WenmarOpen by Wenmar Pro

Service bulletins for the 2020 GMC Sierra

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1990 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
PIP5664B2019-10-15. Service bulletin. ELECTRICAL SYSTEM. This Preliminary information communicates to the dealer technician to check for any new ECM calibration updates for DTCs P129F P16F3 P20EE P20FF P226D P249D P249E P11CC and / or P11D5 set.
PIP4670H2019-10-15. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles.
PIP5606E2019-10-15. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary information communicates A vehicle may have a tick noise from the engine cold, initial start in the morning. A lifter may not have sufficient amount of oil during cold start operation (not pumped up). As information comes in the Pi will be updated and when the final repair is out this this PI will be changed to a Bulletin
PIP56772019-10-15. Service bulletin. POWER TRAIN. This Preliminary information communicates to the dealer technician that the 10L60, 10L80 and the 10L90 transmissions have been place on a part restriction. Dealers are to contact the Product Quality Center before replacing the transmission assembly.
PIT57112019-10-15. Service bulletin. ELECTRICAL SYSTEM. This Preliminary information communicates information for the dealer to reprogram the IPC to correct the Off-Road Mode not being able to be selected using the Driver Mode Control Switch.
PIP5646B2019-10-15. Service bulletin. WHEELS. This Preliminary information communicates to the dealer technician that some customers may comment the rear wheels locked up at low speeds after a hot soak. Technicians may find DTC's P2724, P2727 or P2729 set. Technician's are advised to replace the TCM to address this concern.
PIT57092019-10-15. Service bulletin. STRUCTURE:BODY. This Preliminary information communicates the need for proper documentation when submitting a Field Product Report on paint issues with the new 2020 HD Silverado and Sierra.
PIP56752019-10-15. Service bulletin. ELECTRICAL SYSTEM. This Preliminary information communicates to the dealer that a customer may comment that the MIL light is illuminated. The technician may find P1098 and/or P26BB set current or history. That this may be caused by a software anomaly, and that GM is currently looking into the issue. It provides testing and related direction based on the results.
PIT57072019-10-15. Service bulletin. SERVICE BRAKES, AIR:ANTILOCK:WHEEL SPEED SENSOR. This Preliminary information communication provides information to the dealer about vehicles with the ABS light or Service Stability Message displayed with C050A or C0504 DTC's set. Dealer may find manufacturing debris on the wheel speed sensor reluctor wheel causing this concern. Dealer is to clean the debris from the reluctor wheel and evaluate for concern.
PIP5656B2019-10-15. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication advises the technician that the 6.6L Engine (RPO L8T) has been placed on Engine Exchange program and crankshaft has been placed on part ordering restriction. Dealer will need to contact General Motors Product Quality Center for further assistance.
PIP5656A2019-10-15. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication advises the technician that the 6.6L Engine (RPO L8T) has been placed on Engine Exchange program. Dealer will need to contact General Motors Product Quality Center for further assistance.
PIP5637C2019-10-15. Service bulletin. ENGINE AND ENGINE COOLING. The Preliminary Information communication advises the technician that the Product Quality Center has a part exchange for 3.0 LM2 engine. The dealer technician is advised to call the GM Product Quality Center for further assistance.
PIT5448F2019-10-15. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication advises the technician with a tip when the vehicle stops running after it has been idling for 2.5 hours. This is normal operation of the vehicle built with regular production code BTM and without Regular Production Option Code AVF. If the vehicle was built with regular production code BTM and AVF only has a 1 hour idle time.
PIT5551E2019-10-15. Service bulletin. FORWARD COLLISION AVOIDANCE. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert".
PIT5481E2019-10-15. Service bulletin. STEERING. This Preliminary Information communication provides information to the technician with additional information on the functionality of Lane Keep Assist. Starting with 2016 model year Lane Keep Assist Regular Production Option Code (UHX) replaced Lane Departure Warning Regular Production Option Code (UFL). Lane Keep Assist is designed to assist the driver in keeping the vehicle from drifting out of a driving lane that has clearly identified markings. The electric power steering provides a gentle steering correction if a lane marking has been crossed and the driver has not actively responded.
PIP56732019-10-15. Service bulletin. ELECTRICAL SYSTEM. This Preliminary information communicates advises the technician that the ECM part number will be placed on a parts restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
PIP5664A2019-10-15. Service bulletin. EQUIPMENT:ELECTRICAL. This Preliminary information communicates to the dealer technician the procedures for DTC P11CC, P11D5, P226D, P249E, P249D, P20EE or P226D while engineering is investigating.
PIE05322019-09-23. Service bulletin. VISIBILITY. This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to gathering information for the power outside folding mirror with the conditions of having shakes, clicking and/or noisy while folding or loose between the mirror head and mirror base.
PI0592E2019-09-23. Service bulletin. ELECTRICAL SYSTEM. This preliminary information bulletin provides information om Service Programming System (SPS) Error Codes E4398, E4399, E4403, M4404, M4413, E4414, E4423, E4491 or E6961).
130089008B2019-09-23. Service bulletin. EQUIPMENT. This bulleting provides Wiring, Terminal and Connector Repair Information including how to determine the Service Part Number in eSI and how to locate the part(s) in the EPC.
100310001E2019-09-23. Service bulletin. WHEELS. This informational bulletin provides information on Wheel Balancer Mounting Instructions.
090604026R2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
080730026F2019-09-23. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
070601016F2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
000601026M2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.