WenmarOpen by Wenmar Pro

Service bulletins for the 2018 Nissan Rogue

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

254 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
NTB18-031a2018-06-18. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); ELECTRICAL SYSTEM:SOFTWARE. 2016-2018 NISSAN CONNECT NAVIGATION SYSTEM SOFTWARE UPDATE TO RESOLVE SEVERAL ISSUES This bulletin applies only to vehicles equipped with navigation system. This bulletin has been amended to correct Bosch contact information on page 2. No other changes have been made. Please discard previous versions of this bulletin.
NTB18-0312018-06-18. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. 2016-2018 NISSAN CONNECT NAVIGATION SYSTEM SOFTWARE UPDATE TO RESOLVE SEVERAL ISSUES This bulletin applies only to vehicles equipped with navigation system. IF YOU CONFIRM One or more of the following is occurring: - The navigation unit intermittently reboots: - At random or while listening to SXM or on a Bluetooth hands-free phone call. - Loud booming noise from speakers while on a Bluetooth hands-free call. - Navigation unit screen illumination does not change at night as designed. - AM/FM signal strength issues. - A status message ?Voice Recognition is initializing, please wait? is displayed when pressing the voice recognition button 2-3 minutes after the ignition is first turned ON. NOTE: If the message is displayed within the first 2-3 minutes this is normal. The voice recognition is loading phonebook contacts into its system. AND - The Software version has been confirmed as ?needs update? (refer to page 4). ACTION - Perform the SERVICE PROCEDURE starting on page 3 and reprogram the Navigation system with USB memory stick shown below.
NTB18-0332018-06-04. Service bulletin. ENGINE AND ENGINE COOLING. 2014 - 2018 ROGUE; ACCELERATOR PEDAL VIBRATION IF YOU CONFIRM A vibration from the accelerator pedal between 1600 - 2000 RPM. ACTION Install the new brake booster vacuum tube and hose listed in the PARTS INFORMATION section of this bulletin.
NTB18-009a2018-05-21. Service bulletin. EQUIPMENT; WHEELS; SUSPENSION. 2017 ? 2018 ROGUE SPORT; FRONT WHEEL ALIGNMENT TOTAL TOE SPECIFICATION This bulletin has been superseded to NTB16-115. Discard previous versions of this bulletin.
NTB03-074m2018-05-21. Service bulletin. EQUIPMENT; EXTERIOR LIGHTING:FOG LIGHTS. FOG LAMP AND/OR HEADLAMP FOGGING This bulletin has been amended to add Fog Lamps and modify one step in the flow chart on page 3. No other changes have been made. Please discard previous versions of this bulletin.
NTB16-115a2018-05-21. Service bulletin. WHEELS; EQUIPMENT; SUSPENSION. REVISED WHEEL ALIGNMENT SPECIFICATIONS This bulletin has been amended. The APPLIED VEHICLES were updated with new models and model years. No other changes have been made. Discard all previous versions of this bulletin.
NTB16-018c2018-05-21. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; ENGINE AND ENGINE COOLING. MIL ON WITH P0603 STORED FOR ECM BACK UP CIRCUIT This bulletin does NOT apply to Titan equipped with Cummins V8 Diesel engine. This bulletin has been amended to add a NOTE in the Applied Vehicles. No other changes have been made. Please discard previous versions of this bulletin.
NTB18-0192018-04-23. Service bulletin. EQUIPMENT; ENGINE. 2013-2018 ALTIMA AND 2014-2018 ROGUE; ENGINE SUPPORT TOOLS SERVICE INFORMATION A new Engine Support Tool and Engine Support Bracket are now available to allow the CVT to be removed from the Applied Vehicles without having to remove the engine. The procedures in this bulletin are different than those that are currently in the Electronic Service Manual (ESM), which will be updated with this information at a later date. Please refer to the vehicle specific service procedure to use these new tools: Altima Page 2 Rogue AWD Page 11 Rogue FWD Page 24
NTB18-017a2018-04-23. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. NISSAN; SERVICE INFORMATION FOR DTCS B2EF0 AND B130C This bulletin applies only to vehicles equipped with Telematics. This bulletin has been amended. APPLIED VEHICLES was updated and a DTC listed in the SERVICE INFORMATION was corrected. No other changes have been made. Discard all previous versions of this bulletin.
