# P061B on the 2015 Mazda CX\-5

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

Nobody has written a description of this code yet.

## Bulletins for this model year that name P061B

- [10185814](https://open.wenmarpro.com/bulletins/10185814), 2021-01-25: Check engine light \(with DTCs P0101, P061B, P2122, P2138\) may illuminate after PCM reprogramming due to a mislogic detection in the PCM calibration, available in the current IDs version 103.03. Please uninstall IDS and install version 103.00 to prevent this situation and "do not update ids until further notice"
- [10160551](https://open.wenmarpro.com/bulletins/10160551), 2019-05-30: Some vehicles may experience a lack of power and the check engine light on with DTC P61B:00 stored in the PCM memory when driving in high temperatures at high elevations. DTC P061B:00 \- \[PCM\] Internal control module torque calculation performance problem This concern may be caused by improper PCM control logic. The engine torque calculation error may increase in high temperatures at high elevations. To eliminate this concern, the PCM software has been modified.
- [10155435](https://open.wenmarpro.com/bulletins/10155435), 2019-03-29: Some vehicles may experience a lack of power and the check engine light on with DTC P61B:00 stored in the PCM memory when driving in high temperatures at high elevations. DTC P061B:00 \- \[PCM\] Internal control module torque calculation performance problem.This concern may be caused by improper PCM control logic. The engine torque calculation error may increase in high temperatures at high elevations. To eliminate this concern, the PCM software has been modified.
- [10148007](https://open.wenmarpro.com/bulletins/10148007), 2018-11-13: Some vehicles may experience a lack of power and the check engine light on with DTC P61B:00 stored in the PCM memory when driving in high temperatures at high elevations. DTC P061B:00 \- \[PCM\] Internal control module torque calculation performance problem. This concern may be caused by improper PCM control logic. The engine torque calculation error may increase in high temperatures at high elevations. To eliminate this concern, the PCM software has been modified.
- [10111035](https://open.wenmarpro.com/bulletins/10111035), 2017-08-10: Some 2012\-2016 Mazda3s, 2013\-2015 CX\-5s and 2014\-2015 Mazda6s may experience the Check Engine Light ON with DTC P0101 and/or P061B and/or driveability problem after reprogramming the PCM using IDS versions 105.02 to 105.04. If the PCM is reprogrammed with any software number included in the attached file and the throttle valve has too much carbon build up, the engine air amount calculation by the problem software may not be accurate. Perform the following Repair Procedure to correct this issue. NOTE Current version of IDS is 106.02.