Service bulletins for the 2017 GMC Canyon
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
1478 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Engine are shown. Show all
| PIP5540E | 2019-11-12. Service bulletin. ENGINE. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance. |
|---|---|
| PIE0540 | 2019-10-28. Service bulletin. ENGINE AND ENGINE COOLING. This engineering informational bulletin is requesting to gather information from the field to determine a root cause for a condition of oil leaking from the valve rocker arm oil control valve. The information gathered will be used to develop a field fix. |
| 17NA352 | 2019-10-28. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin explains how the SOOT readings went from grams to percentage. 2-1-18 Change Subject to reflect the test procedure. 5-1-18 Updated the Information section. |
| 17NA222 | 2019-10-28. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. This technical bulletin provides a procedure to replace the turbocharger for vehicles with a condition of Turbocharger Whine Noise due to the blades on the turbo being bent. |
| 17NA194 | 2019-10-28. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin advises the technician to test the induction system for leaks for any of the codes listed. |
| 17NA114 | 2019-10-28. Service bulletin. ENGINE AND ENGINE COOLING. This technical bulletin provides a procedure to Tighten the Charge Air Cooler Duct Clamp to correct a condition of an oil leak originating from either the inlet or outlet duct of the turbocharger due to the charge air cooler pipe clamp not being tightened properly. |
| 090604026R | 2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2. |
| 070601016F | 2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement. |
| 000601026M | 2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. This informational bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage. |
| 16NA380 | 2019-09-23. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE. This informational bulletin provides a procedure on how to perform a quick test to check if the DPF is the cause of excessive soot from the tailpipe. |
| 19NA150 | 2019-08-26. Service bulletin. ELECTRICAL SYSTEM; ENGINE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin advises the tech that intake camshaft actuator solenoid bank and the intake actuator park lock solenoid have the same electrical connector and may be swapped causing the concern. |
| 17NA134 | 2019-08-19. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE. This informational bulletin explains how to check the NOx Catalyst Reductant-Load Adaptive Values using GSD2. |
| 16NA017 | 2019-08-19. Service bulletin. ENGINE; POWER TRAIN. This informational bulletin provides information ticking noise and/or noise when turning vehicle off. |
| 090604026Q | 2019-07-29. Service bulletin. ENGINE; EQUIPMENT. This informational bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2. |
| 19NA104 | 2019-07-29. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY. This informational bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area. |
| 19NA007 | 2019-07-29. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY. This technical bulletin provides a procedure to replace the surge tank if found the cause of the customers concern. |
| 16NA383 | 2019-07-01. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. This informational bulletin advises of a new fuel injection kit used for decarbonizing the intake valves, and explains how toptier fuels should be used to reduce carbon build up. |
| 16NA380 | 2019-07-01. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE. This informational bulletin provides a procedure on how to perform a quick test to check if the DPF is the cause of excessive soot from the tailpipe. |
| PIT5688 | 2019-06-10. Service bulletin. ENGINE; ENGINE AND ENGINE COOLING. This preliminary information was released to advise of an alternate means of purging the air from the cooling system. |
| PIT5363E | 2019-06-10. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE. This Preliminary Information communication provides information to the technician about vehicles that may have a click or tick noise heard inside cab with engine running. Technician may find the engine or High Pressure Fuel Pump tick noise that is very loud in the cab of the truck. Comparison with another truck having the same powertrain could show the other truck is quieter. Technician will install an acoustic seal that may be missing or dislodged. Update extends to all engines and all model years. |
| PIP5640 | 2019-06-10. Service bulletin. ENGINE. This Preliminary Information communication provides information to the technician to not remove the torque converter bolts and start the engine as this may cause damage to the torque converter of the crankshaft on vehicles equipped with an automatic transmission. |
| PIP5226C | 2019-06-10. Service bulletin. EQUIPMENT; ENGINE. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings. |
| PIP5569A | 2019-06-03. Service bulletin. ENGINE; FUEL SYSTEM, GASOLINE. This Preliminary information communicates to the dealer an issue where the vehicle's engine may crank over unprompted and not start afterward. This is the result of hooking up the Active Fuel Injector Tool incorrectly on vehicles equipped with a direct fuel injection system. This Preliminary information instructs the dealer of a repair kit they received that will prevent this issue when installed correctly. |
| PIP4670F | 2019-06-03. Service bulletin. ENGINE; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles. |
| 19NA066 | 2019-05-20. Service bulletin. ENGINE. This technical bulletin provides a procedure to replace the oil filter insert if found missing or damaged and the cause of the customers concern. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.