Service bulletins for the 2016 GMC Yukon
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
1848 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| PIT5576C | 2019-10-15. Service bulletin. STRUCTURE. This Preliminary information communicates and issue with the hood ajar message being displayed when the hood is not ajar. Inspect the body ground strap to insure it is connected in the proper locations and the strap eyelets are tight and do not rotate. |
|---|---|
| PIP4670H | 2019-10-15. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles. |
| PIP5678 | 2019-10-15. Service bulletin. POWER TRAIN. This Preliminary information communicates to the dealer technician that if they are unable to perform the solenoid characterization using the transmission unit number (TUN) off a replacement 8L90 RPO M5U automatic transmission to refer to the TUNs listed in this PI. If the TUN off the replacement transmission is listed they should refer to bulletin 18-NA-355 and perform a transmission fluid exchange due to possible fluid contamination. The dealer technician is to call technical assistance after the fluid exchange to get the TUN unlocked so they will then be able to complete solenoid valve characterization procedure. |
| PIP5632B | 2019-10-15. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question. |
| PIT3099S | 2019-10-15. Service bulletin. EQUIPMENT:ELECTRICAL. This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact PARTECH and/or the Techline Customer Support Center for additional support. |
| PIT5448F | 2019-10-15. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication advises the technician with a tip when the vehicle stops running after it has been idling for 2.5 hours. This is normal operation of the vehicle built with regular production code BTM and without Regular Production Option Code AVF. If the vehicle was built with regular production code BTM and AVF only has a 1 hour idle time. |
| PIT5481E | 2019-10-15. Service bulletin. STEERING. This Preliminary Information communication provides information to the technician with additional information on the functionality of Lane Keep Assist. Starting with 2016 model year Lane Keep Assist Regular Production Option Code (UHX) replaced Lane Departure Warning Regular Production Option Code (UFL). Lane Keep Assist is designed to assist the driver in keeping the vehicle from drifting out of a driving lane that has clearly identified markings. The electric power steering provides a gentle steering correction if a lane marking has been crossed and the driver has not actively responded. |
| PIE0529 | 2019-09-23. Service bulletin. POWER TRAIN. This engineering information bulletin is requesting information from the field to validate a field fix. Before contacting engineers, remove the transmission oil pan and inspect for nickel to quarter size pieces of aluminum debris in the oil pan. The 2-3-4-6-8 and 4-5-6-7-8 reverse clutch assembly and the 1-3-5-6-7 clutch assembly may be broken in several pieces. |
| PI0592E | 2019-09-23. Service bulletin. ELECTRICAL SYSTEM. This preliminary information bulletin provides information om Service Programming System (SPS) Error Codes E4398, E4399, E4403, M4404, M4413, E4414, E4423, E4491 or E6961). |
| 130089008B | 2019-09-23. Service bulletin. EQUIPMENT. This bulleting provides Wiring, Terminal and Connector Repair Information including how to determine the Service Part Number in eSI and how to locate the part(s) in the EPC. |
| 090604026R | 2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2. |
| 080730026F | 2019-09-23. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped. |
| 070601016F | 2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement. |
| 000601026M | 2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage. |
| 19NA153 | 2019-09-23. Service bulletin. POWER TRAIN. This technical bulletin provides a procedure to replace the torque converter and inspect the front pump and the TEHCM for metal. |
| 18NA146 | 2019-09-23. Service bulletin. EQUIPMENT. This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only). |
| 16NA109 | 2019-09-23. Service bulletin. STEERING. This technical bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear. |
| 16NA042 | 2019-09-23. Service bulletin. ELECTRICAL SYSTEM. This Technical Bulletin provides procedures to upgrade a vehicle with the Android Auto feature for 2016 and 2017 Model Year vehicles. |
| PIP5407A | 2019-09-16. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have Diagnostic Trouble Code P06DD or no or low oil pressure. Technician will replace timing chain tensioner guide. If oil pump face is damaged and or worn thru replace oil pump. Inspect bearings for damage wear due to debris from oil pump. |
| PIT5288G | 2019-09-16. Service bulletin. STEERING; VISIBILITY; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that may have any of these concerns remote keyless entry, passive Entry and Start Inoperative, No Fob detect message on driver information center, service tire pressure system, no audio, touch screen Inoperative, Steering Wheel Controls Inoperative, Service Stabilitrak, rear power windows inoperative, rear wiper inoperative, and or a dead battery. Technician may find Diagnostic Trouble Codes B3101, B144C, C0710, C0544, U1548, U1549, U154A, U0151, U0126, U0415, U0077, U0028 and/or U0029. Technician should inspect the left instrument panel for the wire harness being pinched. Technician will need to repair the wire harness and reroute the wire harness. |
| PIT5572C | 2019-09-16. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. This Preliminary information communicates a Service Adaptive Cruise With DTC C018C SYM3A After Replacing K14 Distance Sensing Cruise Control Module and provides tips for completing all necessary steps and to contact TCSC if configuration does not complete correctly. |
| PIC6086F | 2019-09-16. Service bulletin. VISIBILITY. This Preliminary Information communication provides the technician with steps to resolve the issue of an oily substance that may be found on the inside windshield surface, and appears to be leaking from the rear view mirror area. Technician will remove the moisture sensor and clean the glass and mounting bracket with alcohol wipe. If the gel separates from the sensor the sensor will need to be replaced. |
| 19NA153 | 2019-08-26. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This technical bulletin provides a procedure to replace the torque converter and inspect the front pump and the TEHCM for metal. |
| 19NA142 | 2019-08-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; POWER TRAIN. This technical bulletin provides information for new transmission oil to use, a procedure for exchanging the old fluid and adding the new fluid to a service transmission. |
| 19NA137 | 2019-08-26. Service bulletin. PARKING BRAKE:CONVENTIONAL:MECHANICAL:LINKAGE AND CABLE; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. This technical bulletin provides a procedure to add PET tape to the brake cables if the cause of the customers concern. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.