WenmarOpen by Wenmar Pro

Service bulletins for the 2021 GMC Sierra

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1649 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
20NA1972022-05-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); BACK OVER PREVENTION; SERVICE BRAKES, HYDRAULIC. This technical bulletin provides a procedure to inspect and repair the fuel pressure sensor if found the cause of the customers concern.
20NA1662022-05-31. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS. This informational bulletin advises the technician of possible coolant entering the areas of the engine, either through failed parts or defects in the castings, that may be the cause of the concerns related to the MIL or the engine running rough.
19NA2182022-05-31. Service bulletin. ENGINE; EQUIPMENT ADAPTIVE/MOBILITY. This service bulletin provides a service procedure to correct a condition of a Ticking Noise from the Engine.
22-NA-0872022-05-18. Service bulletin. FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS; ENGINE. This technical bulletin provides a procedure to replace the fuel injector and the wiring harness to correct a customer concern of Malfunction Indicator Lamp (MIL) Illuminated with DTC P0201, P0202, P0203, P0204, P0205, P0206 and/or P0216 Set.
PIP5776G2022-05-16. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates that a vehicle may exhibit a misfire condition resulting in misfire codes P0300-P308. Upon diagnosis it may be discovered the lifter has come apart. It is recommended to replace the lifter guide and the four lifters.
PIP58472022-05-16. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE. This Preliminary information communicates the possibility of a misfire or rough running concern and abnormal engine noise due to excessive wear in exhaust roller follower axle pin.
12-00-89-003B2022-05-10. Service bulletin. EQUIPMENT:ELECTRICAL; ENGINE. This service bulletin provides policy information on warranty administration guidelines for multiple repairs with independent causes (GM Canada Dealers Only).
PIE06932022-05-06. Service bulletin. ENGINE AND ENGINE COOLING. This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to Oil Leaking from Front of Engine.
03-06-01-023E2022-05-06. Service bulletin. ENGINE AND ENGINE COOLING. This information bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
22-NA-0802022-05-03. Service bulletin. ENGINE AND ENGINE COOLING. This technical bulletin provides a procedure to replace the camshaft actuator magnet to correct customer concerns of engine related shudder.
22-NA-0822022-04-30. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. This technical bulletin provides repair information to correct a customer concern of Malfunction Indicator Lamp Illuminated with DTC P06DD, P2B60, P26BB, P1098 Set.
PIP58452022-04-18. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This Preliminary information communicates to the dealer technician that if the vehicle's engine coolant reservoir has transmission fluid in it or if Glycol it found in the transmission fluid the dealer should replace the Automatic Transmission Fluid Cooling Exchanger. The dealer should refer to bulletin 08-07-30-035 for the recommended components that should be replaced in the transmission and to flush the engine cooling system following service information.
PIP58442022-04-18. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE. This Preliminary information communicates the possibility of dtc p06DD due to low or no oil pressure immediately following engine oil and filter change due to oil filter and main oil gallery being drained or empty.
PIP5838A2022-04-18. Service bulletin. ENGINE; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. This Preliminary information communicates to the dealership technician a change made to the wire harness and reductant control module for the Diesel Exhaust Fluid tank connector.
PIE0676A2022-04-06. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This engineering information (EI) closure ends the need for further information from the field in regards to Engine Coolant Reservoir Being Overfilled with Discolored Coolant, Shudder, Shake, Vibration, Harsh Shift, Delayed Shift and/or Slipping Transmission Performance.
22-NA-0742022-04-06. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
19-NA-2182022-04-05. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides a service procedure to correct a condition of a Ticking Noise from the Engine.
PIE06852022-04-05. Service bulletin. ENGINE AND ENGINE COOLING. This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to oil leaking from the lower oil pan seal area.
22-NA-0152022-04-05. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. This informational bulletin provides graphs to help identify possible issues that may cause shaking and shudders and what may be the cause of said issue.
22-NA-0092022-04-05. Service bulletin. ENGINE AND ENGINE COOLING. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
22-NA-0472022-03-18. Service bulletin. ENGINE AND ENGINE COOLING. Information bulletin explains a possible coolant leak coming from the cylinder head bolt areas.
PIP58402022-03-14. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR. This Preliminary information communicates to technicians to modify the camshaft housing cover insulator by removing the stand off identified in the attached pictures.
PIP5808A2022-02-14. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates to technicians to replace the ECM and affected sensor if diagnostics leads to replacement of the ECM.
PIP5791A2022-02-14. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates to dealership technicians to perform a sweep of the coolant flow control valve and test the circuits before replacing the Engine Coolant Flow Control Valve, and to assist engineering in root causing the P2B60.
PIT5479E2022-02-14. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician about fluid leaking from the brake caliper piston area found during a service of the vehicle. The substance is actually excess assembly grease from the caliper boot and piston installation. This grease can be cleaned off and the rest of the service completed.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.