Service bulletins for the 2022 Jeep Wagoneer
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
619 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Equipment and accessories are shown. Show all
| S2108000198 | 2022-08-22. Service bulletin. EQUIPMENT:ELECTRICAL. Media Device Connection Guidelines For Bluetooth, Apple CarPlay, Android Auto Or USB To The Radio Head Unit |
|---|---|
| 08-099-22 | 2022-06-27. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; STRUCTURE:BODY:STEP/LADDER. Power Side Step Module (PSSM) Update This bulletin involves reprogramming the PSSM with the latest available software. The customer may experience one or more of the following: The power side steps still deploy/retract after being disabled (i.e. PowerSide Step Store Mode) from the radio settings, this is observed when the vehicle just wakes up from sleep. The PSSM will not be able to enter sleep mode (resulting in a batterydrain) the moment the power side step radio setting is changed from ?Auto? to ?Store? mode and closing a door at the same time (changing radio setting within five seconds after a door is closed). |
| 08-097-22 | 2022-06-27. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING:ENGINE. Flash: Hybrid Control Processor (HCP) Updates This bulletin involves updating the HCP with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Code (DTC) has been set: P1C64 - Hybrid Perf - Engine Speed Below Target During Autostart. In addition, customers may experience the following concern: During a stop-start event, the autostart fails and the AutoPark engages. |
| 08-037-22 | 2022-06-27. Service bulletin. EQUIPMENT; EXTERIOR LIGHTING:TAIL LIGHTS. Rear Tail Lamp Condensation Clearing Procedure This bulletin is to communicate the procedure for rear tail lamp condensation clearing. Some customers may report that on occasion, vehicle exterior tail lamp assemblies are fogged with a light layer of condensation on the inside of the lenses. This may be reported after the lamps have been turned on and brought up to operatingtemperature, turned off, and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e., a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into avapor. Turning the tail lamps on will usually accelerate this process.Clear Tail Lamp AssemblyTail Lamp Assembly with CondensationImages are not specific to vehicle, and only used for showing the tail lamps either clearFig. 1or having a condensation build up within the tail lamp assemblyFig. 2per the procedure. |
| Z49 | 2022-06-27. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Customer Satisfaction Notification Z49 Hybrid Control Porcessor (HCP) Updates |
| S2208000116 | 2022-06-27. Service bulletin. EQUIPMENT; STRUCTURE:BODY:HATCHBACK/LIFTGATE; ELECTRICAL SYSTEM. Hands-Free Power Liftgate Does Not Operate |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.