles equipped with a Cummins 5.0L V8 Diesel engine. IF YOU CONFIRM The MIL is ON with one or both of the following DTCs stored: - P0604 (ECM [Internal Control Module Random Access Memory (RAM) Error]) - P2299 (ACCEL PEDAL POS BRAKE SWITCH) And There are no drivability issues. ACTION 1. Save Computer Data with CONSULT-III plus (C-III plus). 2. At step 6 of the reprogramming procedure (page 7), confirm this bulletin applies to the vehicle you are working on. 3. If this bulletin applies, continue with reprogramming. 4. Write Saved Data with C-III plus.
NTB16-068c2017-08-25. Service bulletin. ENGINE. 2016-2017 TITAN XD; TRANSMISSION SHIFT QUALITY ISSUES This bulletin applies only to vehicles equipped with a Cummins 5.0L V8 Diesel engine. IF YOU CONFIRM Any of the following issues: - When cold (transmission fluid below 140°F [60°C]), there is an engine RPM rise (200 to 500 RPM flare) during the 1-2 shift, 2-3 shift, and/or the 3-4 shift. - While slowing to a stop, a 2-1 down shift bump is felt just before stopping. - Harsh up-shifts. - Shift shock when lifting your foot from the accelerator. - Gear hunting while driving in city traffic. ACTION 1. Compare the vehicle?s current TCM part number to the part number listed in Table A on page 7. - If the current TCM part number matches a part number listed in Table A, follow the instructions in Table A. 2. Save computer data with CONSULT-III plus (C-III plus). 3. Compare the vehicle?s current ECM part number to the part number listed in Table B on page 30. - If the current ECM part number matches a part number listed in Table B, reprogram the ECM. - Write saved data. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
NTB17-008a2017-08-01. Service bulletin. ENGINE AND ENGINE COOLING. NISSAN; OIL LEAKING AROUND VALVE TIMING CONTROL SOLENOID VALVE This bulletin applies to vehicles equipped with 6-cylinder engines. For Titan and Titan XD, this bulletin applies only vehicles equipped with gasoline engines. This bulletin has been amended in the PARTS INFORMATION and CLAIMS INFORMATION sections. Discard previous versions of this bulletin.
NTB17-0312017-08-01. Service bulletin. ENGINE AND ENGINE COOLING. 2016 - 2017 TITAN XD; COOLANT HEATER (ENGINE BLOCK HEATER) INSTALLATION This bulletin applies only to vehicles equipped with Cummins 5.0L Diesel engine. SERVICE INFORMATION Some customers may want to use a coolant heater (engine block heater) for their vehicle when ambient temperatures are below 32°F (0°C). 2016 Titan XD: - Some were not equipped from the factory with a coolant heater or cord. - Some were equipped with coolant heater, but not a cord. 2017 Titan XD: Was equipped from the factory with a coolant heater, but some were not equipped with the coolant heater cord. If a customer chooses to purchase the parts and labor for installation of a coolant heater and/or coolant heater cord, use the Service Procedure in this bulletin for installation instructions.
NTB16-056a2017-08-01. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; EQUIPMENT:APPLIANCE:AIR CONDITIONER. 2016-2017 TITAN XD; EXHAUST SMELL INSIDE VEHICLE WHEN HVAC IS ON FRESH AIR This bulletin has been amended to update Applied Vehicles, add step 11 to the Service Procedure and add a flowchart. No other changes have been made. Please discard previous versions of this bulletin.
PC522 Titan and2017-08-01. Service bulletin. ENGINE; EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM:SOFTWARE. ECM Reprogram Dealer Inventory *****Dealer Announcement***** Nissan is conducting a dealer inventory service action to update Electronic Control Module (ECM) software on 7,719 specific 2017 Titan and 4,759 Armada vehicles identified in Service Comm. On the affected vehicles, the ECM software is being updated to refine the MIL illumination logic for the exhaust gas temperature sensor. Affected vehicles are not subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. Nissan requests dealers to complete this software update prior to sale to ensure customer satisfaction. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1. Verify if vehicles currently in new dealer inventory are affected by this service action using Service Comm I.D. PC522 for Titan or P6334 for Armada. - New vehicles in dealer inventory can also be identified using DCS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to install the updated software. 3. The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm and release the vehicle. ***** Dealer Responsibility ***** It is the dealer?s responsibility to check Service Comm using the appropriate campaign I.D for the inspection status on each affected vehicle currently in new vehicle inventory. Nissan requests dealers to perform this repair on new vehicles in inventory prior to being retailed to ensure customer satisfaction.
NTB17-0082017-08-01. Service bulletin. EQUIPMENT:MECHANICAL; ENGINE. NISSAN; OIL LEAKING AROUND VALVE TIMING CONTROL SOLENOID VALVE This bulletin applies only to Maxima, Quest, Altima Coupe, Altima, Pathfinder and Murano vehicles equipped with V6 engine OR Titan/Titan XD equipped with VK56 engine IF YOU CONFIRM Engine oil is leaking from a valve timing control solenoid valve, And The valve timing control solenoid valve operates correctly and is not externally damaged. ACTION Replace the valve timing control solenoid valve O-ring with a new one using the Service Procedure starting on page 2.
NTB17-0012017-08-01. Service bulletin. ENGINE AND ENGINE COOLING. 2016-2017 TITAN XD; CORRECT PARKING ANGLE OF VEHICLE WHEN USING ENGINE BLOCK HEATER SERVICE INFORMATION When using the engine block heater (if equipped) on an Applied Vehicle (engine block heater is plugged in): - Vehicle should be parked on a level surfaces. Or - If a level surface is not available, the vehicle should be parked with the front of the truck lower than the rear (nose down). CAUTION: Use of the engine block heater when parked with the front of the vehicle higher than the rear (5 degrees or more) may cause the engine block heater to become damaged and/or inoperative.
NTB16-1242017-08-01. Service bulletin. ENGINE. 2017 ARMADA AND TITAN/TITAN XD; MIL IS ON WITH DTC P2080 AND/OR P2082 IF YOU CONFIRM: The MIL is ON with DTC - P2080 (EXHAUST GAS TEMP SENSOR 1 B1), And/or - P2082 (EXHAUST GAS TEMP SENSOR 1 B2). ACTION: 1. Refer to step 6 in the SERVICE PROCEDURE to confirm this bulletin applies to the vehicle you are working on. 2. If this bulletin applies, reprogram the ECM. NOTE: If this bulletin does apply (the ECM needs to be reprogrammed), do NOT replace the exhaust gas temp sensor.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.