# Service bulletins for the 1995 Mazda Protege

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

56 bulletins from NHTSA, as of 2026-10-19.

- [0900716](/bulletins/10213425.md), 2022-06-06, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER. Speedometer replacement procedure
- [00\-003\-19\-3583](/bulletins/10154879.md), 2019-03-21, Service bulletin: FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY; FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING; EQUIPMENT. In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
- [09\-009\-19\-3566](/bulletins/10153339.md), 2019-02-19, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper\-proof speedometers. When a speedometer is replaced, the new speedometer will read zero \(0\) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster \(IPC\) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after\-warranty assistance \(AWA\) or DSA that can be utilized to cover this service expense.
- [09\-034\-18\-3430a](/bulletins/10148072.md), 2018-11-13, Service bulletin: EQUIPMENT; VEHICLE SPEED CONTROL. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper\-proof speedometers. When a speedometer is replaced, the new speedometer will read zero \(0\) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster \(IPC\) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after\- warranty assistance \(AWA\) or DSA that can be utilized to cover this service expense.
- [09\-034\-18\-3430](/bulletins/10144333.md), 2018-09-10, Service bulletin: VEHICLE SPEED CONTROL. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper\-proof speedometers. When a speedometer is replaced, the new speedometer will read zero \(0\) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster \(IPC\) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after\-warranty assistance \(AWA\) or DSA that can be utilized to cover this service expense.
- [09\-035\-17\-3080](/bulletins/10118467.md), 2017-10-04, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper\-proof speedometers. When a speedometer is replaced, the new speedometer will read zero \(0\) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster \(IPC\) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after\- warranty assistance \(AWA\) or DSA that can be utilized to cover this service expense.
- [09\-034\-14\-2956](/bulletins/10098367.md), 2017-05-05, Service bulletin: EQUIPMENT ADAPTIVE/MOBILITY. IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:•MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER\-PROOF SPEEDOMETERS.•WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO \(0\) MILES.•THIS PROCEDURE IS EXTREMELY IMPORTANT TO ACCURATELY REPRESENT ACTUAL VEHICLE MILEAGE.•PRIOR TO SPEEDOMETER REMOVAL, COMPLETE THE INFORMATION REQUIRED ON THE “SPEEDOMETER REPLACE\-MENT LABEL”. •LABELS CAN ONLY BE ORDERED THROUGH MSTORE, NOT MDCS.
- [SA287](/bulletins/10086521.md), 2016-12-17, Service bulletin: ELECTRICAL SYSTEM:IGNITION. DUE TO DIFFERENCES IN THE 1995\-1998 PROTÉGÉ IGNITION SWITCH DESIGN, THE REPAIR PROCEDURE AND WARRANTY INFORMATION FOR RECALL 8715J HAS BEEN UPDATED.
- [0800306](/bulletins/10021000.md), 2007-02-22, Service bulletin: AIR BAGS. NON GENUINE ACCESSORIES AFFECT AIR BAG OPERATION. \*KB
- [0102504](/bulletins/10009427.md), 2004-09-29, Service bulletin: ELECTRICAL SYSTEM:12V/24V/48V BATTERY. BATTERY TEST PROCEDURE REQUIREMENTS. \*TT