NTB13-107b2018-04-23. Service bulletin. ENGINE. INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended to update the Applied Vehicles. No other changes were made. Please discard previous versions of this bulletin.
NTB11-044c2018-04-23. Service bulletin. WHEELS. WHEEL BALANCING SERVICE INFORMATION This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin.
PC601 2016-182018-04-16. Service bulletin. EQUIPMENT. Left Hand Engine Mounting Insulator Voluntary Service Campaign UPDATE March 2, 2018 Please discard earlier versions of this bulletin The announcement from January 18, 2018 has been revised to include: - Retailed vehicles affected by this campaign are now include in this announcement - Campaign repair bulletin, NTB18-002 has been revised to include the location of a repair video, which is now available in Virtual Academy under the Tech Training Garage Videos tab. See video #554: ?2016-17 Rogue Left Hand Engine Mount Insulator Campaign?. - Nissan has developed a parts shipment plan for use on retailed units. Parts (2 per dealer) will begin to arrive at dealerships on Monday, March 5, 2018. o Dealers may order parts via normal ordering process beginning March 12, 2018, if additional parts are needed.
NTB18-0232018-04-16. Service bulletin. EQUIPMENT:ELECTRICAL. NISSAN; MICROPHONE DOES NOT WORK This bulletin applies only to vehicles equipped with Telematics. IF YOU CONFIRM The microphone of an applied vehicle does not work. - The person receiving your call through Bluetooth® cannot hear you. And Voice Recognition does not respond to any commands. NOTE: DTCs U1A01 and/or U1A02 may be found stored. ACTION 1. Confirm TCU reprogramming will resolve the issue. - Refer to ?Issue Confirmation? on page 2. 2. If confirmed, reprogram the TCU.
NTB17-083a2018-04-02. Service bulletin. STRUCTURE:BODY:HATCHBACK/LIFTGATE. MOTION ACTIVATED LIFTGATE STICKER This bulletin applies to vehicles equipped with a Motion Activated Liftgate. This bulletin has been amended to add 2018 Murano, update model years in the Applied Vehicles, and change the part number in the Parts Information. Please discard previous version of this bulletin.
NPSB17-0832018-03-26. Service bulletin. EQUIPMENT:ELECTRICAL. Service Department Wi-Fi Requirement - Password Protected Beginning with the 2018 MY Rogue, the NissanConnect service has the ability to update its system's firmware through a Wi-Fi connection. A Wi-Fi connection can be made to the vehicle for updating NAVI map data and system software, or using online services, such as Online Search or Premium Traffic. Workshop Wi-Fi network must be configured as WPA2 password-protected to allow connection with the 2018 MY Rogue and future equipped models. For connecting to these vehicles, please confirm with your dealer network administrator to ensure your Wi-Fi is arranged as password-protected. If you need to add password-protected, please update the login credentials on any other workshop equipment connected to the Wi-Fi network. As an example, listed below is instructions on connecting to the Wi-Fi network through the 2018 MY Rogue screen display. For additional information on this new Wi-Fi connectivity feature, refer to the vehicle NissanConnect Owner's Manual.
