WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Nissan Sentra

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

183 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
NTB13-077c2017-09-14. Service bulletin. POWER TRAIN. CVT FLUID LEVEL CHECK SERVICE INFORMATION This bulletin applies only to vehicles equipped with a Continuously Variable Transmission (CVT). This bulletin has been amended. The APPLIED VEHICLES section has been revised. No other changes have been made. Please discard all previous versions of this bulletin.
NTB12-055f2017-08-25. Service bulletin. POWER TRAIN:AXLE ASSEMBLY. CLICKING NOISE FROM FRONT OR REAR AXLE DURING TAKE-OFF/ACCELERATION This bulletin has been amended. The APPLIED VEHICLES section has been revised. No other changes have been made. Please discard previous versions of this bulletin.
NTB17-034a2017-08-25. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. 2017 SENTRA; CVT JUDDER AND/OR P0746/P0965 STORED This bulletin applies only to vehicles equipped with a Continuously Variable Transmission (CVT). This bulletin has been amended to make minor changes on pages 22, 27, 34, 43, 63, 91, and 103. Please discard previous versions of this bulletin.
NTB17-0342017-08-01. Service bulletin. POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. 2017 SENTRA; CVT JUDDER AND/OR P0746/P0965 STORED IF YOU CONFIRM The customer reports a transmission judder (shake, shudder, single or multiple bumps or vibration), hesitation on acceleration, lack of power or RPM flare. AND/OR One of these DTCs is stored. - P0746 (PRES CNT SOL/A FCTN (L/PRESS SOL/FNCTN)) - P0965 (PRESSURE CONTROL SOLENOID B) ACTION - Refer to the Repair Overview on page 2. CAUTION: Always handle the CVT and component assemblies carefully.
NTB16-035a2017-08-01. Service bulletin. ENGINE; ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. 2011-2017 JUKE AND 2017 SENTRA; TURBOCHARGER SERVICE This bulletin applies only to vehicles equipped with MR16DDT engine. This bulletin has been amended. The Title and APPLIED VEHICLES section have been revised, and a PARTS INFORMATION section has been added. No other changes have been made. Please discard previous versions of this bulletin.
PM666 - 2017 Sen2017-08-01. Service bulletin. VEHICLE SPEED CONTROL:ACCELERATOR PEDAL. Accelerator Pedal Inspection ***** Detailed Information ***** On January 31, 2017, Nissan announced a Quality Assurance Hold certain MY2017 Sentra (B17) vehicles. These vehicles are either currently in dealer inventory or assigned and in transit to the dealer. An inspection procedure is now available. Nissan is requesting that dealers inspect the accelerator pedal part lot number on all affected inventory and, if necessary, remedy affected inventory using the procedure included with this announcement. The quality hold can be released once the vehicle inspection and, if necessary, repair has been completed. ***** What Dealers Should Do ***** 1. Verify if vehicles currently in dealer inventory are affected by this inventory service action using Service Comm I.D. PM666. - New vehicles in dealer inventory can be also be identified using DCS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information 2. Use the attached procedure to inspect the part lot number, and if matched, replace the subject part. - If part replacement is not needed, dealers may submit the inspection claim, and release the vehicle for sale with no further action. - If part replacement is needed, dealers will need to order parts using an SVC order in DCS. - Once the vehicle has been repaired, submit the claim, using the claims coding provided in the repair procedure, and release the vehicle. Do not submit the claim until parts have been received and the vehicle has been remedied. - Parts replaced under this campaign activity may be collected. Follow the attached inspection procedure prior to determining the necessity of replacing any parts. NOTE: Dealers should continue to check new arriving inventory for applicability. 3. Dealers are requested to inspect and, if necessary, remedy any affected vehicle in dealer new or pre-owned inventory prior to sale to ensure customer satisfaction.
PM666 - 2017 Sen2017-08-01. Service bulletin. VEHICLE SPEED CONTROL:ACCELERATOR PEDAL. Accelerator Pedal Quality Assurance Hold Nissan is committed to a high level of customer service and satisfaction. This commitment requires Nissan to periodically place certain specific vehicles on a temporary Quality Assurance (QA) Hold to assure that these vehicles, as delivered to our customers, meet our exacting standards and our customers? expectations. Effective immediately, Nissan is placing a temporary Quality Assurance (QA) Hold on approximately 4,066 specific MY2017 Sentra (B17) vehicles. Nissan has learned that specific accelerator pedals may not be manufactured to specification and is investigating this concern. ***** What Dealers Should Do ***** 1. Verify if vehicles currently in dealer inventory are affected by this QA Hold using Service Comm I.D. PM666 Note: Dealers should continue to check new arriving inventory for QA Hold applicability. 2. Please do not drive, sell, or trade the specific 2017 Sentra vehicles in Dealer Inventory subject to this QA Hold. 3. No further action is necessary at this time. Nissan will provide an update by February 3, 2017.
NTB16-1232017-08-01. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. PLASTIC INTERIOR TRIM PROTECTIVE COVERING REMOVAL SERVICE INFORMATION Vehicles are delivered with plastic interior trim protective covering on the front and rear seats, front and rear door panel finishers, steering wheel, and sun visors (see examples on page 2). When removing the protective covering, care must be used to avoid scuffs, scrapes, cuts, and other abrasive contact to interior trim components. DO NOT use sharp objects like razor blades, box cutters, knives, etc. when removing the plastic interior trim protective covering. IMPORTANT All soft trim described in this bulletin is on automatic return to NNA. Any trim found damaged in the way described in this bulletin will be charged back to the dealer.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.