WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Jeep Wagoneer

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

619 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Lighting are shown. Show all

Bulletins, newest first
0805922REVB2022-10-31. Service bulletin. EXTERIOR LIGHTING:FOG LIGHTS; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; VISIBILITY; EXTERIOR LIGHTING. Fog Lamps Inoperable This bulletin involves replacing both fog lamp assemblies due to the harness connector failing. The customer may describe inoperable fog lights with a ?Right / Left Front Lighting Service Required? message in the Instrument Panel Cluster (IPC).
08014222022-10-17. Service bulletin. STEERING; ENGINE AND ENGINE COOLING; EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Flash: Drivetrain Control Module (DTCM) Updates This bulletin involves reprogramming the DTCM with the latest available software. The customer may describe one or more of the following: ?Service 4WD warning? displayed in the Instrument Panel Cluster (IPC). A binding or heavy steering feel when making sharp turns at low speeds. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DiagnosticTrouble Codes (DTCs) have been set:C1423-64 -Transfer Case Internal Performance-Signal Plausibility Failure. C149E-64 - Transfer Case Motor Position Sensor-Signal Plausibility Failure.
2300622REVC2022-09-26. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING; SEATS. Heated Seat Calibration Update This bulletin involves updating the HVAC module with the latest software, checkingthe operation of the front heated seats and repairing as required. Customers may comment on the following: Front row heated seats (driver and/or passenger) will not stay on and shutsitself off in less then 15 minutes while occupied. Customers will not experience a Malfunction Indicator Lamp (MIL) illumination or Diagnostic Trouble Codes (DTCs) for this symptom/condition.
23024222022-09-26. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS. Headlamp Condensation Clearing Procedure This bulletin is to communicate the procedure for headlamp condensation clearing.
08-037-222022-06-27. Service bulletin. EQUIPMENT; EXTERIOR LIGHTING:TAIL LIGHTS. Rear Tail Lamp Condensation Clearing Procedure This bulletin is to communicate the procedure for rear tail lamp condensation clearing. Some customers may report that on occasion, vehicle exterior tail lamp assemblies are fogged with a light layer of condensation on the inside of the lenses. This may be reported after the lamps have been turned on and brought up to operatingtemperature, turned off, and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e., a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into avapor. Turning the tail lamps on will usually accelerate this process.Clear Tail Lamp AssemblyTail Lamp Assembly with CondensationImages are not specific to vehicle, and only used for showing the tail lamps either clearFig. 1or having a condensation build up within the tail lamp assemblyFig. 2per the procedure.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.