PC612 20182018-03-26. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. A-IVI Software Reprogram ***** Quality Action Summary ***** Nissan is conducting a quality action on new vehicle inventory to reprogram the Alliance-In Vehicle Infotainment (A-IVI) software on specific MY2018 Rogue (T32) vehicles identified in SERVICE COMM or DBS National Service History ? Open Campaigns. These vehicles are either currently in dealer inventory or assigned and in transit to the dealer. The software update will correct a potential issue with the NissanConnect system displaying a blank screen after the vehicle is turned on. ***** What Dealers Should Do ***** 1. Verify if vehicles currently in dealer inventory are affected by using Service Comm or DBS National Service History ? Open Campaign I.D. PC612. - New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to reprogram the affected vehicles. - This procedure requires no tools and does not require a technician to perform - The vehicle must be in range of the service departments Wi-Fi network in order to download the software update - The person performing the update must know the service department?s password to the secure WPA2 Wi-Fi network - Refer to NPSB17-083 regarding service department Wi-Fi network requirements 3. Dealers are requested to remedy any affected vehicle in dealer new inventory to help ensure customer satisfaction. 4. The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm and release the vehicle.
NTB18-0172018-03-26. Service bulletin. POWER TRAIN; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. NISSAN; SERVICE INFORMATION FOR DTCS B2EF0 AND B130C This bulletin applies only to vehicles equipped with Telematics. SERVICE INFORMATION Diagnostic information in the Electronic Service Manuals (ESM) for the following DTCs may be missing or incorrect: -B2EF0 ? INTERNAL BATTERY (CIRC VOLT BELOW THRESHOLD) -B130C ? TCU (Telematics Control Unit) PAIRING ERROR If one of these DTCs is stored, follow the steps listed below along with the Electronic Service Manual (ESM) to compete the required repairs. DTC B2FE0 ? INTERNAL BATTERY (CIRC VOLT BELOW THRESHOLD): 1. Start the engine and let it idle for 30 minutes (to allow charging of the TCU internal battery). -2018 LEAF only: Put the vehicle in Ready to Drive mode (depress the brake pedal and depress the power [?ignition?] switch) for 30 minutes. 2. Verify the DTC can be erased. 3. If the DTC will not erase, replace the TCU. DTC B130C: 1. Collect all keys, and then re-register them to the vehicle. 2. Verify the DTC can be erased. 3. If the DTC will not erase, replace the TCU. NOTE: The related Electronic Service Manuals (ESM) will be updated at a later date. CLAIMS INFORMATION Refer to the current Nissan Warranty Flat Rate Manual and submit a claim for the repairs performed.
NTB18-0092018-03-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; SUSPENSION. 2017 ? 2018 ROGUE SPORT; FRONT WHEEL ALIGNMENT TOTAL TOE SPECIFICATION SERVICE INFORMATION Hunter brand alignment machines may have incorrect alignment specifications for ?total toe-in? on 2017-2018 Rogue Sport. - The correct specifications can be found in the Electronic Service Manual (ESM) SUSPENSION > FRONT SUSPENSION (see page 2). - Revised data is currently available for installation from Hunter. - Until the updated data is installed in your Hunter machine, please use the correct specifications on page 2, or in the Electronic Service Manual (ESM).
NTB18-0082018-03-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. ADAS SYSTEM DTC C1A03, C1A04, AND/OR C1B01 SERVICE INFORMATION This bulletin applies only to vehicles equipped with Automatic Emergency Braking (AEB) or Forward Emergency Braking (FEB). SERVICE INFORMATION If the following ICC/ADAS codes are stored, make sure to follow the diagnostic procedures in the Electronic Service Manual (ESM) before replacing any parts. C1A03 ? VEHICLE SPEED SENSOR -The diagnostic procedure in the ESM includes check and, if needed, repair for ABS DTCs before replacing ADAS components. -If repairs are performed for the ABS system; when compete, perform DTC Confirmation Procedure again before doing any additional repairs. C1A04 ? ABS/TCS/VDC SYSTEM -The diagnostic procedure in the ESM includes check and, if needed, repair for ABS DTCs before replacing ADAS components. -If repairs are performed for the ABS system; when compete, perform DTC Confirmation Procedure again before doing any additional repairs. C1B01 CAM AIMING INCMP -The diagnostic procedure in the ESM includes check and, if needed, repair for LANE CAMERA DTCs before replacing ADAS components. -LANE CAMERA DTC may require adjustment of the lane camera. -If repairs/adjustments are performed for the Lane Camera; when compete, perform DTC Confirmation Procedure again before doing any additional repairs.
