WenmarOpen by Wenmar Pro

Service bulletins for the 2020 Nissan Altima

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

146 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
NTB15-049u2020-07-10. Service bulletin. ELECTRICAL SYSTEM. TELEMATICS SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB15-049t2020-03-07. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. TELEMATICS SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB19-1182020-01-09. Service bulletin. ELECTRICAL SYSTEM. ALTIMA, KICKS AND VERSA SEDAN; MIL ON WITH DTC B26FE IF YOU CONFIRM • A “Key System Error” message is displayed on the combination meter, And • DTC B26FE (IPDM - KEY SYSTEM ERROR) is stored in the BCM. ACTION 1. Disconnect the main power harness connector from the IPDM (E16 for Altima and E42 for Kicks and Versa Sedan). • - See Figure 1, Figure 2 and Figure 3 on the next page for IPDM main power harness connector locations. 2. Wait at least 20 seconds. 3. Reconnect the main power harness connector to the IPDM. 4. Confirm that the DTC is now past, and then erase the DTC. If the DTC will not erase, refer to the Electronic Service Manual for additional diagnostic information.
NTB19-1002019-12-06. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT ADAPTIVE/MOBILITY. 2019-2020 ALTIMA; FOAM OUT OF POSITION AND VISIBLE AT LEADING EDGE OF INSTRUMENT PANEL IF YOU CONFIRM There is foam out of position and visible between the leading edge of the instrument panel and the bottom of the windshield (Figure 1 shows foam out of position as viewed from outside the vehicle on the passenger side). ACTION Remove the foam following the SERVICE PROCEDURE on the next page.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.