# Recalls that may apply to the 2008 International 7500

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

## United States (NHTSA), as of 2026-10-19

- [08V089000](/recalls/nhtsa/08V089000.md), 2008-02-27: ENGINE AND ENGINE COOLING. INTERNATIONAL IS RECALLING 34,993 MY 2006\-2008 SCHOOL AND TRANSIT BUSES AND HEAVY DUTY TRUCKS/TRACTORS MANUFACTURED BETWEEN JUNE 1, 2006 AND JUNE 28, 2007, EQUIPPED WITH INTERNATIONAL DT466 OR DT570 ENGINES.  THE BASE PLATE OF THE ENGINE OIL COOLER MAY CRACK ALLOWING PRESSURIZED OIL TO LEAK INTO THE ENGINE COMPARTMENT. Built 2006\-06\-01 to 2007\-06\-28.
- [07V314000](/recalls/nhtsa/07V314000.md), 2007-07-24: PARKING BRAKE. ON CERTAIN 6X4 OR 6X6 TRUCKS WITH AIR BRAKES OR TRACTORS WITH AIR BRAKES AND EQUIPPED WITH BENDIX SR\-7 SPRING BRAKE MODULATING VALVES, THE INTERNAL RUBBER CHECK VALVE MAY LEAK CAUSING A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER THE OPERATOR PULLS THE DASH VALVE BUTTON. Built 2005\-11\-01 to 2007\-04\-30.
- [07V179000](/recalls/nhtsa/07V179000.md), 2007-04-24: SUSPENSION:REAR:AXLE:NON\-POWERED AXLE ASSEMBLY. ON CERTAIN TRUCKS, ONE OR BOTH REAR AXLE HOUSINGS MAY CONTAIN THINNER MATERIAL THAN WHAT IS NECESSARY FOR NORMAL VEHICLE OPERATION.  OVER TIME, THIS THINNER MATERIAL MAY RESULT IN A FATIGUE FAILURE OF THE REAR AXLE HOUSING, POSSIBLY IN THE LOCATION OF THE BRAKE FLANGE. Built 2006\-11\-15 to 2007\-02\-19.

## Canada (Transport Canada), as of 2026-10-19

- [2008068](/recalls/tc/2008068.md), 2008-02-27: Other. On certain vehicles, the engine oil cooler base plate may crack, allowing pressurized oil to leak into the engine compartment.  This may cause engine shut down without warning, and a risk of fire, which could result in property damage, personal injury, or death.  Correction: Dealers will replace the engine oil cooler.
- [2007246](/recalls/tc/2007246.md), 2007-07-20: Brakes. On certain vehicles, the internal rubber check valve inside the Bendix SR\-7 spring brake modulating valve can become deformed over time.  The effect of this defect is intermittent and presents a potential delay or failure in applying the parking brakes; potentially resulting in a vehicle roll away.  Should this occur, the unattended roll away vehicle could strike a bystander or cause property damage.  Correction: Dealers will install a check valve repair kit.

## Check a VIN

- [NHTSA recall lookup by VIN, United States](https://www.nhtsa.gov/recalls)
- [Transport Canada recall search, Canada](https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng)

Contains information licensed under the Open Government Licence – Canada.

JSON: [/v1/vehicles/2008_international_7500/recalls](/v1/vehicles/2008_international_7500/recalls)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%202008%20International%207500&page=https%3A%2F%2Fopen.wenmarpro.com%2Fmakes%2Finternational%2F7500%2F2008%2Frecalls&vehicle=2008%20International%207500)