C2020 on the 2015 Jeep Renegade
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
This code is specific to a manufacturer and is not described here. Its meaning is in the manufacturer's service information.
| 0802721 | 2022-09-26. Service bulletin. Flash: Drivetrain Control Module (DTCM) Diagnostic and System Improvements This bulletin involves reprogramming the DTCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs):C2502-64 - Signal Plausibility Failure. C2210-92 - ETM Hall Sensor Performance Or Incorrect Operation. C2220-54 - ETM Calibration Error Missing Calibration. C2020-01 - ECU Internal Fault - General Electrical Failure. This software update also includes the following enhancementsReduce Rear Drive Module (RDM) noise during disconnect phase at speeds above 45 kph (28 mph)North America Only. |
|---|---|
| 08-110-17 | 2022-08-08. Service bulletin. Flash: Drivetrain Control Module (DTCM) Diagnostic and System Improvements This bulletin involves reprogramming the DTCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs:C2502-64 - Signal Plausibility Failure. C2210-92 - ETM Hall Sensor Performance Or Incorrect Operation. C2220-54 - ETM Calibration Error Missing Calibration. C2020-01 - ECU Internal Fault - General Electrical Failure. |
| 21-038-15 REV. B | 2022-08-08. Service bulletin. Flash: Drivetrain Control Module (DTCM) C2020-01 ECU Internal Fault setting in the DTCM This bulletin involves reprogramming the Drivetrain Control Module (DTCM) with the latest available software. Some vehicles may experience the All Wheel Drive Light (AWD) illuminating due to DTC C2020-01 ECU Internal Fault setting erroneously in the DTCM. |
| 21-038-15 REV. A | 2022-08-08. Service bulletin. Flash: Drivetrain Control Module (DTCM) C2020-01 ECU Internal Fault setting in the DTCM This bulletin involves reprogramming the Drivetrain Control Module (DTCM) with the latest available software. Some vehicles may experience the All Wheel Drive Light (AWD) illuminating due to DTC C2020-01 ECU Internal Fault setting erroneously in the DTCM. |
| 21-048-15 REV. A | 2022-08-08. Service bulletin. Flash: Drivetrain Control Module C2020-01 ECU Internal Fault setting in the DTCM This bulletin involves reprogramming the Drivetrain Control Module (DTCM) with the latest available software. Some vehicles may experience the All Wheel Drive Light (AWD) illuminating due to DTC C2020-01 ECU Internal Fault setting erroneously in the DTCM. |
| 08-110-17 | 2022-07-25. Service bulletin. Flash: Drivetrain Control Module (DTCM) Diagnostic and System Improvements This bulletin involves reprogramming the DTCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs:C2502-64 - Signal Plausibility Failure. C2210-92 - ETM Hall Sensor Performance Or Incorrect Operation. C2220-54 - ETM Calibration Error Missing Calibration. C2020-01 - ECU Internal Fault - General Electrical Failure. |
| 21-038-15 REV. B | 2022-07-25. Service bulletin. Flash: Drivetrain Control Module (DTCM) C2020-01 ECU Internal Fault setting in the DTCM This bulletin involves reprogramming the Drivetrain Control Module (DTCM) with the latest available software. Some vehicles may experience the All Wheel Drive Light (AWD) illuminating due to DTC C2020-01 ECU Internal Fault setting erroneously in the DTCM. |
| 21-038-15 REV. A | 2022-07-25. Service bulletin. Flash: Drivetrain Control Module (DTCM) C2020-01 ECU Internal Fault setting in the DTCM This bulletin involves reprogramming the Drivetrain Control Module (DTCM) with the latest available software. Some vehicles may experience the All Wheel Drive Light (AWD) illuminating due to DTC C2020-01 ECU Internal Fault setting erroneously in the DTCM. |
| 21-048-15 REV. A | 2022-07-25. Service bulletin. Flash: Drivetrain Control Module C2020-01 ECU Internal Fault setting in the DTCM This bulletin involves reprogramming the Drivetrain Control Module (DTCM) with the latest available software. Some vehicles may experience the All Wheel Drive Light (AWD) illuminating due to DTC C2020-01 ECU Internal Fault setting erroneously in the DTCM. |
| 08-027-21 | 2021-03-15. Service bulletin. Flash: Drivetrain Control Module (DTCM) Diagnostic and System Improvements This bulletin involves reprogramming the DTCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs):C2502-64 - Signal Plausibility Failure. C2210-92 - ETM Hall Sensor Performance Or Incorrect Operation. C2220-54 - ETM Calibration Error Missing Calibration. C2020-01 - ECU Internal Fault - General Electrical Failure. This software update also includes the following enhancementsReduce Rear Drive Module (RDM) noise during disconnect phase at speeds above 45 kph (28 mph)North America Only. |
14 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.