Service bulletins for the 2019 GMC Acadia
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
825 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Driver assistance are shown. Show all
| 21NA063 | 2021-05-24. Service bulletin. BACK OVER PREVENTION. This technical bulletin provides a procedure on a flutter and/or buzz type noise heard from the rear of the vehicle. |
|---|---|
| 21NA030 | 2021-05-24. Service bulletin. BACK OVER PREVENTION. This service bulletin provides a procedure to correct a customer concern of Engine Noise and/or Belt Squeak, MIL Illuminated. |
| PIP5694C | 2021-04-19. Service bulletin. BACK OVER PREVENTION. This Preliminary information communicates noise condition that has been identified and the repair that is in process. A special Labor Operation was added for tracking purposes only. All models associated with the in process repair have been added to this PI. |
| PIT5551F | 2020-11-16. Service bulletin. FORWARD COLLISION AVOIDANCE. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". |
| PIT5700B | 2020-04-13. Service bulletin. FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. This Preliminary information communicates that a vehicle may come to the dealer with a "service front camera" message. The technician is instructed to use the data bus tool to determine if the front view camera module and active safety module are both communicating on the low speed bus. If the technician determines that one of the modules is not communicating on low speed the tech is instructed of areas to inspect the low speed communication line, 5060 for possible opens and repair them per SI. |
| N192282480 | 2020-02-18. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE; BACK OVER PREVENTION. Customer Satisfaction Program. Certain vehicles, may have several wires going to the body control module (BCM) damaged due to the installation/removal of the aftermarket LoJack alarm system from the vehicle. Dealer will inspect the wires going to the BCM and knee bolster for evidence that a LoJack alarm system was removed and repair as necessary. |
| PIC6048M | 2020-02-10. Service bulletin. LANE DEPARTURE; STEERING. This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. The Lane Keep Assist icon is solid amber, Forward Camera Module is actively commanding a torque to Electronic Power Steering. This means that the driver should also feel some feedback from the steering wheel. No Chimes or haptic in the seat. Lane Keep Assist icon is flashing amber; Forward Camera Module is actively commanding torque to Electronic Power Steering. This will also be accompanied with Lane Departure Warning chimes and haptic in the seat feedback based on the setting chosen in the vehicle settings. This will take place when the vehicle has crossed lane marking by (40 cm) or (15.75 in). |
| PIC6048L | 2020-01-21. Service bulletin. LANE DEPARTURE. This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. The Lane Keep Assist icon is solid amber, Forward Camera Module is actively commanding a torque to Electronic Power Steering. This means that the driver should also feel some feedback from the steering wheel. No Chimes or haptic in the seat. Lane Keep Assist icon is flashing amber; Forward Camera Module is actively commanding torque to Electronic Power Steering. This will also be accompanied with Lane Departure Warning chimes and haptic in the seat feedback based on the setting chosen in the vehicle settings. This will take place when the vehicle has crossed lane marking by (40 cm) or (15.75 in). |
| PIT5535E | 2019-11-12. Service bulletin. LANE DEPARTURE. This Preliminary Information communication provides information to the technician about vehicles that may have Service Front Camera, Service Lane Departure Warning, and Service Lane Keep Assist Message. Technician may find Diagnostic Trouble Code B1008 Sym 4B set. Technician will need to check the windshield to ensure it is not aftermarket. Technician will also check for anything that may impair the front view camera and ensure the camera is properly mounted. |
| PIT5551E | 2019-11-12. Service bulletin. FORWARD COLLISION AVOIDANCE. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". |
| PIC6048K | 2019-10-15. Service bulletin. ELECTRICAL SYSTEM; LANE DEPARTURE. This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. The Lane Keep Assist icon is solid amber, Forward Camera Module is actively commanding a torque to Electronic Power Steering. This means that the driver should also feel some feedback from the steering wheel. No Chimes or haptic in the seat. Lane Keep Assist icon is flashing amber; Forward Camera Module is actively commanding torque to Electronic Power Steering. This will also be accompanied with Lane Departure Warning chimes and haptic in the seat feedback based on the setting chosen in the vehicle settings. This will take place when the vehicle has crossed lane marking by (40 cm) or (15.75 in). |
| PIT5551E | 2019-10-15. Service bulletin. FORWARD COLLISION AVOIDANCE. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". |
| PIC6123D | 2019-09-16. Service bulletin. ELECTRICAL SYSTEM; LANE DEPARTURE; ENGINE; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. This Preliminary Information communication provides information to the technician for the adaptive cruise control or lane keep assist unavailable message in the driver?s information center after the vehicle has been parked in direct sunlight and high ambient temperatures. The cameras electronic control unit?s internal operating temperature range is -40 degrees Celsius to 85 degrees Celsius. If the temperature of the electronic control unit of the camera module exceeds 85 degrees Celsius the image processor will no longer function resulting in adaptive cruise control and lane keep assist to be unavailable until the temperature falls to below the maximum operating temperature range |
| PIT5535D | 2019-08-12. Service bulletin. LANE DEPARTURE. This Preliminary Information communication provides information to the technician about vehicles that may have Service Front Camera, Service Lane Departure Warning, and Service Lane Keep Assist Message. Technician may find Diagnostic Trouble Code B1008 Sym 4B set. Technician will need to check the windshield to ensure it is not aftermarket. Technician will also check for anything that may impair the front view camera and ensure the camera is properly mounted. |
| PIT5551D | 2019-06-10. Service bulletin. FORWARD COLLISION AVOIDANCE. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". |
| PIC6048J | 2018-12-17. Service bulletin. LANE DEPARTURE; SEATS. This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. The Lane Keep Assist icon is solid amber, Forward Camera Module is actively commanding a torque to Electronic Power Steering. This means that the driver should also feel some feedback from the steering wheel. No Chimes or haptic in the seat. Lane Keep Assist icon is flashing amber; Forward Camera Module is actively commanding torque to Electronic Power Steering. This will also be accompanied with Lane Departure Warning chimes and haptic in the seat feedback based on the setting chosen in the vehicle settings. This will take place when the vehicle has crossed lane marking by (40 cm) or (15.75 in). |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.