# Recalls that may apply to the 2008 International 7300

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

## United States (NHTSA), as of 2026-10-19

- [14V037000](/recalls/nhtsa/14V037000.md), 2014-02-04: ELECTRICAL SYSTEM. Kaffenbarger Truck Equipment Company \(Kaffenbarger\) is recalling certain model year 2006\-2013 International class 8 trucks equipped with Sure Power\-brand DC\-DC converters containing a particular epoxy sealing, aka 'potting', compound.  The specific potting compound used in the subject products for insulation was found to be capable of conducting electricity after being exposed to heat. Built 2006\-01\-01 to 2013\-09\-30.
- [08V089000](/recalls/nhtsa/08V089000.md), 2008-02-27: ENGINE AND ENGINE COOLING. INTERNATIONAL IS RECALLING 34,993 MY 2006\-2008 SCHOOL AND TRANSIT BUSES AND HEAVY DUTY TRUCKS/TRACTORS MANUFACTURED BETWEEN JUNE 1, 2006 AND JUNE 28, 2007, EQUIPPED WITH INTERNATIONAL DT466 OR DT570 ENGINES.  THE BASE PLATE OF THE ENGINE OIL COOLER MAY CRACK ALLOWING PRESSURIZED OIL TO LEAK INTO THE ENGINE COMPARTMENT. Built 2006\-08\-01 to 2007\-06\-28.
- [07V179000](/recalls/nhtsa/07V179000.md), 2007-04-24: SUSPENSION:REAR:AXLE:NON\-POWERED AXLE ASSEMBLY. ON CERTAIN TRUCKS, ONE OR BOTH REAR AXLE HOUSINGS MAY CONTAIN THINNER MATERIAL THAN WHAT IS NECESSARY FOR NORMAL VEHICLE OPERATION.  OVER TIME, THIS THINNER MATERIAL MAY RESULT IN A FATIGUE FAILURE OF THE REAR AXLE HOUSING, POSSIBLY IN THE LOCATION OF THE BRAKE FLANGE. Built 2006\-11\-15 to 2007\-02\-19.

## Canada (Transport Canada), as of 2026-10-19

- [2008068](/recalls/tc/2008068.md), 2008-02-27: Other. On certain vehicles, the engine oil cooler base plate may crack, allowing pressurized oil to leak into the engine compartment.  This may cause engine shut down without warning, and a risk of fire, which could result in property damage, personal injury, or death.  Correction: Dealers will replace the engine oil cooler.
- [2007125](/recalls/tc/2007125.md), 2007-04-20: Other. On certain trucks, the rear drive axle housing was manufactured with steel below the specified thickness, which could result in fatigue failure over time.  If failure occurs, the outboard end of the housing could eventually separate, allowing the hub, axle shaft, and/or wheel and brake assembly to separate from the vehicle.  This could cause a vehicle crash with injury or death.  Correction: Dealers will inspect and, if required, replace the axle assembly.

## Check a VIN

- [NHTSA recall lookup by VIN, United States](https://www.nhtsa.gov/recalls)
- [Transport Canada recall search, Canada](https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng)

Contains information licensed under the Open Government Licence – Canada.

JSON: [/v1/vehicles/2008_international_7300/recalls](/v1/vehicles/2008_international_7300/recalls)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%202008%20International%207300&page=https%3A%2F%2Fopen.wenmarpro.com%2Fmakes%2Finternational%2F7300%2F2008%2Frecalls&vehicle=2008%20International%207300)