WenmarOpen by Wenmar Pro

P17F0 on the 2018 Nissan Sentra

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

This code is specific to a manufacturer and is not described here. Its meaning is in the manufacturer's service information.

Bulletins for this model year that name P17F0
NTB20-0372020-06-10. Service bulletin. 2018-2019 SENTRA, VERSA SEDAN, AND VERSA NOTE; ENHANCED DIAGNOSTIC LOGIC FOR CVT IF YOU CONFIRM The customer reports a transmission judder (shake, shudder, single or multiple bumps or vibration), hesitation on acceleration, lack of power, or RPM flare. NOTE: • A new diagnostic logic has been established to enhance the diagnostic process by storing a diagnostic trouble code (DTC) on Applied Vehicles. • New DTCs: P17F0, P17F1, P17F2, P17F3, P17F4 will not turn the MIL ON. • New DTC P0868 will turn the MIL ON. • This new diagnostic logic will monitor conditions in the CVT while the customer is operating their vehicle in their usual daily drive patterns. • If any of the above DTCs are stored, refer to NTB20-035 (Sentra) or NTB20-036 (Versa Sedan and Versa Note) for repair information. ACTION 1. Confirm the current TCM part number. 2. Reprogram the TCM, if applicable
NTB18-0772019-01-07. Service bulletin. MIL ON WITH DTC P0776, P1715 AND MAY HAVE HESITATION AND/OR LACK OF POWER This bulletin applies only to vehicles equipped with a CVT (Continuously Variable Transmission). IF YOU CONFIRM The MIL is ON with DTC P0776 (PC SOLENOID B ? Pressure Control Solenoid ?B? Performance/Stuck OFF) stored. NOTE: - If P0744, P0746, P0841, P0965, P2813, or P17F0 are stored this bulletin does not apply. Refer to ASIST for diagnostic assistance. - With this incident, if it should occur, P1715 (INPUT SPEED SENSOR) may be stored with DTC P0776. The vehicle may also hesitate and/or have reduced power. ACTION 1. Refer to the Repair Flow Chart on page 2 for mechanical CVT repair. 2. If needed, reprogram the TCM. - Refer to step 30 in the TCM Reprogram section (page 21) of the SERVICE PROCEDURE to confirm if reprogramming is needed. 3. Perform Additional Service (page 19).

2 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.