# P011B on the 2013 Land Rover LR2

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

Nobody has written a description of this code yet.

## Bulletins for this model year that name P011B

- [10106221](https://open.wenmarpro.com/bulletins/10106221), 2017-06-13: "SITUATION: THE ENGINE MALFUNCTION INDICATOR LAMP \(MIL\) MAY BE ILLUMINATED WITH THE FOLLOWING DIAGNOSTIC TROUBLE CODES \(DTC\) STORED IN THE POWERTRAIN CONTROL MODULE \(PCM\) AND NO HARDWARE FAULT: • P011621: ENGINE COOLANT TEMPERATURE SENSOR 1 CIRCUIT RANGE/PERFORMANCE \(FAULT ON START UP AFTER USING BLOCK HEATER\) • P011B22: ENGINE COOLANT TEMPERATURE / INTAKE AIR TEMPERATURE CORRELATION \(FAULT ON START UP AFTER USING BLOCK HEATER\) • P013A00: O2 SENSOR SLOW RESPONSE RICH TO LEAN \(BANK 1 AND SENSOR 2\) • P131500: PERSISTENT MISFIRE • P030000: RANDOM MISFIRE DETECTED • P030100: CYLINDER 1 MISFIRE DETECTED • P030200: CYLINDER 2 MISFIRE DETECTED • P030300: CYLINDER 3 MISFIRE DETECTED • P030400: CYLINDER 4 MISFIRE DETECTED"
- [10105589](https://open.wenmarpro.com/bulletins/10105589), 2017-06-08: "SITUATION: ONLY ON VEHICLES FITTED WITH A LAND ROVER\-APPROVED ENGINE COOLANT HEATER \(BLOCK HEATER\), THE ENGINE MALFUNCTION INDICATOR LAMP \(MIL\) MAY BE ILLUMINATED WITH DIAGNOSTIC TROUBLE CODES \(DTC\) P0116\-21, P011B\-22, P2183\-00, OR P2183\-22 STORED IN THE ENGINE CONTROL MODULE \(ECM\) AND NO HARDWARE FAULT. CAUSE: THIS MAY BE CAUSED BY AN ON\-BOARD DIAGNOSTICS \(OBD\) CALIBRATION ERROR."