NTB15-049o2018-03-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. TELEMATICS SERVICE INFORMATION This bulletin applies only to vehicles equipped with a Telematics Communication Unit (TCU). This bulletin has been amended. Changes have been made throughout. It is necessary to read the revised procedure(s) in entirety to properly perform the action(s). Please discard previous versions of this bulletin.
PC601 2016-182018-02-21. Service bulletin. ENGINE. Left Hand Engine Mounting Insulator Voluntary Service Campaign ***** Campaign Summary***** Nissan is conducting a Voluntary Service Campaign to inspect and, if necessary, replace the left hand (LH) engine-mounting insulator. On some of the affected vehicles, the LH engine-mounting insulator may have been manufactured out of specification, and could break. To help prevent this from occurring, Nissan will inspect the LH engine-mounting insulator and replace it if needed at no cost to the customer for parts and labor. ***** What Dealers Should Do ***** 1. Verify if vehicles are affected by this Voluntary Service Campaign or DBS National Service History ? Open Campaign I.D. PC601. 2. Dealers are requested to repair any affected vehicles in dealer new or pre-owned inventory to ensure customer satisfaction. - New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information 3. Dealers should use NTB18-002 to inspect and, if necessary, remedy any vehicles subject to this campaign. 4. Once repaired, dealers should submit the claim, using the claims coding provided, and release the vehicle.
NTB15-049n2018-02-12. Service bulletin. EQUIPMENT. TELEMATICS SERVICE INFORMATION This bulletin applies to vehicles equipped with a TCU (Telematics Communication Unit). This bulletin has been amended. A correction was made to the Service Procedure on page 23. No other changes were made. Please discard previous versions of this bulletin.
NTB17-1192018-01-29. Service bulletin. EQUIPMENT. 2018 ROGUE; INTELLIGENT KEY REGISTRATION TIPS This bulletin applies to vehicles equipped with Intelligent Key only. SERVICE INFORMATION When replacing or adding an Intelligent Key of an Applied Vehicle: 1. ALWAYS initialize/register the original Intelligent Key(s) BEFORE attempting to initialize/register a new one. 2. Confirm the Intelligent Key is correct for the vehicle being worked on. - The last five digits of the Intelligent Key?s part number is printed on the back behind the mechanical key. If a ?new? Intelligent Key will not initialize/register, go to page 2 to determine if the ?new? Intelligent Key has been previously initialized/registered to another vehicle. NOTE: Once a new Intelligent Key has been initialized/registered to a vehicle, it can be reinitialized/reregistered as many times as needed to the same vehicle.
NTB17-1182018-01-29. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. NISSAN; INTELLIGENT KEY IDENTIFICATION AND REGISTRATION TIPS This bulletin applies to vehicles equipped with Intelligent Key only. SERVICE INFORMATION When replacing or adding an Intelligent Key, it is very important to make sure the correct Intelligent Key is selected from the parts department. - A running change was made that will help identify the correct Intelligent Key. - Beginning in late 2017 and early 2018 the last five digits of the Intelligent Key part number is marked on the Intelligent Key under the mechanical key. - See page 2 for location images of this part number addition. NOTE: - A correct Intelligent Key may or may not have the last five digits of the part number as shown on page 2. - The above running change was applied as a ?help? to identify the correct Intelligent Key for a given vehicle, but the actual part number listed in the parts catalog did not change. - Make sure to use the electronic parts catalog (FAST) or equivalent to confirm the correct Intelligent Key for a given vehicle.
NTB17-057a2018-01-29. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. 2015-2017 ROGUE AND 2017-2018 ROGUE SPORT; DISTANCE TO EMPTY DOES NOT RESET This bulletin has been amended. Changes have been made throughout. Please discard all previous versions of this bulletin.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.