WenmarOpen by Wenmar Pro

Service bulletins for the 2020 GMC Sierra

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1990 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Backup camera are shown. Show all

Bulletins, newest first
PIT59142022-06-13. Service bulletin. BACK OVER PREVENTION:DISPLAY FUNCTION; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary information communicates a concern on some 2020 Silverado and Sierra trucks where the radio display will go blank when trying to open the trailering app. Engineerng has root caused the issue, and is working on a software fix.
PIT5809C2022-06-13. Service bulletin. BACK OVER PREVENTION; STEERING. This Preliminary information communicates an issues with a pop, clunk, knock, rattle type noise heard from the steering column over bumps and ask dealerships to replace the upper column shaft.
PIE0664A2022-06-13. Service bulletin. BACK OVER PREVENTION; AIR BAGS. This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the Blocked Park Assist Sensor message illuminated on the driver information center (DIC).
070601016G2022-06-13. Service bulletin. BACK OVER PREVENTION. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
20NA1972022-05-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); BACK OVER PREVENTION; SERVICE BRAKES, HYDRAULIC. This technical bulletin provides a procedure to inspect and repair the fuel pressure sensor if found the cause of the customers concern.
PIT5386G2022-02-14. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in.
PIT5744B2022-02-14. Service bulletin. VISIBILITY; BACK OVER PREVENTION. This Preliminary information communicates information on how to disable the Side Blind Zone Detection and Park Assist systems when a customer removes the pickup box from the vehicle to install an aftermarket bed or body.
PIT5697B2022-02-14. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION: CAMERA SYSTEM. This Preliminary information communication provides information to the technician on installing Regular Production Option Code UVC Rearview Camera. Technician will need to reference the latest version of General Motors Up-fitter Integration Bulletin 152. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins."
21NA0912021-12-27. Service bulletin. BACK OVER PREVENTION; EQUIPMENT. This service bulletin provides information for customers/dealers/technicians on Normal Rearview Camera Display Operation - Flashing Diamond - Spot - or UFO like image on Rear View Camera Display.
20NA1882021-12-27. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. This technical bulletin provides repair information to correct a customer concern of Rear View Camera Image Flickers When Brake Lamps or Turn Signals are On.
19NA1292021-12-20. Service bulletin. BACK OVER PREVENTION. This technical bulletin provides repair information to correct a customer concern of a squeak and/or clunking noise coming from the rear of the vehicle.
PIP5806A2021-09-13. Service bulletin. BACK OVER PREVENTION; WHEELS. This preliminary information bulletin instructs to technicians to use the Picoscope or a make physical inspection to check for debris on the cam postion sensor and to check for a bent target wheel on the camshaft.
PIT5666C2021-09-13. Service bulletin. BACK OVER PREVENTION. This Preliminary information communicates an issue with a noise caused by the engine harness rubbing on the floor pan. Dealers are to reposition the harness to fix the noise.
PIP58082021-09-13. Service bulletin. BACK OVER PREVENTION. This Preliminary information communicates to technicians to replace the ECM and affected sensor if diagnostics leads to replacement of the ECM.
PIP5752M2021-09-13. Service bulletin. BACK OVER PREVENTION. This Preliminary information communicates A Vehicle may have a concern of service engine light, misfire and engine noise with possible of DTC P0300 P0106 P0506, Possible valve spring concern
21NA1362021-08-09. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; BACK OVER PREVENTION. This technical bulletin provides repair information to correct a customer concern of Crooked Rear View Camera Guideline Image on Radio Display.
21NA0912021-07-19. Service bulletin. BACK OVER PREVENTION. This service bulletin provides information for customers/dealers/technicians on Normal Rearview Camera Display Operation - Flashing Diamond - Spot - or UFO like image on Rear View Camera Display.
21NA0912021-07-06. Service bulletin. BACK OVER PREVENTION. This service bulletin provides information for customers/dealers/technicians on Normal Rearview Camera Display Operation - Flashing Diamond - Spot - or UFO like image on Rear View Camera Display.
19NA1292021-07-06. Service bulletin. BACK OVER PREVENTION. This technical bulletin provides repair information to correct a customer concern of a squeak and/or clunking noise coming from the rear of the vehicle.
19NA0762021-07-06. Service bulletin. BACK OVER PREVENTION. This service bulletin provides repair information to correct a customer concern of Blue or Black Screen and Service Rear Vision System Message on Radio Display Shifting into Reverse.
20NA1882021-05-24. Service bulletin. BACK OVER PREVENTION. This technical bulletin provides repair information to correct a customer concern of Rear View Camera Image Flickers When Brake Lamps or Turn Signals are On.
20NA0482021-05-24. Service bulletin. BACK OVER PREVENTION; AIR BAGS. This technical bulletin provides repair information to correct a customer concern of hearing a rattle noise from driver or passenger seat belt.
PIP5653K2021-05-17. Service bulletin. BACK OVER PREVENTION. This Preliminary information communicates that engineering is investigating a repair for a chirp noise associated with the front axle assembly.
PIT5674B2021-05-17. Service bulletin. BACK OVER PREVENTION; SERVICE BRAKES; LANE DEPARTURE. This Preliminary information communicates that after installation of GM Accessory Performance Brake Pads it may be noticed the EBCM has set DTC(s) C116C 05 and/or C116B 05. There will be NO warning lights or messages displayed on the IPC/DIC. The GM Accessory Performance Brake Pads do not utilize the brake pad wear sensor. None. These DTC(s) do not cause any warning lights or messages to be displayed in the IPC/DIC. Per the GM Accessory Performance Brake installation instructions, the brake pad sensor connector should be capped with the supplied cap and the brake pad life system disabled in the DIC.
PIT5666B2021-05-17. Service bulletin. BACK OVER PREVENTION. This Preliminary information communicates an issue with a noise caused by the engine harness rubbing on the floor pan. Dealers are to reposition the harness to fix the noise.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.