# Recalls that may apply to the 2002 Mack MR

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

## United States (NHTSA), as of 2026-10-19

- [12V017000](/recalls/nhtsa/12V017000.md), 2012-01-20: SUSPENSION:FRONT. MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2002\-2005 MR AND LE HEAVY TRUCKS, MANUFACTURED FROM FEBRUARY 1, 2002, THROUGH DECEMBER 22, 2004.  OVER TIME, THE VEHICLE’S LOAD MAY RESULT IN FATIGUE CRACKS OF THE FRONT AXLE BEAM.  THESE CRACKS CAN PROPAGATE AND RESULT IN COMPLETE FRACTURE OF THE AXLE BEAM. Built 2002\-02\-01 to 2004\-12\-22.
- [10V069000](/recalls/nhtsa/10V069000.md), 2010-03-03: POWER TRAIN:AXLE ASSEMBLY. MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2002 THROUGH 2004 CL, CV, LE, MR, RB, RD, AND MODEL YEAR 2003 THROUGH 2004 DM HEAVY TRUCKS MANUFACTURED FROM FEBRUARY 1, 2002 THROUGH SEPTEMBER 30, 2003, EQUIPPED WITH AXLE BEAMS MANUFACTURED BY BHARAT FORGE.  THE AXLE BEAM MAY HAVE TRANSVERSE SHEAR LINES ON THE BOTTOM OF THE AXLE FROM THE TRIMMING PROCESS. Built 2002\-02\-01 to 2003\-09\-30.
- [04V258000](/recalls/nhtsa/04V258000.md), 2004-06-07: SERVICE BRAKES, AIR:DRUM. ON CERTAIN CLASS 8 CHASSIS BUILT WITH HENDRICKSON LIFT AXLES WHICH CONTAINED WEBB BRAKE DRUMS, THE BRAKE DRUMS COULD EXPERIENCE PREMATURE CRACK OF THE BRAKING SURFACE RESULTING IN REDUCTION OR COMPLETE LOSS OF BRAKING ON THAT WHEEL END OR LOSS OF BRAKE DRUM PIECES.
- [04V159000](/recalls/nhtsa/04V159000.md), 2004-04-07: FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:PRESSURE RELIEF DEVICES. ON CERTAIN CHASSIS BUILT WITH LNG ENGINES, THE NEXGEN LNG TANK'S PRIMARY AND SECONDARY RELIEF VALVES  COULD FAIL TO OPEN AND RELIEVE TANK PRESSURE. Built 1995\-04\-26 to 2004\-02\-09.

## Canada (Transport Canada), as of 2026-10-19

- [2012016](/recalls/tc/2012016.md), 2012-01-19: Suspension. On certain trucks, the front axle beam may have been manufactured incorrectly.  In certain application the load on the axle could allow stress cracks to form which, over time, may cause the axle beam to fail.  This could result in a vehicle crash causing property damage and/or personal injury.  Correction: Dealers will inspect and, if required, replace the axle beam.  Note: This campaign also covers MR and LE vehicles previously repaired under recall 2009199 \(Mack SC0341\).
- [2009199](/recalls/tc/2009199.md), 2009-07-07: Suspension. On certain vehicles, the front axle beam may not have been manufactured correctly.  Transverse shear lines on the bottom of the axle could allow cracks to form which, over time, may cause the axle beam to fail.  This could result in a vehicle crash causing property damage, personal injury or death.  Correction: Dealers will inspect and, if required, replace the axle beam.
- [2002189](/recalls/tc/2002189.md), 2002-10-15: Brakes. On certain vehicles, additional axles were installed to increase the gross vehicle weight capacity but the parking brake capacity was not increased accordingly therefore not complying with CMVSS 121 regulations.  Correction:  The dealer will perform repairs as necessary.

## Check a VIN

- [NHTSA recall lookup by VIN, United States](https://www.nhtsa.gov/recalls)
- [Transport Canada recall search, Canada](https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng)

Contains information licensed under the Open Government Licence – Canada.

JSON: [/v1/vehicles/2002_mack_mr/recalls](/v1/vehicles/2002_mack_mr/recalls)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%202002%20Mack%20MR&page=https%3A%2F%2Fopen.wenmarpro.com%2Fmakes%2Fmack%2Fmr%2F2002%2Frecalls&vehicle=2002%20Mack%20MR)