# Service bulletins for the 2010 Jeep Commander

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

51 bulletins from NHTSA, as of 2026-10-19.

- [101232](/bulletins/11010205.md), 2024-11-07, Service bulletin: POWER TRAIN. Plate \- Planetary
- [9100226](/bulletins/10248509.md), 2024-01-08, Service bulletin: ELECTRICAL SYSTEM. Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- [9100226](/bulletins/10244348.md), 2023-10-30, Service bulletin: ELECTRICAL SYSTEM:WIRING. Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- [9100196](/bulletins/10242717.md), 2023-09-25, Service bulletin: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- [P73](/bulletins/10229213.md), 2023-01-09, Service bulletin: AIR BAGS; ELECTRICAL SYSTEM. Customer Satisfaction Notification P73 Reprogram Final Drive Control Module The Final Drive Control Module \(FDCM\) software on about 295,600 of the above vehicles may cause the ?Service 4WD? light to come on and an inability to switch 4WD mode when trying to shift out of the current selected mode. The Final Drive Control Module \(FDCM\) must be reprogrammed with new software.
- [S1709000010](/bulletins/10229031.md), 2023-01-09, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear \(roller failure\) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- [S2209000004](/bulletins/10227983.md), 2022-12-19, Service bulletin: EQUIPMENT; ENGINE AND ENGINE COOLING. If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- [9002887](/bulletins/10223599.md), 2022-10-17, Service bulletin: ENGINE AND ENGINE COOLING. Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.\~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.\~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- [9004009](/bulletins/10221097.md), 2022-09-26, Service bulletin: POWER TRAIN. Transmission Kit with Torque Converter 1. All Promaster \(VF\) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners \(Part Number 06511385A$\) are one\-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both \(2\) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code\(s\) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- [9004361](/bulletins/10220843.md), 2022-09-26, Service bulletin: POWER TRAIN. NAG1 Transmission Before installing the transmission with the engine, check for dowel pins \(2\) for alignment. If the pins are missing request to add the dowel pin first and then install the transmission
- [S1709000010RevB](/bulletins/10220687.md), 2022-09-26, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR; UNKNOWN OR OTHER. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear \(roller failure\) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- [3100519](/bulletins/10220101.md), 2022-09-15, Service bulletin: STRUCTURE. Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- [3100319](/bulletins/10220099.md), 2022-09-15, Service bulletin: STRUCTURE. Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- [3100419](/bulletins/10220098.md), 2022-09-15, Service bulletin: VISIBILITY. Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
- [3100619](/bulletins/10220097.md), 2022-09-15, Service bulletin: STRUCTURE; EQUIPMENT. Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- [9004178](/bulletins/10220015.md), 2022-09-15, Service bulletin: POWER TRAIN:TRANSFER CASE \(4\-WHEEL DRIVE\). DAMPER, Transfer Case Reman Transfer Case will arrive equipped with the Transfer Case Damper. Please return core with original damper intact.
- [21\-022\-14 REV. A](/bulletins/10217727.md), 2022-08-15, Service bulletin: ELECTRICAL SYSTEM; POWER TRAIN; EQUIPMENT. 4WD Lamp Illuminated and Diagnostic Trouble Code C140F Active in Final Drive Control Modules \(FDCM\) Memory This bulletin involves verifying FDCM software level and then flash reprogramming of the FDCM with new software. Customers may indicate that the ?Service 4WD? indicator in the instrument cluster is illuminated. They may also indicate that the transfer case will not shift from 4WD High, 4WD Low, and/or Neutral once the lamp is illuminated. Further investigation identifies that a Diagnostic Trouble Code C140F is stored or active in the Final Drive Control Modules \(FDCM\) Memory
