WenmarOpen by Wenmar Pro

Service bulletins for the 2020 Infiniti QX80

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

105 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
ITB19-024A2021-04-13. Service bulletin. ELECTRICAL SYSTEM. DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB17-056B2021-04-08. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY. INTELLIGENT KEY BATTERY DISCHARGED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB16-006A2021-04-08. Service bulletin. ELECTRICAL SYSTEM. INFINITI; FRONT SONAR PARKING SENSOR SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB19-042b2021-03-09. Service bulletin. ELECTRICAL SYSTEM. INFINITI; AV CONTROL UNIT REPLACEMENT PROCESS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB19-030a2021-03-09. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. AV CONTROL UNIT INFORMATION This bulletin has been amended. See AMENDMENT HISTORY, below. Discard all previous versions of this bulletin.
ITB20-023a2021-03-06. Service bulletin. ELECTRICAL SYSTEM; FORWARD COLLISION AVOIDANCE; EQUIPMENT. LANE CAMERA AIMING VEHICLE REFERENCE VALUES NOT IN ESM This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB20-021a2021-03-06. Service bulletin. ELECTRICAL SYSTEM. SOFTWARE UPDATE FOR INFOTAINMENT ISSUES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB20-026a2021-02-06. Service bulletin. ELECTRICAL SYSTEM. TELEMATICS CONTROL UNIT RESET AFTER AUTOMATIC COLLISION NOTIFICATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB19-029a2021-02-06. Service bulletin. ELECTRICAL SYSTEM. TELEMATICS (IVC) SERVICE INFORMATION See ITB12-011 for models built before those listed above for a different Service Procedure. SERVICE INFORMATION The Applied Vehicles are equipped with a wireless communication device called a Telematics Communication Unit (TCU). With an active Infiniti InTouch Services™ subscription the TCU communicates with the Infiniti Data Center to provide various security and convenience services. This bulletin contains important service procedures that must be performed properly in order to set-up and maintain the telematics system for the Applied Vehicles. • A table has been provided on the next page that lists the model and year-specific steps required to successfully configure a TCU after it has been replaced. • A check OFF sheet has been provided on page 11 to print and check off steps as they are performed. Please staple the completed Check OFF Sheet to the repair order.
ITB17-056a2021-02-06. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. INTELLIGENT KEY BATTERY DISCHARGED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB20-0262020-12-08. Service bulletin. ELECTRICAL SYSTEM; COMMUNICATION:MANUFACTURER TELEMATICS. TELEMATICS CONTROL UNIT RESET AFTER AUTOMATIC COLLISION NOTIFICATION SERVICE INFORMATION The Telematics Control Unit (TCU) has the ability to send an automatic collision notification when the vehicle is involved in an accident. Once an automatic collision notification is performed, the function becomes disabled. The TCU must be reset to re-enable the automatic collision notification function. This bulletin describes how to reset the TCU after an automatic collision notification has been performed.
ITB20-0232020-10-08. Service bulletin. ELECTRICAL SYSTEM; LANE DEPARTURE. LANE CAMERA AIMING VEHICLE REFERENCE VALUES NOT IN ESM SERVICE INFORMATION If the lane camera requires aiming, the values in Table A on page 4 must be used. • For all other models, consult the Electronic Service Manual (ESM). The following CONSULT-III plus (C-III plus) figures and steps are only provided to indicate where the VEHICLE REFERENCE VALUE from Table A is to be entered. The entire camera aiming procedure must be followed to complete the aiming procedure. • Refer to the Electronic ESM section: CRUISE CONTROL & DRIVER ASSISTANCE > DRIVER ASSISTANCE SYSTEM > DRIVER ASSISTANCE SYSTEM > BASIC INSPECTION > LANE CAMERA UNIT > CAMERA AIMING ADJUSTMENT. 1. Turn the ignition ON. 2. From the C-III plus home screen, select Diagnosis (One System).
ITB20-0212020-09-11. Service bulletin. ELECTRICAL SYSTEM. SOFTWARE UPDATE FOR INFOTAINMENT ISSUES SERVICE INFORMATION When diagnosing an infotainment issue, always confirm that the latest software is installed in the AV control unit before starting the diagnosis. The software update in the following Service Procedure is for the items below: • Stability improvements and “bug” fixes Refer to steps 1 - 4 to confirm that this bulletin applies. HINT: The software update only needs to be downloaded once and can then be used on multiple Applied Vehicles until other infotainment software is loaded onto the USB drive to overwrite the original data.
ITB20-0112020-04-07. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY. 2019-2020 QX80; WINDSHIELD WIPERS ACTIVATE DURING REMOTE ENGINE START USING PHONE APP IF YOU CONFIRM When using the INFINITI InTouch Services App to start the vehicle (Remote Engine Start), the windshield wipers are activated regardless of rain. ACTION 1. Replace the Body Control Module (BCM) with one listed in the PARTS INFORMATION on page 3. 2. Configure the BCM. 3. Perform the initialization procedure for NATS to relearn all of the customer’s Intelligent Keys. 4. Erase any stored DTCs.
ITB19-0422019-12-06. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM. INFINITI; AV CONTROL UNIT REPLACEMENT PROCESS IF YOU CONFIRM The AV control unit needs to be replaced on an APPLIED VEHICLE. ACTION 1. Read and save the VIN 2. Read and save the configuration 3. Replace the AV control unit 4. Reprogram the AV control unit 5. Configure the AV control unit 6. Write the VIN to the AV control unit IMPORTANT: Procedures 4-6 above must be performed in the order shown below.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.