C10ED on the 2025 Jeep Compass
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
This code is specific to a manufacturer and is not described here. Its meaning is in the manufacturer's service information.
| 9100783 | 2026-03-18. Service bulletin. MP park brake light on and service park brake message on the cluster. The following DTCs can be present C10D0 - Electronic Park Brake System Failure C10ED - Electronic Park Brake Switch LED C10CD - Electronic Park Brake Switch - General Electrical Failure 1. Check there is no lose connection on the Park Brake Switch 2. Check there is no damage in connector D3863A, specially for the following circuits: - D497 - B65 Note: There is a reported issue on the harness from the Antilock Brake System (ABS), the harness is being damaged by a TCM bracket. If there is an issue found on the harness, DO NOT replace the Park Brake Switch. Repair instructions are documented in SOL S2508000069 3. If there are no issues found on the harness and switch is replaced. Please send the part to QEC |
|---|---|
| 9100754 | 2026-01-21. Service bulletin. Symptoms/Condition: Service Park Brake message on the cluster AND other warning in the cluster If any of the following DTCs are present for the Park Brake Switch: C10ED-00 Electronic Park Brake Switch LED- C10CD-01 Electronic Park Brake Switch-General Electrical Failure 1. Review SOL S2508000069 - there is a reported issue on the harness that is affecting Park Brake Switch performance |
| 9100620 | 2025-07-09. Service bulletin. MP EPB SERVICE BRAKE MESSAGE ON THE CLUSTER AND LED LIGHT ON If any of the following DTCs come as ACTIVE: C10ED-00 Electronic Park Brake Switch LED- C10CD-01 Electronic Park Brake Switch-General Electrical Failure 1. Confirm customer's concern 2. If the DTCs come as STORED, clear them prior to performing any service steps. If the DTCs come as ACTIVE 3. Check that the battery connectors are properly seated as well as the ground connector. 4. Try disconnecting the battery for 5min to reset the module. 5. If the issue with the EPB is still present and there are ACTIVE DTCs, check for any loose connection at the Park Brake Switch or Brake System Module BEFORE replacing the Switch. If after disconnecting the switch and the module, any DTC goes from ACTIVE to STORE, clear them and do not replace the switch. 6. If after following steps 1 to 5 the Park brake switch is not working, replace the switch. Note: If there is any other DTC are present, review Brake System Module BEFORE replacing the switch. C10EA-00 Left Park Brake Actuator- C10EC-00 Park Brak Actuator Correlation C10EB-00-RIGHT PARK BRAKE ACTUATOR |
3 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.