WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Jaguar XE

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

413 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
SSM74160Attachme2019-01-07. Service bulletin. ELECTRICAL SYSTEM. A customer may raise a concern with the Malfunction Indicator Lamp Illuminated on the instrument cluster with no driveability concern. During interrogation DTC?s P054A-00, P0014-71, P000B-00 and/or P0341-00, P054A-00, P0303-00 and P0302-00 will be stored within the Powertrain Control Module (PCM).
SSM741602019-01-07. Service bulletin. ELECTRICAL SYSTEM. A customer may raise a concern with the Malfunction Indicator Lamp Illuminated on the instrument cluster with no driveability concern. During interrogation DTC?s P054A-00, P0014-71, P000B-00 and/or P0341-00, P054A-00, P0303-00 and P0302-00 will be stored within the Powertrain Control Module (PCM).
SSM737982019-01-07. Service bulletin. ELECTRICAL SYSTEM. Following a software update or an attempt to update the InControl Touch Pro system, one of the conditions listed below has been identified: 1. InControl Touch Pro system constantly restarting 2. Voice / Speech concern 3. Navigation concern 4. Live and Web Browser concern 5. System Language concern
SSM738742019-01-07. Service bulletin. ELECTRICAL SYSTEM. When carrying out the Pre Delivery Inspection routine using Pathfinder the e-call button may not illuminate and/ or ?SOS is not available? displayed on the instrument Cluster? due to activation failure.
SSM74179Attachme2019-01-07. Service bulletin. ELECTRICAL SYSTEM. Customer reports "Traction Reduced - 2 Wheel Drive Only? warning message displayed on the Instrument Cluster (IC). One or more of the DTC?s P1889-18, P1889-19, P1889-1F, P188E-11, P188E-12 and P188E-13 will be stored in the TCCM (Transfer Case Control Module).
SSM741712019-01-07. Service bulletin. ELECTRICAL SYSTEM. U1000-00 present in BCM. One or more BCM outputs not functioning. Examples include: Exterior lighting; Interior lighting (especially interior lights on X260, X760 or X761); Sun roof blinds; Steering Wheel Adjust; eco stop start.
SSM741322019-01-07. Service bulletin. ELECTRICAL SYSTEM. X260 / X760 left hand side of full TFT Instrument pack (IPC) goes blank when selecting "Polish" language from main menu.
SSM741312018-12-10. Service bulletin. ELECTRICAL SYSTEM. Jaguar Land Rover released Pathfinder 195 on 11th October and Symptom Driven Diagnostics (SDD) 154.05 on 8th October. As part of our continued efforts in increasing our customer experience, the release contains the latest InControl software containing significant improvements and enhancements to the system and its stability. Please refer to the latest release notes on TOPIx to understand the fixes that are included within this release. You are reminded that the InControl Touch Pro/ Duo Infotainment Master Controller (IMC) and ISC software should not be updated unless related to a reported customer concern.
SSM723072018-12-10. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM. The message "Radar Sensor Blocked" appears in instrument pack display. If blockage occurs while ACC is being used, ?Driver Intervene? and/or "Radar sensor blocked" message will appear on the cluster and DTC C1A67-97 is also set. Blockage can also occur when ACC is not being used.
H142NAS12018-12-10. Service bulletin. ELECTRICAL SYSTEM. Potential issues have been identified on a limited number of Jaguar vehicles within the listed Affected Vehicle Range. The list of issues include the following: HMI stuck in installation for the entire drive cycle and there is no 'check for update' button shown within settings Comfort controller option is not available in the connectivity screen Installation failed pop-up should be removed for NGISOTA Voice command feature is unavailable in Mandarin, but other languages such as English, Cantonese, or Sichuanese are OK No response from HMI when 'check for update' is pressed and there is no connectivity HMI stuck in touchscreen throughout the cycle after abortive start-up NGI and TCU SOTA enable/disable option
NAS18-10-0182018-12-10. Service bulletin. ELECTRICAL SYSTEM. Potential issues have been identified on a limited number of Jaguar vehicles within the listed Affected Vehicle Range. The list of issues include the following: HMI stuck in installation for the entire drive cycle and there is no 'check for update' button shown within settings Comfort controller option is not available in the connectivity screen Installation failed pop-up should be removed for NGISOTA Voice command feature is unavailable in Mandarin, but other languages such as English, Cantonese, or Sichuanese are OK No response from HMI when 'check for update' is pressed and there is no connectivity HMI stuck in touchscreen throughout the cycle after abortive start-up NGI and TCU SOTA enable/disable option

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.