WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Hyundai Kona

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

122 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
20-BD-002H2020-03-06. Service bulletin. ELECTRICAL SYSTEM. This bulletin describes the procedure to repair certain Kona Electric (OS EV) vehicles which may experience difficulty with opening the charging door.
20-AT-001H2020-02-03. Service bulletin. POWER TRAIN. This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
20-ST-001H2020-02-03. Service bulletin. STEERING. This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
20-BE-001H2020-02-03. Service bulletin. ELECTRICAL SYSTEM. This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port.
19-01-042H2020-01-21. Service bulletin. EQUIPMENT. This bulletin provides information and procedures for collecting OBD ?In Use Monitor Performance Ratio? (IUMPR) data on certain 2019-2020MY vehicles at California dealers. This reporting is mandated by CARB (California Air Resources Board). Data is no longer submitted to Hyundai by datasheet and dealer email. Data is sent electronically by GDS when the procedure of this bulletin is followed.
19-AT-021H-12020-01-21. Service bulletin. POWER TRAIN; EQUIPMENT. If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. ? PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). ? FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission.
19-AT-024H2019-12-16. Service bulletin. ELECTRICAL SYSTEM. If you are servicing a vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. ? Diagnostic trouble codes: ?P0705 - Range switch sensor circuit ?P0706 - Range switch range/performance ?P0707 - Range switch - open circuit ?P0708 - Range switch - short circuit or multiple inputs ? Symptoms: ?Malfunction Indicator Light (MIL) illuminated ?4th gear fail-safe ?No gear indication in cluster ?Intermittent no engine crank/no start in ?P? or ?N? with or without MIL or DTC.
Campaign T4G Dea2019-12-16. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM. Hyundai is conducting a Service Campaign to inspect the Electric Water Pump (EWP) assembly.
19-01-036H2019-12-16. Service bulletin. ELECTRICAL SYSTEM. Certain vehicles may incur dash warning light(s) On with DTC(s) stored including either of the following DTC: ? U1116 - Lost Communication With Motor Electronics Coolant Pump (C-CAN) ? U1118 - Lost Communication With Hybrid/EV Battery Electronic Coolant Pump (P-CAN) The vehicle may operate in limp home at a reduced power. The above DTC(s) may occur due to coolant leaking into the Electric Water Pump (EWP) Can Case and may have an intermittent electrical connection. This bulletin provides instructions to inspect the vehicle?s EWP assembly. The Can Case of the EWP or the full EWP Assembly will be replaced depending on the EWP inspection result. The EWP?s connector may also need to be replaced with a wiring harness kit if contamination is confirmed. Perform the inspection procedure as outlined on page-7.
19-BE-011H-12019-12-16. Service bulletin. LANE DEPARTURE; BACK OVER PREVENTION. The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to enter the lane where another vehicle is driving.
19-GI-006H2019-11-06. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.
19-AT-016H2019-09-30. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT ADAPTIVE/MOBILITY. If you are servicing an applicable vehicle with a ?Check Engine? light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness.
19-EE-001H-12019-08-19. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. This bulletin provides information on how to return a Hyundai HEV/PHEV/EV/Fuel Cell Lithium Battery for proper disposal and safe environmental recycling using Hyundai?s authorized vendor Kinsbursky Brothers Intl. (KBI).
19-AT-012H2019-07-29. Service bulletin. POWER TRAIN. This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
19-AT-010H2019-07-01. Service bulletin. POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. This bulletin provides a procedure to transfer pressure data to the ECU/TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality.
19-EE-002H2019-05-20. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. The following summarizes the service procedure for EV battery replacement:
19-ST-001H2019-05-20. Service bulletin. STEERING. This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
19-HA-001H2019-05-20. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE. This bulletin provides additional service diagnostic information and repair procedures related to electric A/C compressors equipped in hybrid electric vehicles, plug-in hybrid electric vehicles, and electric vehicles.
19-FL-003H2019-05-20. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.
19-BE-004H2019-04-22. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES; VISIBILITY. This bulletin provides information on the serviceable parts for the outside mirror assembly. When diagnosing and repairing the outside mirror, do not replace the entire assembly. Refer to page 2 of this TSB for replacement of individual parts.
19-BE-003H2019-03-18. Service bulletin. ELECTRICAL SYSTEM. Some vehicles equipped with the wireless charging pad may experience a no charging condition. This bulletin provides information of how to diagnose the no charging condition.
5NP-M7Z5K-022019-02-19. Service bulletin. ELECTRICAL SYSTEM. This bulletin provides information on how to return a Hyundai HEV/PHEV/EV/Fuel Cell Lithium Battery for proper disposal and safe environmental recycling using Hyundai?s authorized vendor Kinsbursky Brothers Inc. (KBI).

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.