WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Jaguar XE

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

413 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
SSM723072018-12-10. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM. The message "Radar Sensor Blocked" appears in instrument pack display. If blockage occurs while ACC is being used, ?Driver Intervene? and/or "Radar sensor blocked" message will appear on the cluster and DTC C1A67-97 is also set. Blockage can also occur when ACC is not being used.
SSM74008Attachme2018-12-10. Service bulletin. POWER TRAIN. Automatic transmission oil leaks (8HP45/75) resulting in transmission sump replacements.
SSM740082018-12-10. Service bulletin. POWER TRAIN. Automatic transmission oil leaks (8HP45/75) resulting in transmission sump replacements.
H142NAS12018-12-10. Service bulletin. ELECTRICAL SYSTEM. Potential issues have been identified on a limited number of Jaguar vehicles within the listed Affected Vehicle Range. The list of issues include the following: HMI stuck in installation for the entire drive cycle and there is no 'check for update' button shown within settings Comfort controller option is not available in the connectivity screen Installation failed pop-up should be removed for NGISOTA Voice command feature is unavailable in Mandarin, but other languages such as English, Cantonese, or Sichuanese are OK No response from HMI when 'check for update' is pressed and there is no connectivity HMI stuck in touchscreen throughout the cycle after abortive start-up NGI and TCU SOTA enable/disable option
NAS18-10-0182018-12-10. Service bulletin. ELECTRICAL SYSTEM. Potential issues have been identified on a limited number of Jaguar vehicles within the listed Affected Vehicle Range. The list of issues include the following: HMI stuck in installation for the entire drive cycle and there is no 'check for update' button shown within settings Comfort controller option is not available in the connectivity screen Installation failed pop-up should be removed for NGISOTA Voice command feature is unavailable in Mandarin, but other languages such as English, Cantonese, or Sichuanese are OK No response from HMI when 'check for update' is pressed and there is no connectivity HMI stuck in touchscreen throughout the cycle after abortive start-up NGI and TCU SOTA enable/disable option
SSM737132018-12-10. Service bulletin. SERVICE BRAKES, HYDRAULIC. A customer may report a squeal noise coming from front brakes during brake application. This will usually occur whilst cold.
SSM740922018-12-10. Service bulletin. POWER TRAIN. The customer reports reduced performance with P0191-85 observed in the PCM. This may or may not also illuminate the MIL. DTCs P168F-00, P2178-00, or P144C-00 may be stored also.
JTB00619NAS2.32018-11-13. Service bulletin. STRUCTURE:BODY:HOOD; LATCHES/LOCKS/LINKAGES:HOOD:LATCH. A 'Hood open' message may be displayed on the Instrument Cluster (IC) or the security system status indicator may give an audible warning to indicate that the hood is not latched correctly. Upon further inspection, the hood is correctly latched.
JTB00619NAS2.22018-11-13. Service bulletin. LATCHES/LOCKS/LINKAGES:HOOD:LATCH; STRUCTURE:BODY:HOOD. A 'Hood open' message may be displayed on the Instrument Cluster (IC) or the security system status indicator may give an audible warning to indicate that the hood is not latched correctly. Upon further inspection, the hood is correctly latched.
JTB00619NAS2.12018-11-13. Service bulletin. STRUCTURE:BODY:HOOD; LATCHES/LOCKS/LINKAGES:HOOD:LATCH. A 'Hood open' message may be displayed on the Instrument Cluster (IC) or the security system status indicator may give an audible warning to indicate that the hood is not latched correctly. Upon further inspection, the hood is correctly latched.
SSM740382018-11-13. Service bulletin. POWER TRAIN. Issue: A customer may report an oil leak under the vehicle from the transmission suspected to be the sump pan. Engineering would like to investigate the root cause as to these concerns
SSM724982018-11-13. Service bulletin. WHEELS. Issue: Wheel stud failures (fractures).
JTB00619NAS22018-11-13. Service bulletin. LATCHES/LOCKS/LINKAGES:HOOD:LATCH. The reissue replaces all previous version. Please destroy all previous versions.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.