# P1C86 on the 2018 Jeep Cherokee

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

This code is specific to a manufacturer and is not described here.

## Bulletins for this model year that name P1C86

- [10224878](https://open.wenmarpro.com/bulletins/10224878), 2022-10-31: KL Gear Shift Module For 2015\-2018 KL ONLY, if vehicle DTC Code P1C86\-1D \(PRNDL Display Current out of Range\) is verified as either stored or active please contact Pablo Flores in FCA Chassis Engineering at cell \(248\) 979\-7062. If no response in 15 minutes, proceed with repair. For additional repair see NOTES below: NOTE 1: If DTC P1C86\-1D is still active after inspecting harness connections from Service Procedure \(STEP 2\). DO NOT replace SHIFTER ASSEMBLY. Instead, replace PRNDM bezel only. NOTE 2: After replacing PRNDL Assembly, clear DTCs and check to confirm DTC does not return. Please return parts back to FCA Engineering if PRNDM is deemed non\-functional after performing this Tech Tip. For 2015\-2018 KL ONLY; If vehicle DTC Code P1C86\-1D \(PRNDL Display Current out of Range\) is verified as either stored or active please contact Pablo Flores in FCA Chassis Engineering at cell \(248\) 979\- 7062. If no response in 15 minutes, proceed with repair. For additional repair see NOTES below: NOTE 1: If DTC P1C86\-1D is still active after inspecting harness connections from Service Procedure \(STEP 2\). DO NOT replace SHIFTER ASSEMBLY. Instead, replace PRNDM bezel only. NOTE 2: After replacing PRNDL Assembly, clear DTCs and check to confirm DTC does not return. Please return parts back.