WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Jeep Wagoneer S

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

248 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
S25080000112025-02-07. Service bulletin. ELECTRICAL SYSTEM. P1CDE-00 - Hybrid/EV Wake-Up Control 2 Output Circuit Short To Battery Set In The Battery Pack Control Module (BPCM)
08-010-25 REV. A2025-02-04. Service bulletin. ELECTRICAL SYSTEM. "Flash: Motor Control Processor A (MCP A) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. Customers may also comment on one or more of the following: ● Wrench lamp on in the Instrument Panel Cluster (IPC). ● Not able to move the shifter out of Park. ● Vehicle has reduced power. This bulletin also includes the following software enhancement: ● Software enhancement to prevent erroneous fault identification resulting in inverter shutdown This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then performing a Wheel End Disconnect Position Learn routine"
S1408000384 REV.H2025-01-28. Service bulletin. ELECTRICAL SYSTEM. Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
08-014-252025-01-22. Service bulletin. ELECTRICAL SYSTEM. "Flash: Electronic Vehicle Control Unit (EVCU) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C10F8-00 - Left Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● C10F9-00 - Right Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● P061B-00 - Internal Control Module Torque Calculation Performance. Customers may also comment on one or more of the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon is illuminated on the IPC. ● Vehicle enters into limp home mode. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then performing a Wheel End Disconnect Position Learn routine"
08-013-252025-01-22. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. "Flash: Motor Control Processor B (MCP B) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. Customers may also comment on one or more of the following: ● Wrench lamp on in the Instrument Panel Cluster (IPC). ● Not able to move the shifter out of Park. ● Vehicle has reduced power. This bulletin also includes the following software enhancement: ● Software enhancement to prevent erroneous fault identification resulting in inverter shutdown This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then performing a Wheel End Disconnect Position Learn routine"
08-010-252025-01-22. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. "Flash: Motor Control Processor A (MCP A) Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. Customers may also comment on one or more of the following: ● Wrench lamp on in the Instrument Panel Cluster (IPC). ● Not able to move the shifter out of Park. ● Vehicle has reduced power. This bulletin also includes the following software enhancement: ● Software enhancement to prevent erroneous fault identification resulting in inverter shutdown. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then performing a Wheel End Disconnect Position Learn routine"
08-011-252025-01-21. Service bulletin. ELECTRICAL SYSTEM. "Flash: Battery Pack Control Module (BPCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0ADB-00 - Hybrid/EV Battery Positive Contractor A Control Circuit Low. ● P0AE2-00 - Hybrid/EV Battery Precharge Contactor Circuit Stuck Closed. Customers may also comment on one or more of the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Vehicle will not enter Drive Ready Mode. ● Battery range incorrect. This bulletin also includes the following software enhancement: ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then performing a Wheel End Disconnect Position Learn routine"
S25080000052025-01-10. Service bulletin. ELECTRICAL SYSTEM. Diagnostic Trouble Codes (DTCs) Setting in the Battery Pack Control Module (BPCM) During Servicing
S25080000012025-01-09. Service bulletin. ELECTRICAL SYSTEM. Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Firmware Over the Air (FOTA) Does Not Download or Battery Warning Lamp On
S1408000384 REV.G2025-01-09. Service bulletin. ELECTRICAL SYSTEM. Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
08-263-242025-01-03. Service bulletin. ELECTRICAL SYSTEM. "Flash: Battery Pack Control Module (BPCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Codes (DTCs): ● P0ADB-00 - Hybrid/EV Battery Positive Contractor A Control Circuit Low. ● P0AE2-00 - Hybrid/EV Battery Precharge Contactor Circuit Stuck Closed. Customers may also comment on one or more of the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Vehicle will not enter Drive Ready Mode. ● Battery range incorrect. This bulletin also includes the following software enhancement: ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then performing a Wheel End Disconnect Position Learn routine. "
08-262-242025-01-03. Service bulletin. ELECTRICAL SYSTEM. "Flash: Motor Control Processor B (MCP B) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. Customers may also comment on one or more of the following: ● Wrench lamp on in the Instrument Panel Cluster (IPC). ● Not able to move the shifter out of Park. ● Vehicle has reduced power. This bulletin also includes the following software enhancement: ● Software enhancement to prevent erroneous fault identification resulting in inverter shutdown. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then performing a Wheel End Disconnect Position Learn routine. "
08-261-242025-01-03. Service bulletin. ELECTRICAL SYSTEM. "Flash: Motor Control Processor A (MCP A) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. Customers may also comment on one or more of the following: ● Wrench lamp on in the Instrument Panel Cluster (IPC). ● Not able to move the shifter out of Park. ● Vehicle has reduced power. This bulletin also includes the following software enhancement: ● Software enhancement to prevent erroneous fault identification resulting in inverter shutdown. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then performing a Wheel End Disconnect Position Learn routine."
08-260-242025-01-03. Service bulletin. ELECTRICAL SYSTEM; SERVICE BRAKES. "Flash: Electronic Vehicle Control Unit (EVCU) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C10F8-00 - Left Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● C10F9-00 - Right Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● P061B-00 - Internal Control Module Torque Calculation Performance. Customers may also comment on one or more of the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon is illuminated on the IPC. ● Vehicle enters into limp home mode. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine."
S24080001272024-12-21. Service bulletin. ELECTRICAL SYSTEM. Instrument Panel Cluster (IPC) Sets Diagnostic Trouble Code (DTC) U0158-00 Lost Communication With the HUD Heads Up Display
S24080001262024-12-21. Service bulletin. ELECTRICAL SYSTEM. Diagnostic Trouble Code (DTC) B1A0A-00 Remote Keyless Entry (RKE) FOB 3 Performance
S24080000882024-08-08. Service bulletin. ELECTRICAL SYSTEM. Radio (ETM) Is Setting Active DTC B15A1-00 Media Port Connection

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.