WenmarOpen by Wenmar Pro

Service bulletins for the 2022 GMC Sierra

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1773 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
18-NA-0112022-10-07. Service bulletin. ENGINE AND ENGINE COOLING. Informational bulletin explaining how a plow may cause overheating and engine damage when traveling over 45 mph.
17-NA-3742022-10-07. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin advises the technician of how the Soot information has changed from grams to percentage.
16-NA-3762022-10-07. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on higher than expected oil consumption.
16-NA-3722022-10-07. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides information on common diesel engine tick noises and how they are considered part of normal operation and no parts should be replaced for these normal operating conditions.
16-NA-2222022-10-07. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
00-06-01-026P2022-09-30. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
PIE0665B2022-09-19. Service bulletin. ENGINE AND ENGINE COOLING. This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to Service Engine Soon (SES) Lamp illuminated and/or “Service Emissions System” message on the Driver Information Center (DIC).
22-NA-1762022-09-19. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This technical bulletin provides information on a possible bolt and guide pin that may be missing from the control valve which will need to be installed to correct the repair.
PIE0698A2022-09-08. Service bulletin. ENGINE AND ENGINE COOLING. This engineering information (EI) closure ends the need for further information from the field in regards to oil leaking from the oil pan.
PIE06982022-09-07. Service bulletin. ENGINE AND ENGINE COOLING. This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to oil leaking from the oil pan.
03-06-01-023F2022-09-07. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
20-NA-0652022-09-07. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of MIL Illuminated with Multiple Fuel Trim and/or Oxygen Sensor Codes Set.
22-NA-1682022-08-30. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides diagnostic information when checking the exhaust system for leaks.
19-NA-0442022-08-29. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE. This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
22-NA-1502022-08-19. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, DIESEL. This technical bulletin provides a procedure to program the Reductant Control Module and Setup and Perform the Reductant Fluid Tank Level Reset.
22-NA-0872022-08-16. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. This technical bulletin provides a procedure to replace the fuel injector and the wiring harness to correct a customer concern of Malfunction Indicator Lamp (MIL) Illuminated with DTC P0201, P0202, P0203, P0204, P0205, P0206 and/or P0216 Set.
PIP58612022-08-15. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates that a vehicle may exhibit a misfire condition resulting in misfire codes P0300-P0308. Upon diagnosis it may be discovered the lifter has come apart. It is recommended to replace the lifter guide and the four lifters.
PIT5926A2022-08-15. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE. This Preliminary information communicates information on correcting a rattle noise from the underbody exhaust heat shield.
N2223675112022-08-05. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. Certain vehicles equipped with Accessory Exhaust Upgrade, (RPO WBC), may cause damage to the rear fascia. Dealers will inspect the exhaust and replace if necessary. The rear fascia, parking sensor and wiring will be replaced, if damaged.
22-NA-0802022-08-03. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR. This technical bulletin provides a procedure to replace the camshaft actuator magnet to correct customer concerns of engine related shudder.
22-NA-0152022-08-03. Service bulletin. FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM; ENGINE AND ENGINE COOLING; POWER TRAIN. This informational bulletin provides graphs to help identify possible issues that may cause shaking and shudders and what may be the cause of said issue.
PIT59262022-07-25. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. This Preliminary information communicates information on correcting a rattle noise from the underbody exhaust heat shield
PIP5212D2022-07-25. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about vehicles that have run hot and or has a tick noise. Technician should inspect the head gaskets to ensure are not installed backwards. Technician should replace the head gasket if they are found installed backwards.
PIT5448H2022-07-25. Service bulletin. ENGINE. This Preliminary Information communication advises the technician with a tip when the vehicle stops running after it has been idling for 2.5 hours. This is normal operation of the vehicle built with regular production code BTM and without Regular Production Option Code AVF. If the vehicle was built with regular production code BTM and AVF only has a 1 hour idle time.
19-NA-2182022-07-20. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides a service procedure to correct a condition of a Ticking Noise from the Engine.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.