- [0902604](/bulletins/10009424.md), 2004-09-29, Service bulletin: EQUIPMENT:ELECTRICAL. SPEEDOMETER REPLACEMENT PROCEDURE. \*TT
- [01100R](/bulletins/614908.md), 2000-12-15, Service bulletin: LATCHES/LOCKS/LINKAGES:DOORS:LATCH. ON SOME VEHICLES WITHIN CERTAIN VINS, THE DOOR KEY CYLINDER FLAP MAY BREAK ALLOWING A PIECE\(S\) OF THE FLAP TO ENTER THE CYLINDER THEREBY MAKING IT DIFFICULT TO INSERT THE KEY AND CAUSING KEY ROTATION TO STICK. \*TT
- [00200R](/bulletins/614902.md), 2000-12-15, Service bulletin: SUSPENSION. THIS BULLETIN EXPLAINS CAMBER ADJUSTMENT PROCEDURES. \*TT
- [01098](/bulletins/6092410.md), 2000-12-07, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). SOME VEHICLES MAY EXHIBIT ERRATIC SHIFTING, O/D OFF INDICATOR LIGHT FLASHING WITH MALFUNCTION INDICATOR LAMP ON AS A RESULT OF THE VALVE BODY HARNESS \(TRANSAXLE FLUID TEMPERATURE SENSOR CIRCUIT\) BEING PINCHED BY A METAL CLIP WHICH IS ATTACHED TO THE TRANSMISSION CONTROL VALVE BODY, CAUSING A SHORT / OPEN CIRCUIT. \*TT
- [00100](/bulletins/609953.md), 2000-04-11, Service bulletin: EQUIPMENT:APPLIANCE:AIR CONDITIONER. SOME VEHICLES MAY EXHIBIT THE AIR CONDITIONING \(A/C\) SYSTEM INOPERATIVE WITH THE MALFUNCTION INDICATOR LAMP \(MIL\) ON. \*TT
- [01299](/bulletins/608126.md), 1999-11-05, Service bulletin: STRUCTURE:BODY. SUBJECT REGARDING PAINT DAMAGE \- IRON PARTICLES / INDUSTRIAL FALLOUT / ACID RAIN. \*TT
- [01399](/bulletins/607902.md), 1999-10-15, Service bulletin: UNKNOWN OR OTHER. CONCERNS WITH DOOR KEY WHICH IS DIFFICULT TO INSERT AND / OR ROTATE. \*TT
- [00299](/bulletins/605988.md), 1999-08-04, Service bulletin: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER. EXPERIENCING POPPING NOISE FROM FRONT BRAKE CALIPER DURING SLOW SPEED BRAKING. \*TT
- [00998](/bulletins/603992.md), 1999-03-15, Service bulletin: POWER TRAIN:AXLE ASSEMBLY. AUTOMATIC TRANSAXLE SELECTOR LEVER IS DIFFICULT TO OPERATE. \*YC
- [00198](/bulletins/603909.md), 1999-03-11, Service bulletin: ENGINE AND ENGINE COOLING. CONCERNS REGARDING THE HEARTER NOT WORKING EFFIECIENTLY OR ENGINE TAKES TOO LING TO WARM\-UP. \*YC
- [00298](/bulletins/603908.md), 1999-03-11, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE:GASOLINE. EXPERIENCING POOR ENGINE PERFORMANCE. \*YC
- [00298](/bulletins/603898.md), 1999-03-11, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION. CONDITIONS WITH THE SHIFT LEVER MOVEMENT MAY BE STIFF WHEN MOVING THROUGH ALL GEAR RANGES. \*YC
- [00198](/bulletins/603891.md), 1999-03-09, Service bulletin: STEERING. CONDITIONS WITH STEERING WHEEL SLIGHTLY OFF CENTER. \*YC
- [00998](/bulletins/603890.md), 1999-03-09, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION. INFORMATION REGARDING A/T SELECTOR LEVER HARD TO OPERATE. \*YC
- [01298](/bulletins/603883.md), 1999-03-09, Service bulletin: VISIBILITY:REARVIEW MIRRORS/DEVICES. CONCERNS WITH MANUAL CONTROL DOOR MIRROR NOT ADJUSTABLE. \*YC

More: [the next page](/v1/vehicles/1995_mazda_protege/bulletins?cursor=1999-03-09_603883) (JSON)

JSON: [/v1/vehicles/1995_mazda_protege/bulletins](/v1/vehicles/1995_mazda_protege/bulletins)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%201995%20Mazda%20Protege&page=https%3A%2F%2Fopen.wenmarpro.com%2Fmakes%2Fmazda%2Fprotege%2F1995%2Fbulletins&vehicle=1995%20Mazda%20Protege)