- [21\-022\-14](/bulletins/10217705.md), 2022-08-15, Service bulletin: POWER TRAIN. 4WD Lamp Illuminated and Diagnostic Trouble Code C140F Active in Final Drive Control Modules \(FDCM\) Memory This bulletin involves verifying FDCM software level and then flash reprogramming of the FDCM with new software. Customers may indicate that the ?Service 4WD? indicator in the instrument cluster is illuminated. They may also indicate that the transfer case will not shift from 4WD High, 4WD Low, and/or Neutral once the lamp is illuminated. Further investigation identifies that a Diagnostic Trouble Code C140F is stored or active in the Final Drive Control Modules \(FDCM\) Memory
- [09\-001\-13](/bulletins/10216395.md), 2022-07-25, Service bulletin: SEATS. Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- [N23050813](/bulletins/10216001.md), 2022-07-18, Service bulletin: ELECTRICAL SYSTEM. New Safety Recall Advanced Communication ? N23050813 Chrysler Group LLC \(Chrysler\) announced a safety recall on certain 2005 \- 2010 model year \(WK\) Jeep Grand Cherokee and \(XK\) Jeep Commander vehicles equipped with a Quadra\-Drive II or Quadra\-Trac II four wheel drive system. Some of the above vehicles may experience a transfer case actuator encoder electrical failure that results in unintentional transfer case shifting into or through the neutral position. NOTE: These vehicles are equipped with a NV245 transfer case that is part of the automatic four wheel drive system. The transfer case shifts into and out of four wheel drive modes and ranges automatically or based on driver inputs. Chrysler will conduct a voluntary safety recall on all affected vehicles to reprogram the Final Drive Controller Module \(FDCM\) with new software. The four wheel drive system will then be function tested. Vehicles found with an inoperative transfer case actuator will also have the actuator replaced. Dealers will be notified of the launch of this safety recall by way of established methods used in the past. We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries on involved vehicles.
- [S1709000010 Rev.](/bulletins/10215879.md), 2022-07-18, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear \(roller failure\) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- [S1709000010 RevB](/bulletins/10212290.md), 2022-05-31, Service bulletin: ENGINE AND ENGINE COOLING; ENGINE. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear \(roller failure\) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- [9004361](/bulletins/10190590.md), 2021-04-26, Service bulletin: POWER TRAIN. NAG1 Transmission Before installing the transmission with the engine, check for dowel pins \(2\) for alignment. If the pins are missing request to add the dowel pin first and then install the transmission
- [N23050813](/bulletins/10188696.md), 2021-03-15, Service bulletin: EQUIPMENT; ELECTRICAL SYSTEM; POWER TRAIN:TRANSFER CASE \(4\-WHEEL DRIVE\). New Safety Recall Advanced Communication ? N23050813 Chrysler Group LLC \(Chrysler\) announced a safety recall on certain 2005 \- 2010 model year \(WK\) Jeep Grand Cherokee and \(XK\) Jeep Commander vehicles equipped with a Quadra\-Drive II or Quadra\-Trac II four wheel drive system. Some of the above vehicles may experience a transfer case actuator encoder electrical failure that results in unintentional transfer case shifting into or through the neutral position. NOTE: These vehicles are equipped with a NV245 transfer case that is part of the automatic four wheel drive system. The transfer case shifts into and out of four wheel drive modes and ranges automatically or based on driver inputs. Chrysler will conduct a voluntary safety recall on all affected vehicles to reprogram the Final Drive Controller Module \(FDCM\) with new software. The four wheel drive system will then be function tested. Vehicles found with an inoperative transfer case actuator will also have the actuator replaced. Dealers will be notified of the launch of this safety recall by way of established methods used in the past. We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries on involved vehicles.
- [S1709000010 Rev.](/bulletins/10187058.md), 2021-02-16, Service bulletin: ENGINE AND ENGINE COOLING. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear \(roller failure\) on one or more cam lobes and that camshaft/lifter replacement is necessary.

More: [the next page](/v1/vehicles/2010_jeep_commander/bulletins?cursor=2021-02-16_10187058) (JSON)

JSON: [/v1/vehicles/2010_jeep_commander/bulletins](/v1/vehicles/2010_jeep_commander/bulletins)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%202010%20Jeep%20Commander&page=https%3A%2F%2Fopen.wenmarpro.com%2Fmakes%2Fjeep%2Fcommander%2F2010%2Fbulletins&vehicle=2010%20Jeep%20Commander)