# P34A5 on the 2018 Infiniti QX60

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

Nobody has written a description of this code yet.

## Bulletins for this model year that name P34A5

- [10149805](https://open.wenmarpro.com/bulletins/10149805), 2018-12-03: 2018 QX60; MIL ON WITH DTC P34A5 AND/OR P34A9 STORED This bulletin has been superseded. Please discard previous versions.
- [10136210](https://open.wenmarpro.com/bulletins/10136210), 2018-05-07: 2018 QX60; MIL ON WITH DTC P34A5 AND/OR P34A9 STORED This bulletin has been amended to correct the Applied Date. No other changes have been made. Please discard previous versions of this bulletin.
- [10130486](https://open.wenmarpro.com/bulletins/10130486), 2018-03-26: 2018 QX60; MIL ON WITH DTC P34A5 AND/OR P34A9 STORED IF YOU CONFIRM MIL is ON with one or both of the following DTCs: \-P34A5 \(A camshaft posi actuator temp sens B1\) \-P34A9 \(A camshaft posi actuator temp sens B2\) And Outside ambient temperature was near or below freezing \(32°F\) when the DTCs were stored. NOTE: If any VTC DTCs other than P34A5 and/or P34A9 are also stored \(example: P0011, P0021\), those DTCs should be diagnosed and resolved first. ACTION Replace the electric intake valve timing control module \(see Figure 1 on Page 2\). \-Electric intake valve timing control module is listed in the Parts Information of this bulletin. \-Refer to the Electronic Service Manual \(ESM\), section ENGINE \> ENGINE CONTROL SYSTEM, for replacement information. \-Make sure to perform Electric IVT Control Actuator Position Learning after replacement of the module.