# Service bulletins for the 1991 Mazda MPV

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

24 bulletins from NHTSA, as of 2026-10-19.

- [0900716](/bulletins/10213425.md), 2022-06-06, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER. Speedometer replacement procedure
- [09\-009\-19\-3566](/bulletins/10153339.md), 2019-02-19, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper\-proof speedometers. When a speedometer is replaced, the new speedometer will read zero \(0\) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster \(IPC\) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after\-warranty assistance \(AWA\) or DSA that can be utilized to cover this service expense.
- [09\-034\-18\-3430a](/bulletins/10148072.md), 2018-11-13, Service bulletin: EQUIPMENT; VEHICLE SPEED CONTROL. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper\-proof speedometers. When a speedometer is replaced, the new speedometer will read zero \(0\) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster \(IPC\) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after\- warranty assistance \(AWA\) or DSA that can be utilized to cover this service expense.
- [09\-034\-18\-3430](/bulletins/10144333.md), 2018-09-10, Service bulletin: VEHICLE SPEED CONTROL. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper\-proof speedometers. When a speedometer is replaced, the new speedometer will read zero \(0\) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster \(IPC\) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after\-warranty assistance \(AWA\) or DSA that can be utilized to cover this service expense.
- [09\-035\-17\-3080](/bulletins/10118467.md), 2017-10-04, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper\-proof speedometers. When a speedometer is replaced, the new speedometer will read zero \(0\) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster \(IPC\) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after\- warranty assistance \(AWA\) or DSA that can be utilized to cover this service expense.
- [09\-034\-14\-2956](/bulletins/10098367.md), 2017-05-05, Service bulletin: EQUIPMENT ADAPTIVE/MOBILITY. IN ACCORDANCE WITH FEDERAL REGULATIONS, FOLLOW THE PROCEDURE LISTED BELOW WHEN REPLACING A SPEEDOMETER.NOTE:•MAZDA VEHICLES ARE MANUFACTURED WITH TAMPER\-PROOF SPEEDOMETERS.•WHEN A SPEEDOMETER IS REPLACED, THE NEW SPEEDOMETER WILL READ ZERO \(0\) MILES.•THIS PROCEDURE IS EXTREMELY IMPORTANT TO ACCURATELY REPRESENT ACTUAL VEHICLE MILEAGE.•PRIOR TO SPEEDOMETER REMOVAL, COMPLETE THE INFORMATION REQUIRED ON THE “SPEEDOMETER REPLACE\-MENT LABEL”. •LABELS CAN ONLY BE ORDERED THROUGH MSTORE, NOT MDCS.
- [0102504](/bulletins/10009427.md), 2004-09-29, Service bulletin: ELECTRICAL SYSTEM:12V/24V/48V BATTERY. BATTERY TEST PROCEDURE REQUIREMENTS. \*TT
- [0902604](/bulletins/10009424.md), 2004-09-29, Service bulletin: EQUIPMENT:ELECTRICAL. SPEEDOMETER REPLACEMENT PROCEDURE. \*TT
- [00100R](/bulletins/621310.md), 2001-09-17, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE. SOME VEHICLES MAY EXHIBIT A NO START, ROUGH IDLE AND / OR LACK OF POWER AFTER A 60,000 MILE TIMING BELT REPLACEMENT INTERVAL. \*TT
- [00200](/bulletins/609949.md), 2000-04-11, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE. SUBJECT REGARDING 60,000 MILE SERVICE, INSPECTION AND / OR REPLACEMENT OF THE TENSIONER PULLEY. \*TT
- [00198](/bulletins/603906.md), 1999-03-11, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE. SOME VEHICLES MAY EXPERIENCE HLA NOISE. \*YC
- [00198](/bulletins/603891.md), 1999-03-09, Service bulletin: STEERING. CONDITIONS WITH STEERING WHEEL SLIGHTLY OFF CENTER. \*YC
- [00598](/bulletins/603854.md), 1999-03-08, Service bulletin: SEAT BELTS. INFORMATION REGARDING SEAT BELT EXTENDERS. \*YC
- [00198](/bulletins/600148.md), 1998-04-27, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE. CONCERNS WITH HLA NOISE HEARD AFTER A COLD START. \*YC
- [007/97T](/bulletins/52520.md), 1997-08-14, Service bulletin: AIR BAGS. PARTS REPLACEMENT AFTER AIRBAG DEPLOYMENT. \*TW
- [001/97G](/bulletins/52503.md), 1997-08-14, Service bulletin: ELECTRICAL SYSTEM:12V/24V/48V BATTERY. MAINTENANCE FREE BATTERY \- DIAGNOSTIC AND CHARGING PROCEDURE. \*TW
- [008/97](/bulletins/52497.md), 1997-08-14, Service bulletin: EQUIPMENT:APPLIANCE:AIR CONDITIONER. USE OF A/C TRACER DYE. \*TW
- [003/97G](/bulletins/52492.md), 1997-08-14, Service bulletin: ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS. WIPER MOTOR INOPERATIVE \- CIRCUIT BREAKER ACTIVATION. \*TW
- [001/97K](/bulletins/52487.md), 1997-08-14, Service bulletin: ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD. REPLACEMENT CONNECTORS FOR ECAT SOLENOID HARNESS. \*TW
- [001/97F](/bulletins/52481.md), 1997-08-14, Service bulletin: FUEL SYSTEM, GASOLINE:STORAGE. FUEL ODOR \- GASOLINE SMELL MAY BE ENTERING THE PASSENGER COMPARTMENT. \*TW
- [001/97N](/bulletins/52469.md), 1997-08-14, Service bulletin: STEERING:HYDRAULIC POWER ASSIST SYSTEM. POWER STEERING FLUID HOSE COMES OFF. \*TW
- [013/95](/bulletins/46704.md), 1996-04-25, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE. CYLINDER HEAD GASKET MODIFICATION. \*SD
- [T004/95](/bulletins/40067.md), 1995-11-01, Service bulletin: ELECTRICAL SYSTEM:WIRING. THE REAR DEFROSTER SWITCH HARNESS HAS BEEN MODIFIED. \*TW
- [001/93](/bulletins/39688.md), 1995-11-01, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION. HARD SHIFT, R\-TYPE TRANSMISSION. \*TW

JSON: [/v1/vehicles/1991_mazda_mpv/bulletins](/v1/vehicles/1991_mazda_mpv/bulletins)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%201991%20Mazda%20MPV&page=https%3A%2F%2Fopen.wenmarpro.com%2Fmakes%2Fmazda%2Fmpv%2F1991%2Fbulletins&vehicle=1991%20Mazda%20MPV)